presstab
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 12:31:11 AM |
|
I don't think the source code release builds well... well at least I am getting a lot of errors. Using Qt 4.8
I got it to compile, but it wouldn't sync even 1 block. Having this on github would be really great. So changes can be tracked and development by others is easy. Otherwise it becomes very difficult for version control and code review. Are you using the source at the beginning of the thread? I found a tekcoin source on github that had the same syncing issue, but compiled fine. With the source on the thread I get a bunch of warnings about ignoring default elements and potential duplicate alias in tekcoin.qrc when I run qmake. Then when I try to make it I ultimately get an error about QMainWindow... which led me to believe it was a qt4 vs 5 error. I tried using both and still no dice for me. Could just be my setup though because it seems like it is still trying to pull from 5.2.1 even though I have the correct path set...
|
|
|
|
thundertoe (OP)
Legendary
Offline
Activity: 938
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 12:52:16 AM |
|
I don't think the source code release builds well... well at least I am getting a lot of errors. Using Qt 4.8
I got it to compile, but it wouldn't sync even 1 block. Having this on github would be really great. So changes can be tracked and development by others is easy. Otherwise it becomes very difficult for version control and code review. here is the github https://github.com/maxxine/TEK and a zipped chain up to 2/24/14 block 245k+ https://drive.google.com/file/d/0B0M-bp2HC0eYdXlqc0RQWkFFRnc/edit?usp=sharing
|
|
|
|
ofeefee
Legendary
Offline
Activity: 1023
Merit: 1001
Tokenize Fantasy Sports
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 01:02:52 AM |
|
need a working blockchain explorer too
|
|
|
|
presstab
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 01:19:59 AM |
|
Thanks for the github link. The Qwindow error was with the machine I was using, my other machine goes through the compile of this linked code and gets caught up on net.o anyone else getting stuck there?
|
|
|
|
Tranz
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 01:56:18 AM |
|
Thanks for the github link. The Qwindow error was with the machine I was using, my other machine goes through the compile of this linked code and gets caught up on net.o anyone else getting stuck there? Your UPNP deploy may not be correct, you don't really need it. You can use the argument USE_UPNP=- in the compile settings. Under projects/build/detail/additional arguments.
|
|
|
|
SpiryGolden
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 02:02:23 AM |
|
mockup teaser, hopefully more news later today ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi57.tinypic.com%2F25f6f6r.jpg&t=665&c=pXjsQ66i3579BQ) I love the new logo ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) can't wait the facelift of TEK Coin . This coin it's a clear UNDERDOG !
|
|
|
|
ryanb
Legendary
Offline
Activity: 1148
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 02:04:50 AM |
|
i am glad to see Tranz here ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Tranz
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 02:05:09 AM |
|
Same problem on the github src.
I just get this. When I try to sync.
3.43.190:8514, peer=162.243.43.190:8514 Added time data, samples 2, offset -2 (+0 minutes) receive version message: version 60006, blocks=335829, us=65.24.235.56:33149, th em=162.243.43.190:8514, peer=162.243.43.190:8514 trying connection 217.157.9.88:8514 lastseen=472.1hrs trying connection 159.20.131.162:8514 lastseen=360760.3hrs received block 000002f4956b80f69954 ERROR: CheckBlock() : bad block signature ERROR: ProcessBlock() : CheckBlock FAILED Misbehaving: 162.243.43.190:8514 (0 -> 100) DISCONNECTING disconnecting node 162.243.43.190:8514 connection timeout
|
|
|
|
presstab
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 03:08:08 AM Last edit: April 29, 2014, 08:33:25 PM by presstab |
|
Your UPNP deploy may not be correct, you don't really need it. You can use the argument USE_UPNP=- in the compile settings. Under projects/build/detail/additional arguments.
Hmm still not working. Tried on two different machine that both compile HBN using UPNP. But still doesn't work without UPNP. I tried both UPNP=0 and UPNP=- Here is the full error ^ src/net.cpp: In function 'bool BindListenPort(const CService&, std::string&)': src/net.cpp:1730:87: error: invalid conversion from 'void*' to 'const char*' [-f permissive] setsockopt(hListenSocket, IPPROTO_IPV6, IPV6_V6ONLY, (void*)&nOne, size of(int));
^ In file included from src/compat.h:14:0, from src/netbase.h:11, from src/util.h:30, from src/bignum.h:12, from src/main.h:8, from src/db.h:8, from src/net.cpp:7: C:/mingw32/i686-w64-mingw32/include/winsock2.h:999:34: error: initializing arg ument 4 of 'int setsockopt(SOCKET, int, int, const char*, int)' [-fpermissive] WINSOCK_API_LINKAGE int WSAAPI setsockopt(SOCKET s,int level,int optname,cons t char *optval,int optlen); ^ In file included from ../../deps/boost_1_55_0/boost/system/system_error.hpp:14:0 , from ../../deps/boost_1_55_0/boost/thread/exceptions.hpp:22, from ../../deps/boost_1_55_0/boost/thread/win32/thread_primitiv es.hpp:16, from ../../deps/boost_1_55_0/boost/thread/win32/thread_data.hpp :11, from ../../deps/boost_1_55_0/boost/thread/thread_only.hpp:15, from ../../deps/boost_1_55_0/boost/thread/thread.hpp:12, from ../../deps/boost_1_55_0/boost/thread.hpp:13, from src/util.h:21, from src/bignum.h:12, from src/main.h:8, from src/db.h:8, from src/net.cpp:7: ../../deps/boost_1_55_0/boost/system/error_code.hpp: At global scope: ../../deps/boost_1_55_0/boost/system/error_code.hpp:222:36: warning: 'boost::sys tem::posix_category' defined but not used [-Wunused-variable] static const error_category & posix_category = generic_category(); ^ ../../deps/boost_1_55_0/boost/system/error_code.hpp:223:36: warning: 'boost::sys tem::errno_ecat' defined but not used [-Wunused-variable] static const error_category & errno_ecat = generic_category(); ^ ../../deps/boost_1_55_0/boost/system/error_code.hpp:224:36: warning: 'boost::sys tem::native_ecat' defined but not used [-Wunused-variable] static const error_category & native_ecat = system_category(); ^ Makefile.Release:1110: recipe for target 'build/net.o' failed mingw32-make: *** [build/net.o] Error 1 Compared it to net.cpp on HoboNickels The line causing the error on tek is 1730 and is not on the HBN net.h - so I commented it out and it gets passed that part of the build now.
|
|
|
|
presstab
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 03:34:42 AM Last edit: April 29, 2014, 04:00:06 AM by presstab |
|
It compiled and launched now, but now it is stuck syncing with 335931 blocks left. Not sure if this is the same problem you had Tranz?
After manually downloading the chain and replacing it it syncs, but not on its own. Interesting.
|
|
|
|
Tranz
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 04:07:22 AM |
|
It compiled and launched now, but now it is stuck syncing with 335931 blocks left. Not sure if this is the same problem you had Tranz?
After manually downloading the chain and replacing it it syncs, but not on its own. Interesting.
Nice. Yes this implies there was a hard fork, that is not part of the new code.
|
|
|
|
ofeefee
Legendary
Offline
Activity: 1023
Merit: 1001
Tokenize Fantasy Sports
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 06:05:18 AM |
|
i'm getting the following trying to compile on a mac, albeit this is about the 2nd or 3rd time trying to compile QTapps on a mac, no success yet.
clang: warning: argument unused during compilation: '-pthread' Undefined symbols for architecture x86_64: "Db::verify(char const*, char const*, std::ostream*, unsigned int)", referenced from: CDBEnv::Verify(std::string, bool (*)(CDBEnv&, std::string)) in db.o CDBEnv::Salvage(std::string, bool, std::vector<std::pair<std::vector<unsigned char, std::allocator<unsigned char> >, std::vector<unsigned char, std::allocator<unsigned char> > >, std::allocator<std::pair<std::vector<unsigned char, std::allocator<unsigned char> >, std::vector<unsigned char, std::allocator<unsigned char> > > > >&) in db.o "boost::program_options::to_internal(std::string const&)", referenced from: boost::program_options::detail::basic_config_file_iterator<char>::getline(std::string&) in util.o "boost::program_options::detail::common_config_file_iterator::common_config_file_iterator(std::set<std::string, std::less<std::string>, std::allocator<std::string> > const&, bool)", referenced from: boost::program_options::detail::basic_config_file_iterator<char>::basic_config_file_iterator(std::istream&, std::set<std::string, std::less<std::string>, std::allocator<std::string> > const&, bool) in util.o ld: symbol(s) not found for architecture x86_64 clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [tekcoin-Qt.app/Contents/MacOS/tekcoin-Qt] Error 1 00:56:28: The process "/usr/bin/make" exited with code 2. Error while building/deploying project tekcoin-qt (kit: Desktop) When executing step 'Make'
anyone know how to resolve this? just curious
|
|
|
|
|
mighty jol
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 06:30:11 AM |
|
i just wait for front page to be updated with new wallet then stake and go to the exchange TEK is up 30K to......da....... MOON ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) ?
|
|
|
|
ryanb
Legendary
Offline
Activity: 1148
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 10:24:55 AM |
|
i am getting libwinpthread-1.dll is missing and it won't run
|
|
|
|
defaced
Legendary
Offline
Activity: 2198
Merit: 1012
Franko is Freedom
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 12:28:17 PM |
|
Have we pinpointed which code syncs to the correct chain with out having to use the download?
|
|
|
|
presstab
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 02:17:06 PM |
|
i am getting libwinpthread-1.dll is missing and it won't run Thats odd I don't have a libwinpthread
|
|
|
|
|
Tranz
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 10:26:33 PM |
|
Have we pinpointed which code syncs to the correct chain with out having to use the download?
No but I can get the orginal code that allows me to sync from start, although it might stop at another point, I can if them correctly.
|
|
|
|
presstab
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 29, 2014, 10:36:46 PM |
|
Tranz I am browsing through your commits on v1.3 for coin control... damn that must have been a lot of work! I thought it might be easy to add a few of the commits to tek to get coin control going, but the differences in the codes add a lot of debugging time.
|
|
|
|
|