[ANN] StarTrek insipred coins =) and mining links (Low Diff) Nice Bounties!

[daemonfox]

I need more Latinum Now ! Wheres my win 7 x64 pool miner? Thats it i am throwing a fit! Cassie kicks screams and throws here self on the floor crying ..... < End Sarcasm >

Compiling for Win 64 has been a no go... same issues as dream... after several attempts, changes and compiles... errors still.

Work in progress... unlesssomeone else more adept can step in and make these for each CPU optimization.

[darksoft]

They still mine great using GPUs... mined a shit ton yesterday, solo...

[truckythin]

anyone still mine KED? is this coin still alive?

[Scooby903]

anyone still mine KED? is this coin still alive?

I started back yesterday when the diff was at .02...it's now up to .12

[maxsolnc]

anyone still mine KED? is this coin still alive?

yes

[daemonfox]

I ran both of my amd ii x4 645's and only got 0.60 gpl. The difficulty is at 0.09922149, now .
Special thanks to daemonfox helping get the wallet

I will see about compiling the CPU miner into windows so you can mine the pool. No guarantees, but it is something I need to set up anyhow and have been putting off for some time.

Detailed Windows build instructions, using MinGW (64-bit):
   Install MinGW and the MSYS Developer Tool Kit (http://www.mingw.org/)
      * Choose C, C++ and MSys on install and select to have it update its libraries
      * Install into C:\MinGW
      * Add C:\MinGW\bin and c:\MinGW\msys\1.0 to your path
   Download MinGW64 from http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Automated%20Builds/
      * Choose mingw-w64-bin_i686-mingw_20111220.zip
      * Extract ZIP to C:\MinGW64
      * Add C:\MinGW64\bin to your path before C:\MinGW\bin
   Install libcurl devel (http://curl.haxx.se/download.html)
      * download curl-7.30.0.tar.gz from http://curl.haxx.se/download.html and put it in C:\deps\
      * launch an MSYS shell and enter the following commands (the configure step will take a long time!)
         cd /c/deps
         tar -xvzf curl-7.30.0.tar.gz
         cd curl-7.30.0
         ./configure --host=x86_64-w64-mingw32 –-prefix=/c/mingw64
         make
         make install
         cp /c/deps/curl-7.30.0/docs/libcurl/libcurl.m4 /c/mingw/share/aclocal/libcurl.m4
   Install pthreads
      * download pthreads-20100604.zip from http://sourceforge.net/projects/mingw-w64/files/External%20binary%20packages%20%28Win64%20hosted%29/pthreads/ and put it in C:\deps\
      * unzip the file to c:\deps\
      * In the mingw64 subdirectory is pthreads-w64.zip - extract the contents to C:\MinGW64
   In the MSYS shell, navigate to the CPUminer source code direcctory
      * You will likely get higher hashrates by forcing the compiler to build the executable for your
        specific CPU architecture.  This is done by adding "-march=<value>" into the CFLAGS.  Those
        values can be found at http://gcc.gnu.org/onlinedocs/gcc/i386-and-x86_002d64-Options.html
           common choices for intel are : core2, corei7, corei7-avx
           common choices for AMD are : athlon-fx
                       or -msse2,-msse3,-msse4,-mavx ...
      * Execute the following (replacing the value of -march with the value for your CPU type)
         ./autogen.sh
         ./configure --host=x86_64-w64-mingw32 CFLAGS="-O3 -march=core2"
         make
   Strip minerd.exe
      * In a command prompt, in the compilation directory, execute the following
         x86_64-w64-mingw32-strip minerd.exe
   Combine the executables with the dependencies
      * copy minerd.exe, C:\MinGW64\bin\libcurl-4.dll, and C:\MinGW64\bin\pthreadGC2-w64.dll to the same directory

Mr. ig0tik3d some assistance please...

The current curl library is 7.32.0 but after I ./configure ... I make and get errors:
Assembler Message:
Local\Temp\ccdZNlvk.s:234: Error: expecting string instruction after *rep'
Local\Temp\ccdZNlvk.s:237: Error: expecting string instruction after *rep'
make[2]: *** [libcurl_la-hostip.lo] Error 1
make[2]: Leaving directory */c/deps/curl-7.32.0/lib
make[1]: ***[all] Error 2
make[1]: Leaving directory */c/deps/curl-7.32.0/lib
make: *** [all-recursive] Error 1

What did I do wrong? Everything I try I get to libcurl and have problems... or in the one instance I got past those steps, I get multiple errors when I try to complete the miner build steps.

[scificoin]

any word on an official site or forums for ufc, ked, or gpl?

Yep!  I thought I already answered a similar question before regarding this.

The domains are purchased but we will not do anything for promotion of the coin until our exchange is up and running.  At the moment we are looking a 2 weeks for beta testing.

In a month or so when the exchange is up and running  (2 weeks is just for beta) we will then begin the onslaught and begin contacting as many forums and scifi, comic, fantasy stores as possible.  We will start to really push for acceptance.  These coins will succeed!

But for now we are low key.  Non of the coins will be abandoned, and there is a wealth of ideas.  But first the exchange is the linchpin.

The exchange will create a whole new world for these coins, without it I can not sell the idea, and the domains are pointless until then.  In 1 month these coins will start to blossom, until then we are not actively not promoting them.

[bitcoinextra]

I have been using this scrypt-jane miner at http://rghost.ru/48162507

After the download I renamed the .exe to GPLminer  then I put the scrypt-jane folder in easy to find place so when using your cmd prompt you navigate to it easy. Once you are in your cmd prompt, navigate to the folder the GPLminer.exe file is in. Then start it up with this cmd line to mine on the pool. (copy and paste if you need to)

GPLminer --scrypt -o gplcoin.com:8888 -u yourworker -p yourpassword --Nfmin 4 --Nfmax 30 --StartT 1377557832 -I 17

To mine solo use this: Make sure you have the GPL wallet software running and sync for this.

GPLminer --scrypt -o localhost:8344 -u yourworker -p yourpassword --Nfmin 4 --Nfmax 30 --StartT 1377557832 -I 17


I have been using it on a Win8 64-bit Machine that I use for mining new coins seems everything has been stable so far for the 2 days I have been mining. (Solo and Pool mining)

I Will be throwing another machine on the pool soon once maintenance is done.

Hope that helps people that have not been able to compile the GPL GPUminer that dreamwatcher Kickedass on.

Thanks again for the Pool and Miner.

Scificoin thanks for the coin, I will keep an eye for the Scificoin exchange.

My spidey sense is tingling that a Marvel theme coin is maybe incoming

Edit: There is also a Win64 CPUminer thanks to ig0tik3d found below this post vvvv

[ig0tik3d]

cpu miner for gpl (win64) (if not wrong nChainStartTime = 1377557832  )
https://docs.google.com/file/d/0B9cvOfoOekSdSnUtSmltRVQ2WFk/edit?usp=sharing
example start:

Code:

minerd -a scrypt-jane -o stratum+tcp://gplcoin.com:8888 -u workername -p workerpass

p.s. for gpu miner --Nfmin 4 --Nfmax 30 --StartT 1377557832 (if in source code is right this parameter )

[daemonfox]

I have been using this scrypt-jane miner at http://rghost.ru/48162507

After the download I renamed the .exe to GPLminer  then I put the scrypt-jane folder in easy to find place so when using your cmd prompt you navigate to it easy. Once you are in your cmd prompt, navigate to the folder the GPLminer.exe file is in. Then start it up with this cmd line to mine on the pool. (copy and paste if you need to)

GPLminer --scrypt -o gplcoin.com:8888 -u yourworker -p yourpassword --Nfmin 4 --Nfmax 30 --StartT 1377557832 -I 17

To mine solo use this: Make sure you have the GPL wallet software running and sync for this.

GPLminer --scrypt -o localhost:8344 -u yourworker -p yourpassword --Nfmin 4 --Nfmax 30 --StartT 1377557832 -I 17


I have been using it on a Win8 64-bit Machine that I use for mining new coins seems everything has been stable so far for the 2 days I have been mining. (Solo and Pool mining)

I Will be throwing another machine on the pool soon once maintenance is done.

Hope that helps people that have not been able to compile the GPL GPUminer that dreamwatcher Kickedass on.

Thanks again for the Pool and Miner.

Scificoin thanks for the coin, I will keep an eye for the Scificoin exchange.

My spidey sense is tingling that a Marvel theme coin is maybe incoming

Edit: There is also a Win64 CPUminer thanks to ig0tik3d found below this post vvvv

ybcminer.exe --scrypt --Nfmin 4 --Nfmax 30 --StartT 1377557867 is what i have succesfully been mining with... the value you have was the original launches value... yet it works?

cpu miner for gpl (win64) (if not wrong nChainStartTime = 1377557832  )
https://docs.google.com/file/d/0B9cvOfoOekSdSnUtSmltRVQ2WFk/edit?usp=sharing
example start:

Code:

minerd -a scrypt-jane -o stratum+tcp://gplcoin.com:8888 -u workername -p workerpass

p.s. for gpu miner --Nfmin 4 --Nfmax 30 --StartT 1377557832 (if in source code is right this parameter )

And this has also worked for you? Is this a compile of the source dream put up?

So how important is the StartT parameter?

EDIT: Tested and approved you ROCK ig0tik3d! Post GPL addy you deserve some coin.

Given the issues some have with google docs 404 pages... I have added this to my Mega account as well after adding a start.bat file to it. YOU MUST EDIT THIS FILE WITH YOUR USERNAME AND PASSWORD FOR THE POOL OR YOUR .conf FILE IF SOLO MINING!!!!!

GPL CPU Miner

[dreamwatcher]

1377557832 is the official Chain start time set in main.cpp of the GPL source code:

Code:

int64 nChainStartTime = 1377557832;

So that is the start time I used in both the GPU and CPU miners.

Edit: Also the stratum software in the pool uses this start time.

[ig0tik3d]

So how important is the StartT parameter?

Code:

unsigned char GetNfactor(unsigned int nTimestamp) {
    int l = 0;
    if (nTimestamp <= StartT)
        return 4;
    unsigned long int s = nTimestamp - StartT;
    while ((s >> 1) > 3) {
      l += 1;
      s >>= 1;
    }
    s &= 3;
    int n = (l * 170 + s * 25 - 2320) / 100;
    if (n < 0) n = 0;
    if (n > 255)
        printf("GetNfactor(%d) - something wrong(n == %d)\n", nTimestamp, n);
    unsigned char N = (unsigned char)n;
      if(N<minNfactor) return minNfactor;
    if(N>maxNfactor) return maxNfactor;
    return N;
}

if StartT will be wrong, n factor will be calculated wrong ....

[marcetin]

I have add those coins to Crypto-currency directory.

Please submit any new info, pools, exchanges.

Thank you!

[dreamwatcher]

I have add those coins to Crypto-currency directory.

Please submit any new info, pools, exchanges.

Thank you!

104 coins!!

When CCE3 is finished , I had planned on supporting all the coins.

104....I am going to need some more VPS 

[bitcoinextra]

Sorry deamonfox caught that quick I thought I fix it fast enough.

That was a simple copy and paste error. On the StartT value but it is very important not to mess that up.

Sorry again but this should work :

scrypt-jane miner at http://rghost.ru/48162507



Pool mining:

Code:

ybcminer --scrypt -o gplcoin.com:8888 -u yourworker -p yourpassword --Nfmin 4 --Nfmax 30 --StartT 1377557832 -I 17

Sole Mining:Make sure you have the GPL wallet software running and sync for this.

Code:

ybcminer --scrypt -o localhost:8344 -u yourworker -p yourpassword --Nfmin 4 --Nfmax 30 --StartT 1377557832 -I 17

[cassieheart]

Big thanks to bitcoinextra for the miner Also is there a 32 bit version of a pool miner for gpl or did i miss it in the sea of threads?

[jonoiv]

I have also been using the scrypt-jane_gpu.zip miner

I launch it with this,

Code:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ybcminer --Nfmin 4 --Nfmax 30 --StartT 1377557876

the first time you run the batch file above you will need to manually add the URL and PW.  and then save a config file same as CGminer.  by pressing "s" then "w", then enter, enter.

runs like a dream.  no issues, no need to rename the exe.

[daemonfox]

I have also been using the scrypt-jane_gpu.zip miner

I launch it with this,

Code:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ybcminer --Nfmin 4 --Nfmax 30 --StartT 1377557876

the first time you run the batch file above you will need to manually add the URL and PW.  and then save a config file same as CGminer.  by pressing "s" then "w", then enter, enter.

runs like a dream.  no issues, no need to rename the exe.

Same here... I posted my bat file contents earlier in the thread is a code window with the same --StartT as you... it is not the StartT dream and bitcoinextra are using... and i am now using the one they posted and mining so... not sure which is correct.

[truckythin]

are you guys using ybminer to mine KED?  cgminer doesn't work?

[dreamwatcher]

are you guys using ybminer to mine KED?  cgminer doesn't work?

CGminer works fine for KED and UFC.

The special miners are for Gold Pressed Latinum (GPL) which is a Yacoin based coin.