Hi.
I set clock to 700 and volt to 840 mv and it work good .
But FAN PWM set to 0 after 10 min and temp go to 70 .
In original firmware it never set to 0 and temp up to 60
I have an extra cooling system for a miner
Dollemizer
set FAN speed according to: temp_highest=70 temp_top1[PWM_T]=70 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=-29
FAN PWM: 0
read_temp_func Done!
CRC error counter=0
Org firmware
Max pcb temp : 48
set FAN speed according to: temp_highest=48 temp_top1[PWM_T]=48 temp_top1[TEMP_POS_LOCAL]=48 temp_change=1 fix_fan_steps=0
FAN PWM: 30
read_temp_func Done!
CRC error counter=0
Same time in day different org and Dollemizer :/