lancelot6
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 04, 2014, 11:44:28 AM |
|
then it starts over from the beginning.
Any other idea accepted...
You have to activate DHCP or use a static IP. Easiest way is to use dchp. Type "dhcp on" in terminal, set your miner datas in the webinterface and report again please. it has a static ip address. You can see, the log says it connects to the pool, gets the difficulty and the requests for mining.
|
|
|
|
acidfox
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 86
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 05, 2014, 11:42:21 AM |
|
it has a static ip address. You can see, the log says it connects to the pool, gets the difficulty and the requests for mining.
Hi Lancelot, yes i see the miner was connect to any pool but then it was waiting for an ip. Maybe there is a problem with dns or your ip settings. If you want I can have a look at your miner per teamviewer.
|
|
|
|
lancelot6
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 05, 2014, 03:11:11 PM Last edit: January 05, 2014, 04:07:41 PM by lancelot6 |
|
it has a static ip address. You can see, the log says it connects to the pool, gets the difficulty and the requests for mining.
Hi Lancelot, yes i see the miner was connect to any pool but then it was waiting for an ip. Maybe there is a problem with dns or your ip settings. If you want I can have a look at your miner per teamviewer. activated DHCP, same story PHY ID 20005c90 MAC 023d mac: 78-dd-d6-24-02-3d
S-HASH 9 switching to pool 0 initializing bitfury chip init 0 chip init 1 chip init 2 chip init 3 chip init 4 chip init 5 chip init 6 chip init 7 chip init 8 chis-hash > web server on port 80 miner waiting for IP address p init 9 chip init 10 chip init 11 chip init 12 chip init 13 chip init 14 chip init 15 init DHCP DHCP ready 1 Hostname shash023d.local Full duplex 100 Mbps dhcp: sending DHCPDISCOVER dhcp: address 192.168.10.110 mask 255.255.255.0 bcast 0.0.0.0 router 192.168.10.1 nameserver 192.168.10.1 Trying pool 0, server eu-stratum.btcguild.com:3333 as user lancelot6_1:123 Miner 192.168.10.110 connecting to server 54.246.170.18:3333 set difficulty 2 mining notify: job_id '19468' coinbase 234+86 ntime 1388934314 merkle 5 mining notify: job_id '19469' coinbase 234+86 ntime 1388934344 merkle 6 mining notify: job_id '19470' coinbase 234+86 ntime 1388934375 merkle 7 can't close() in state FIN-WAIT-2 mining notify: job_id '19471' coinbase 234+86 ntime 1388934403 merkle 5 PHY ID 20005c90 MAC 023d mac: 78-dd-d6-24-02-3d
S-HASH 9 switching to pool 0 initializing bitfury chip init 0 chip init 1 chip init 2 chip init 3 chip init 4 chip init 5 chip init 6 chip init 7 chip init 8 chis-hash > web server on port 80 miner waiting for IP address p init 9 chip init 10 chip init 11 chip init 12 chip init 13 chip init 14 chip init 15 init DHCP DHCP ready 1 Hostname shash023d.local Full duplex 100 Mbps dhcp: sending DHCPDISCOVER dhcp: address 192.168.10.110 mask 255.255.255.0 bcast 0.0.0.0 router 192.168.10.1 nameserver 192.168.10.1 Trying pool 0, server eu-stratum.btcguild.com:3333 as user lancelot6_1:123 Miner 192.168.10.110 connecting to server 54.246.170.18:3333
I guess we should declare it officially dead. @acidfox, if you have time for a look via teamviwer, I want to thank you in advance for the assistance
|
|
|
|
|
lancelot6
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2014, 10:25:33 PM |
|
@marto74
via teamspeak acidfox and me did a lot of tests with the s-hash 40 ghs, and the result is that it's not working at all. In the past posts you can see all the story. I've also unsoldered the fan and connected it directly in order to undestand if it was draining too many power from the device. I've also discovered that the device is making a strange sound, like a tiny crackling while powered on.
As said, it powers on, it connects to the pool it has a working webgui and a working console, but it's not warming up chips, and it's not mining.
As I've already sent back a nanofury (1 out of 9 to be honest) and I still have no news about it, I would like to know how to deal with this problem asap, since It has been a lot of time since the order and i would like to get rid quickly of this issue (and the other with the nanofury too) and start mining before the end of this year..
thank you
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2014, 10:48:03 PM |
|
Ship it ASAP I do not have spare in stok SO I can send replacement hashing power insted 1 HEX16B or 2 HEX16A2
What do you think?
|
|
|
|
lancelot6
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2014, 11:03:34 PM |
|
Ship it ASAP I do not have spare in stok SO I can send replacement hashing power insted 1 HEX16B or 2 HEX16A2
What do you think?
1 HEX16B will be fine. I have to ask if you can send the device concurrently with this I'm sending back, just to regain a couple of days. I'll send all the related order information about the faulty one via pm or email. Please let me know. thank you again.
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2014, 11:07:55 PM |
|
Ship it ASAP I do not have spare in stok SO I can send replacement hashing power insted 1 HEX16B or 2 HEX16A2
What do you think?
1 HEX16B will be fine. I have to ask if you can send the device concurrently with this I'm sending back, just to regain a couple of days. I'll send all the related order information about the faulty one via pm or email. Please let me know. thank you again. Monday ? Both sendings
|
|
|
|
lancelot6
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 10, 2014, 11:10:55 PM |
|
1 HEX16B will be fine. I have to ask if you can send the device concurrently with this I'm sending back, just to regain a couple of days.
I'll send all the related order information about the faulty one via pm or email.
Please let me know.
thank you again.
Monday ? Both sendings Deal. I'll send the shipping information and previous order information via pm and email too. Thanks
|
|
|
|
Gamer67
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2014, 04:53:15 AM |
|
I am having some issues with only being able to connect my miners to a few servers. For some reason they will not connect to certain servers. Such as multipools, ispace and others.
I can connect to BTCGuild and lukes.
Anyone else ever have issues with not being able to connect ?
I have updated to the latest firmware with no improvement.
Is this the only interface that we can use to control our miners or is there a way to use something else ?
|
"I am not Dorian Nakamoto."
|
|
|
cscape
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2014, 07:20:44 AM |
|
I am having some issues with only being able to connect my miners to a few servers. For some reason they will not connect to certain servers. Such as multipools, ispace and others.
They probably use unsupported stratum commands. If you hook up USB debug cable, the firmware should tell you if it receives something it doesn't understand. Depending on what it is, I may be able to add it. It would have been nice if the most widely used bitcoin mining protocol had a specification...
|
Happy with your c-scape product ? Consider a tip: 16X2FWVRz6UzPWsu4WjKBMJatR7UvyKzcy
|
|
|
Gamer67
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2014, 08:18:52 AM |
|
I am having some issues with only being able to connect my miners to a few servers. For some reason they will not connect to certain servers. Such as multipools, ispace and others.
They probably use unsupported stratum commands. If you hook up USB debug cable, the firmware should tell you if it receives something it doesn't understand. Depending on what it is, I may be able to add it. It would have been nice if the most widely used bitcoin mining protocol had a specification... I have had it hooked up and it just seems to hang right before it attempts to join a pool. No pool info or anything is displayed. It just gets to the part where it displays my local IP,s and does not add the pool IP info. Whereas when I join a pool that I can join it just connects no problem. Another thing I have noticed is that when I tried to join one today it kept adding my user name to the end of the server URL in the web interface after I would hit the set pools button. This is kind of annoying as I really want to mine some alt coins but I cannot join the servers that I would like to.
|
"I am not Dorian Nakamoto."
|
|
|
cscape
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2014, 08:34:14 AM |
|
I have had it hooked up and it just seems to hang right before it attempts to join a pool. No pool info or anything is displayed. It just gets to the part where it displays my local IP,s and does not add the pool IP info. Whereas when I join a pool that I can join it just connects no problem.
Please post/PM the log. Another thing I have noticed is that when I tried to join one today it kept adding my user name to the end of the server URL in the web interface after I would hit the set pools button.
Can you show exactly what's happening ? The firmware does not do anything with the URL, so I have no idea what's going on.
|
Happy with your c-scape product ? Consider a tip: 16X2FWVRz6UzPWsu4WjKBMJatR7UvyKzcy
|
|
|
Gamer67
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2014, 08:51:03 AM |
|
I have had it hooked up and it just seems to hang right before it attempts to join a pool. No pool info or anything is displayed. It just gets to the part where it displays my local IP,s and does not add the pool IP info. Whereas when I join a pool that I can join it just connects no problem.
Please post/PM the log. Another thing I have noticed is that when I tried to join one today it kept adding my user name to the end of the server URL in the web interface after I would hit the set pools button.
Can you show exactly what's happening ? The firmware does not do anything with the URL, so I have no idea what's going on. Sure. Where would I find the log ? Here is a screen shot of the problem with my user name being added to the URL after I submit. http://imgur.com/HJJXCXP
|
"I am not Dorian Nakamoto."
|
|
|
vulgartrendkill
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2014, 08:52:29 AM |
|
Hi Cscape,
Quick question.
I`ve just tried to connect to Eligius (stratum server 3334) and the boards run for a minute or two then reset. Is there any work around?
Thanks
|
|
|
|
Gamer67
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2014, 08:58:08 AM |
|
I assume this is what you mean. PHY ID 20005c90 MAC 023e mac: 78-dd-d6-24-02-3e
S-HASH switching to pool 0 initializing bitfury chip init 0 chip init 1 chip init 2 chip init 3 chip init 4 chip init 5 chip init 6 chip init 7 chip init 8 chip web server on pos-hash > rt 80 init 9 chip init 10 chip init 11 chip init 12 chip init 13 chip init 14 chip init 15 init DHCP DHCP ready 1 init dns Hostname shash023e.local Full duplex 100 Mbps dhcp: sending DHCPDISCOVER dhcp: address 192.168.1.12 mask 255.255.255.0 bcast 0.0.0.0 router 192.168.1.1 nameserver 192.168.1.1
That is as far as it will get.
|
"I am not Dorian Nakamoto."
|
|
|
acidfox
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 86
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 12, 2014, 10:18:20 AM Last edit: January 13, 2014, 10:00:28 PM by acidfox |
|
Hi Cscape, Quick question. I`ve just tried to connect to Eligius (stratum server 3334) and the boards run for a minute or two then reset. Is there any work around? Thanks
https://bitcointalk.org/index.php?topic=293030.msg4116968#msg4116968No there isn't a workaround. Only thing you can do is to set Eligius to first pool and another pool as failover. The miner will switch between the 2 pools some times.
|
|
|
|
lancelot6
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 13, 2014, 08:33:42 PM |
|
@marto74
still waiting for address confirmation (see pm). Can you send me the tracking code for the substituted device you've sent today?
thanks
|
|
|
|
lancelot6
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 16, 2014, 07:31:54 PM |
|
@marto74
still waiting for address confirmation (see pm). Can you send me the tracking code for the substituted device you've sent today?
thanks
hello?
|
|
|
|
wuzamarine
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 264
Merit: 250
derp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 19, 2014, 09:09:07 PM |
|
Has my order been shipped? If so, what is the tracking information? If not, when will it be shipped?
EDEGSUOLY
|
|
|
|
|