dnssandbox
Jr. Member
Offline
Activity: 57
Merit: 5
|
|
February 07, 2018, 09:40:56 PM |
|
I over clocked.
Running 662 GH/S (avg) 917.49
Temps: 71 70 73
The trick i used was to set the speed, then reboot until I got the temps I wanted. Then leave it alone.
|
|
|
|
STATIK
Jr. Member
Offline
Activity: 162
Merit: 2
|
|
February 08, 2018, 12:28:14 AM |
|
Who else have overclocked their a3 miners / at what and how is it performing?
I've set 644 on 24h average 890gh ambient temp 25F chip temps vary 70-81with chain 2 or 3 usually running highest
|
|
|
|
STATIK
Jr. Member
Offline
Activity: 162
Merit: 2
|
|
February 08, 2018, 12:29:13 AM |
|
I over clocked.
Running 662 GH/S (avg) 917.49
Temps: 71 70 73
The trick i used was to set the speed, then reboot until I got the temps I wanted. Then leave it alone.
How long have you ran it like this so far?
|
|
|
|
greyday
Member
Offline
Activity: 434
Merit: 52
|
|
February 08, 2018, 01:18:54 AM |
|
Who else have overclocked their a3 miners / at what and how is it performing?
I've set 644 on 24h average 890gh ambient temp 25F chip temps vary 70-81with chain 2 or 3 usually running highest I've been running 650 for about a week now with no problems. Same temp range (70-81) averaging around 900gh. Runs in a basement with room temps around 50-55F.
|
|
|
|
dnssandbox
Jr. Member
Offline
Activity: 57
Merit: 5
|
|
February 08, 2018, 03:21:53 AM |
|
I over clocked.
Running 662 GH/S (avg) 917.49
Temps: 71 70 73
The trick i used was to set the speed, then reboot until I got the temps I wanted. Then leave it alone.
How long have you ran it like this so far? I have been running it like that for over 5 days. Once I saw the chain 3 temp at 74. that is as high as it has gone. I over clocked.
Running 662 GH/S (avg) 917.49
Temps: 71 70 73
The trick i used was to set the speed, then reboot until I got the temps I wanted. Then leave it alone.
how bout the HW rate? increasing? i honestly think HW errors increased a lot quicker when it was on stock. the below is for just over 5 days. HW Chain 1 34,533 Chain 2 12,767 Chain 3 64,072
|
|
|
|
glosed
Newbie
Offline
Activity: 21
Merit: 1
|
|
February 08, 2018, 03:41:18 AM |
|
Who else have overclocked their a3 miners / at what and how is it performing?
I ran some tests, posted here: https://bitcointalk.org/index.php?topic=2881452.0. I'm sticking to 681 as I'm taking advantage of cool ambient temps (miner next to an open window) and my HW error rate is a bit lower than it was when I tested. I've been mining in SiaMining, but switched over to Luxor today to give it a shot now that their luck has been improving... I'm going to give it a few days before making the call on switching back. -glosed
|
|
|
|
STATIK
Jr. Member
Offline
Activity: 162
Merit: 2
|
|
February 08, 2018, 04:54:11 AM |
|
I over clocked.
Running 662 GH/S (avg) 917.49
Temps: 71 70 73
The trick i used was to set the speed, then reboot until I got the temps I wanted. Then leave it alone.
How long have you ran it like this so far? I have been running it like that for over 5 days. Once I saw the chain 3 temp at 74. that is as high as it has gone. I over clocked.
Running 662 GH/S (avg) 917.49
Temps: 71 70 73
The trick i used was to set the speed, then reboot until I got the temps I wanted. Then leave it alone.
how bout the HW rate? increasing? i honestly think HW errors increased a lot quicker when it was on stock. the below is for just over 5 days. HW Chain 1 34,533 Chain 2 12,767 Chain 3 64,072 HW errors are nothing to worry about considering Sia difficulty puts that at 0.00007% error rate..I wouldn't worry about it
|
|
|
|
Fonzz
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 08, 2018, 07:14:48 AM |
|
If you read the box below the chart it spells it out pretty clearly: What's going on with the difficulty? At block 135,000 a scheduled hardfork happened. Due to a bug in the new difficulty algorithm, the network difficulty first dropped to a very low number, then started targeting a block time of approximately 30 minutes (instead of the correct 10 minutes). This bug is being fixed by a new hardfork at block 139,000. It will take a few days before block times go back to normal (source). Meanwhile, ASICs have started mining, causing the difficulty to rise further. Exactly... So I was wondering if the miners noticed anything?
|
|
|
|
MickDaster
|
|
February 08, 2018, 12:46:38 PM |
|
apparently miners are not so bad as everyone is saying.
|
|
|
|
Tekno2020
Member
Offline
Activity: 262
Merit: 11
<<<-----( )----->>>
|
|
February 08, 2018, 03:45:39 PM |
|
Hope this isn't too off topic. But has anyone in the USA changed shipment carriers from UPS to Fedex with Bitmain after a miner has already been ordered and paid for?
Does Fedex charge the same $70+ customs brokerage fee per miner like UPS does?
I ask here because I know A3 owners have recently received their miners from BM.
|
~The Annointed One~ btc: 31pDmi6PDdHFUT51MTzJNYacxYMZp2bi58 ltc: MGnitxNo2qZNgb2biahDguxMZuCbGPQQ84
|
|
|
hawkfish007
|
|
February 08, 2018, 03:50:12 PM |
|
Hope this isn't too off topic. But has anyone in the USA changed shipment carriers from UPS to Fedex with Bitmain after a miner has already been ordered and paid for?
Does Fedex charge the same $70+ customs brokerage fee per miner like UPS does?
I ask here because I know A3 owners have recently received their miners from BM.
I ordered 3 batch 1 A3s via all three carriers to three different addresses, only UPS charged a brokerage fee. There were no fee from FedEx or DHL. Out of three UPS had the most expensive shipping fee + $72 brokerage fee.
|
|
|
|
Rody81
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 08, 2018, 04:00:27 PM |
|
Hope this isn't too off topic. But has anyone in the USA changed shipment carriers from UPS to Fedex with Bitmain after a miner has already been ordered and paid for?
Does Fedex charge the same $70+ customs brokerage fee per miner like UPS does?
I ask here because I know A3 owners have recently received their miners from BM.
I ordered 3 batch 1 A3s via all three carriers to three different addresses, only UPS charged a brokerage fee. There were no fee from FedEx or DHL. Out of three UPS had the most expensive shipping fee + $72 brokerage fee. UPS is a piece of shit. Double the shipping cost of Fedex plus you have to pay an extra $72 on top of that and they are the last ones to deliver.
|
|
|
|
Tekno2020
Member
Offline
Activity: 262
Merit: 11
<<<-----( )----->>>
|
|
February 08, 2018, 04:28:43 PM |
|
Hope this isn't too off topic. But has anyone in the USA changed shipment carriers from UPS to Fedex with Bitmain after a miner has already been ordered and paid for?
Does Fedex charge the same $70+ customs brokerage fee per miner like UPS does?
I ask here because I know A3 owners have recently received their miners from BM.
I ordered 3 batch 1 A3s via all three carriers to three different addresses, only UPS charged a brokerage fee. There were no fee from FedEx or DHL. Out of three UPS had the most expensive shipping fee + $72 brokerage fee. Thx for the response Hawkfish. Good to know. Now if I can only get BM to make the change. They are not know for their customer service.
|
~The Annointed One~ btc: 31pDmi6PDdHFUT51MTzJNYacxYMZp2bi58 ltc: MGnitxNo2qZNgb2biahDguxMZuCbGPQQ84
|
|
|
STATIK
Jr. Member
Offline
Activity: 162
Merit: 2
|
|
February 08, 2018, 06:59:27 PM |
|
UPS gets it here for me every time in two days
|
|
|
|
bittawm
Legendary
Offline
Activity: 1894
Merit: 1087
|
|
February 08, 2018, 07:59:24 PM |
|
UPS gets it here for me every time in two days UPS fucks us around in this country too
|
@bittawm is my real telegram @bittawm is my real twitter beware of impersonators
|
|
|
dmch387688
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 08, 2018, 09:17:18 PM |
|
well... I cant cancel....guess next time I'll pay better attention to the dates on the sale add. $2400....it was not even a gamble just plain stupidity....
|
|
|
|
socratex
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 09, 2018, 01:43:08 AM |
|
Saludos, alguien me puede indicar que WALLET utilizar para configuauar mi a3 con SC y que luego pueda cambiar a $$$ a mi cuenta del BANK OF AMERICA
|
|
|
|
MickDaster
|
|
February 09, 2018, 02:21:32 AM |
|
i agree ups is the worst but cant help if there is no other option, 300$ for shipping here
|
|
|
|
STATIK
Jr. Member
Offline
Activity: 162
Merit: 2
|
|
February 09, 2018, 03:31:53 AM |
|
I am maintain a high of 81 or below
|
|
|
|
STATIK
Jr. Member
Offline
Activity: 162
Merit: 2
|
|
February 09, 2018, 06:06:03 AM |
|
Difficulty spiked 600,000th in a day?
|
|
|
|
|