[ANN] Philosopherstone - PHS | No Premine | Mandatory update 1.2Beta3

[Molitor]

I deleted the blockchain, added the suggested nodes and I am attempting to resync.  Stuck at 6084 like everyone else.

delete the blockchain and fire up 1.0 or 1.1 and see if you get further than 6084

I pulled 1.2 from github and I don't have the source for 1.0 or 1.1 anymore.  Does anyone have a link to 1.0 or 1.1 source?

I think I have 1.1 or 1.0. I pulled the zip from my garbage can, and it doesn't identify the version.

Compile it and check the version.  If it isn't 1.2, can you post it somewhere?

Check your PM.


ALIEN:
It unsynced back ~25 blocks. I'll switch to 1.2 in a few.

[1714171042]

1714171042

[1714171042]

1714171042

[1714171042]

1714171042

[2Kool4Skewl]

What is the current block height for the correct chain?

[Molitor]

Ok, I clean out everything but wallet and conf.

I start 1.0 and it syncs up for a few minutes then jumps back about ~25 blocks. If I switch to 1.2 at this point, it stays there.

If I clean-start 1.0, and as soon as it syncs, close it and switch to 1.2, then 1.2 syncs. I just solo-mined a block.

Of course, every. single. time. I say it's syncs, then hit the POST button here, it unsyncs.

My conf:
rpcuser=xxxxxx
rpcpassword=xxxxxx
listen=1
daemon=1
server=1
rpcport=16282
rpcconnect=127.0.0.1
addnode=24.6.21.198
addnode=46.150.89.173
addnode=64.120.17.149
addnode=70.29.193.48
addnode=125.79.142.201


{
"blocks" : 8614,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.94503007,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 35124020,
"pooledtx" : 0,
"testnet" : false
}

[Molitor]

My block didn't actually show up in my wallet, but I'll rescan later, I'm just going to stay synced on the blockchain for now. I guess the secret is you have to switch from 1.0 to 1.2 while you're synced, and hope no one finds a block while you're switching.

It's keeping up with new blocks.

{
"blocks" : 8617,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 1.11602125,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 42613200,
"pooledtx" : 0,
"testnet" : false
}


This is more like the hedge maze in The Shining than a fork.

[2Kool4Skewl]

1.2 is still not syncing

[Molitor]

1.2 is still not syncing

I've stayed synced. The couple blocks I've mined appear to be orphans, but I can send money to myself. I've sinces set my router to DMZ and I have 21 connections, before it was ~7. I'll feel better when I actually get a block that sticks.

Here's what I did:

1. Delete everything but conf and wallet.dat.
2. Run 1.0 and wait until it syncs.
3. When it syncs, immediately switch to 1.2.
4. When 1.2 loads, it should still be synced, if not, I guess someone got a block while you were switching and you have to start over.

That's what worked for me. I posted my conf file previously. I'm here now:

{
"blocks" : 8661,
"currentblocksize" : 1611,
"currentblocktx" : 2,
"difficulty" : 0.67596002,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 22662274,
"pooledtx" : 2,
"testnet" : false
}

I've restarted and rescanned, and it stays synced, but I haven't left the wallet closed to get many blocks behind.

[2Kool4Skewl]

1.2 is still not syncing

I've stayed synced. The couple blocks I've mined appear to be orphans, but I can send money to myself. I've sinces set my router to DMZ and I have 21 connections, before it was ~7. I'll feel better when I actually get a block that sticks.

Here's what I did:

1. Delete everything but conf and wallet.dat.
2. Run 1.0 and wait until it syncs.
3. When it syncs, immediately switch to 1.2.
4. When 1.2 loads, it should still be synced, if not, I guess someone got a block while you were switching and you have to start over.

That's what worked for me. I posted my conf file previously. I'm here now:

{
"blocks" : 8661,
"currentblocksize" : 1611,
"currentblocktx" : 2,
"difficulty" : 0.67596002,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 22662274,
"pooledtx" : 2,
"testnet" : false
}

I've restarted and rescanned, and it stays synced, but I haven't left the wallet closed to get many blocks behind.

I'm back on 1.0 and only synced to block 8562.  It's been running for a while.  I guess I'll see if it ever catches up and try to switch over to 1.2 again.

I thought it was synced earlier and switched to 1.2, but it didn't keep sync.

If anyone has any PHS they want to sell PM me.

[Molitor]

1.2 is still not syncing

I've stayed synced. The couple blocks I've mined appear to be orphans, but I can send money to myself. I've sinces set my router to DMZ and I have 21 connections, before it was ~7. I'll feel better when I actually get a block that sticks.

Here's what I did:

1. Delete everything but conf and wallet.dat.
2. Run 1.0 and wait until it syncs.
3. When it syncs, immediately switch to 1.2.
4. When 1.2 loads, it should still be synced, if not, I guess someone got a block while you were switching and you have to start over.

That's what worked for me. I posted my conf file previously. I'm here now:

{
"blocks" : 8661,
"currentblocksize" : 1611,
"currentblocktx" : 2,
"difficulty" : 0.67596002,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 22662274,
"pooledtx" : 2,
"testnet" : false
}

I've restarted and rescanned, and it stays synced, but I haven't left the wallet closed to get many blocks behind.

I'm back on 1.0 and only synced to block 8562.  It's been running for a while.  I guess I'll see if it ever catches up and try to switch over to 1.2 again.

I thought it was synced earlier and switched to 1.2, but it didn't keep sync.

If anyone has any PHS they want to sell PM me.

I did run repairwallet. I lost ~100 coins, I don't know if that has anything to do with anything. The log file is still a wall of errors, but they could be "normal" errors.

{
"blocks" : 8668,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.51186022,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 16469643,
"pooledtx" : 0,
"testnet" : false
}

Things appear back to normal for me. I'd send you the blockchain but I'm on Windows and I don't think they'd work. I just mined 0.26 PHS, so it's staking, but it hasn't been confirmed and I'm going to bed. Can't wait to see what horrors await tomorrow.

[Molitor]

My 0.26 Mined was just confirmed, but not matured. This was mined  8/10/2013 @ 01:38 US Eastern.


{
"blocks" : 8674,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.52128988,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 16611274,
"pooledtx" : 0,
"testnet" : false
}

[2Kool4Skewl]

Still three blocks behind you @ 8671

[DogtownHero]

what the shit is up with this coin

[Palmdetroit]

Current:

{
"blocks" : 8685,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.48990073,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 15604283,
"pooledtx" : 0,
"testnet" : false
}

Wanted to say stake is now generating on 1.2 again...

I do have the complete block chain for windows if someone wants/knows how to use the blk files to get caught up

[denned]

block chain 8715+
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar

my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw

ps: if bad synchronization
1. remove any node
2. turn off / on the client

[r3wt]

block chain 8715+
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar

thanks, it works but two things:

1.when you download from mediafire, a malware popup is displayed when you click the link

2.client still gets stuck trying to download more blocks

[trid]

block chain 8715+
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar

my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw

I sent a few coins for the test - on my side everything is working well

transaction ID - e7501d8ed251540fd49281c2e6a99974af2119ccac73085a9f9f5ad95857773e

[Palmdetroit]


{
"blocks" : 8730,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 1.03583170,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 33462679,
"pooledtx" : 0,
"testnet" : false
}


If you guys who dled the files can compare real quick but I think everything is fine as mining speed has doubled+ and now my cpus having hard time at mining 

[r3wt]


{
"blocks" : 8730,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 1.03583170,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 33462679,
"pooledtx" : 0,
"testnet" : false
}


If you guys who dled the files can compare real quick but I think everything is fine as mining speed has doubled+ and now my cpus having hard time at mining  

8730 of 8734 on my end

edit, it changed from 8734 to 8732

[denned]

block chain 8715+
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar

my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw

I sent a few coins for the test - on my side everything is working well

transaction ID - e7501d8ed251540fd49281c2e6a99974af2119ccac73085a9f9f5ad95857773e

http://i50.fastpic.ru/big/2013/0810/84/be7ef0cf807f0585c29c6f110db61e84.png

Thanks!

[r3wt]

all is well on my end, except the coins are still missing... bummer

Code:

03:04:06

{
"blocks" : 8735,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.90929903,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 29132165,
"pooledtx" : 0,
"testnet" : false
}

[Palmdetroit]

block chain 8715+
insert to AppData\Roaming\
http://www.mediafire.com/download/9va4untmkcex2dr/Philosopherstone.rar

my wallet 9cJuf7DaSE13ix5Mfq4P31LxcQ9SuoZYiw

I sent a few coins for the test - on my side everything is working well

transaction ID - e7501d8ed251540fd49281c2e6a99974af2119ccac73085a9f9f5ad95857773e

Thanks!

yup so much for cpu miners