kaerf
|
|
July 24, 2013, 05:42:33 PM |
|
happy bday, dave.
|
|
|
|
Morblias
|
|
July 24, 2013, 07:56:26 PM |
|
First prototype of Bitfury S-HASH board is hashing: Features: - 16 Bitfury ASIC capacity
- Adjustable (through 0805 SMT resistor) voltage regulator between 0.7 and 0.9V
- Core voltage regulator has 50A capacity, so chips can be overclocked.
- On-board ARM Cortex M3 processor with standard RJ-45 100 Mbps Ethernet port.
- Built-in mining software can operate stand-alone. No PC or Raspberry PI needed, just an internet connection.
- TCP/IP stack with DHCP and DNS support. Just fill in pool server name, port number, username and password.
- Support for Stratum and backup mining pools.
- Built-in small webserver for chip status/speed reports.
- PCB temperature sensor, could be used for automatic shutdown when temperature gets too high.
If you don't have the budget for a large number of chips, overclocking is the best option, as it will get you 40GH/sec out of a card (probably more with better cooling), instead of 25GH for a standard H-CARD for the same 16 chips. At 40GH/sec, the card uses about 35 Watts, running off a standard 12V DC supply. 40GH/s with only PC fans blowing onto the chips and no heat sink! Wow!
|
Tips / Donations accepted: 1Morb18DsDHNEv6TeQXBdba872ZSpiK9fY
|
|
|
jflowers
Newbie
Offline
Activity: 40
Merit: 0
|
|
July 24, 2013, 08:22:43 PM |
|
This is looking more and more fun by the minute. Can't wait until these goodies arrive in my hand.
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
July 24, 2013, 08:40:03 PM |
|
Will someone please make these for us less technical schmucks.
|
|
|
|
Soros Shorts
Donator
Legendary
Offline
Activity: 1617
Merit: 1012
|
|
July 24, 2013, 08:55:04 PM |
|
Does this mean the 400GH/s kit can made to easily go up to 640GH/s? What's required to do this? Changing some resistors and crystals?
|
|
|
|
nullspot
Newbie
Offline
Activity: 31
Merit: 0
|
|
July 24, 2013, 09:02:48 PM |
|
First prototype of Bitfury S-HASH board is hashing: Features: - 16 Bitfury ASIC capacity
- Adjustable (through 0805 SMT resistor) voltage regulator between 0.7 and 0.9V
- Core voltage regulator has 50A capacity, so chips can be overclocked.
- On-board ARM Cortex M3 processor with standard RJ-45 100 Mbps Ethernet port.
- Built-in mining software can operate stand-alone. No PC or Raspberry PI needed, just an internet connection.
- TCP/IP stack with DHCP and DNS support. Just fill in pool server name, port number, username and password.
- Support for Stratum and backup mining pools.
- Built-in small webserver for chip status/speed reports.
- PCB temperature sensor, could be used for automatic shutdown when temperature gets too high.
If you don't have the budget for a large number of chips, overclocking is the best option, as it will get you 40GH/sec out of a card (probably more with better cooling), instead of 25GH for a standard H-CARD for the same 16 chips. At 40GH/sec, the card uses about 35 Watts, running off a standard 12V DC supply. 40GH/s with only PC fans blowing onto the chips and no heat sink! Wow! To avoid confusion, please note this image and the specs do NOT refer to the same Bitfury 55nm ASIC H-Board being sold by megabigpower. This is a modified prototype board, with very different features from the H-Boards we've been discussing so far on this thread. In particular, this kit is a self-contained miner, not requiring a master board to plug into, and has different components which allow the overclocking (which will not be possible with the current H-Board out of the box AFAIK).
|
|
|
|
tom99
|
|
July 24, 2013, 09:04:08 PM |
|
Hboard need to change one of resistor I think to 1.9k and go back of post by Dave for OC.
|
|
|
|
minternj
|
|
July 24, 2013, 09:08:38 PM |
|
Is there any chance of retrofitting current H model boards for a little overclocking? I have no fear of a solder iron. The voltage regulator on the H-CARD has a 30A capacity, which limits the overclocking range, and there are no simple replacements for the regulator. This is what cscape said about overclocking the Hcard.
|
|
|
|
tacotime
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
July 24, 2013, 09:09:18 PM |
|
Does this mean the 400GH/s kit can made to easily go up to 640GH/s? What's required to do this? Changing some resistors and crystals?
They will do about 614 GH/s. Please see: https://bitcentury.io/blog/initial-testing-of-bitfury-asicAt 0.8 V and clock of 54, these chips get 2.4 GH/s each. 16 H boards x 16 chips per H board x 2.4 GH/s per chip = 614.4 GH/s. Note that this is 614.4 GH/s at stock voltage. The H boards as sold here appear to be 0.8 v running at a clock of 48 for 1.5 GH/s per chip, or 24 GH/s per H board. So the 50% increase in hash power should be easily achievable.
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
sunniestsolomin
Newbie
Offline
Activity: 47
Merit: 0
|
|
July 24, 2013, 09:11:57 PM |
|
Does this mean the 400GH/s kit can made to easily go up to 640GH/s? What's required to do this? Changing some resistors and crystals?
They will do about 614 GH/s. Please see: At 0.8 V and clock of 54, these chips get 2.4 GH/s each. 16 H boards x 16 chips per H board x 2.4 GH/s per chip = 614.4 GH/s. These are not the same boards.
|
|
|
|
tacotime
Legendary
Offline
Activity: 1484
Merit: 1005
|
|
July 24, 2013, 09:15:15 PM Last edit: July 24, 2013, 09:50:59 PM by tacotime |
|
Does this mean the 400GH/s kit can made to easily go up to 640GH/s? What's required to do this? Changing some resistors and crystals?
They will do about 614 GH/s. Please see: At 0.8 V and clock of 54, these chips get 2.4 GH/s each. 16 H boards x 16 chips per H board x 2.4 GH/s per chip = 614.4 GH/s. These are not the same boards. No, but Dave has stated in this thread that the H board's voltage reg maxes out at 0.8 V, which is the apparent stock voltage. So, all one needs to do is adjust the clock. edit: Apparently H board v reg maxes out at 30 A and stock voltage is 0.65 V, so you will need to modify the resistor to get voltage up beyond that This post seems to specify that achieving this performance on an H board will be difficult without extensive modification to replace both the resistor and the v reg cscape, a few of us are wondering how much the h-card can be overclocked to. Have you tested that? We know that it is limited to the regulator.
30A reg maxout is on the board. 40A max at core limit. There is no reg subtitute with higer limits (as I know, I already tried to find). To maximaze the chips hashrate we might need board with less chips. dave and cscape qutoes; For 0.65V you need exactly 1K resistor for R01F. For 0.70V you need 1.5K. With 1K resistor I get 1.26Amps @ 12.0 V, so 15Watts for an h-board. [edit] Remember, with 16 chips, soldering that higher value resistor will quickly max out the amps that the regulator can handle. The 2.7GH/sec result I got with a single ASIC test board required 2.5A, and 0.835V. If you were to attempt that on the whole board, the total current of 40A would exceed the capabilities of the regulator. -------- btw great work cscape, awesome! Picture is kind of look but can not touch Come on investors, grab this oportunity!
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
-Redacted-
|
|
July 25, 2013, 12:46:43 AM |
|
And if I was interested in buying a number of the c-scape boards ??
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
July 25, 2013, 01:06:32 AM |
|
And if I was interested in buying a number of the c-scape boards ??
You would be one of many.
|
|
|
|
buzzdave (OP)
VIP
Sr. Member
Offline
Activity: 472
Merit: 250
|
|
July 25, 2013, 01:13:01 AM |
|
It would take a little more than a resistor to OC the H-boards. The main issue is the regulator (30A), which would have to be upgraded to a 50A. The input resistor would then also need to be changed. Making the whole rig work from there could require a lot of work - we don't know at this time.
Please don't take any of my info as any kind of support for overclocking our boards. We can't help you achieve it, nor can we provide any kind of warranty coverage if you attempt to OC them. We also don't know yet what the longevity of the BitFury chip is at different clock voltages.
This *is* pretty frigging awesome though - nice job C-Scape!
|
|
|
|
Morblias
|
|
July 25, 2013, 01:15:02 AM |
|
And if I was interested in buying a number of the c-scape boards ??
You would be one of many. haha yeah for sure! No plans yet, just having fun. I will not be doing any manufacturing or retail selling myself, but I'm open for collaborations with other companies.
|
Tips / Donations accepted: 1Morb18DsDHNEv6TeQXBdba872ZSpiK9fY
|
|
|
|
Morblias
|
|
July 25, 2013, 02:28:08 PM |
|
|
Tips / Donations accepted: 1Morb18DsDHNEv6TeQXBdba872ZSpiK9fY
|
|
|
tom99
|
|
July 25, 2013, 02:53:02 PM |
|
Maybe you meant June 24, 2012 and 23 almost done now.
|
|
|
|
CryptoCluster
Member
Offline
Activity: 84
Merit: 10
|
|
July 25, 2013, 02:58:34 PM |
|
Maybe you meant June 24, 2012 and 23 almost done now. Its "almost done" for a month now :-)
|
"The cumulative development of a medium of exchange on the free market — is the only way money can become established. ... government is powerless to create money for the economy; it can only be developed by the processes of the free market." M. N. Rothbard
|
|
|
piecinitup
|
|
July 25, 2013, 03:54:19 PM |
|
Has anyone requested and received a refund on any order? I requested Sunday (July 21st) afternoon.(having a baby so I can't justify it). Dave has replied to most of my messages but seems to be stalling. I really didn't want to bring this to the thread's attention but it seems like pretty bad business practice. I understand that it's a very busy time but I've been waiting 4 days now. Any advice?
|
https://1broker.com/?r=34050 1broker is the easiest way to trade other markets than crypto using BTC! Copy successful traders or just trade yourself!
|
|
|
|