[ANN] Ravencoin [RVN] PoW GPU Mining | Asset Transfer Blockchain (Updated ANN)

[DIXxX]

Still not convinced this is a real bounce back or significant sign of any adoption. More over there are hybrid ASICs in play in the near future and they will tear any number of algos being shuffle or random..mining more ETH ATM or somewhat close in cost comparison...with announced POS/POW switch ETH will go very much up...

[1714845428]

1714845428

[1714845428]

1714845428

[platinum4]

Still not convinced this is a real bounce back or significant sign of any adoption. More over there are hybrid ASICs in play in the near future and they will tear any number of algos being shuffle or random..mining more ETH ATM or somewhat close in cost comparison...with announced POS/POW switch ETH will go very much up...

Best to diversify.

[Hakamoto]

Ravencoin is a global, decentralized network for miners, investors, traders and developers!
a new open source project that everyone can contribute to!

[mceme]

Ravencoin is a global, decentralized network for miners, investors, traders and developers!
a new open source project that everyone can contribute to!

 Wallet without problems and instant Transactions Nice!

[SweetAndLow]

Hello,

I need help from dev maybe ?
Mining rvn with 1 gtx rig for about month. I have ~4200rvn in wallet, but block explorer shows only 1595.76664038

Wallet adress RJznVfBtZcPwkT2i9kBkJtgPrHfKVqn264

What could be wrong here ?

Looks fine to me: https://rvn.hash4.life/address/RJznVfBtZcPwkT2i9kBkJtgPrHfKVqn264

what block explorer are you trying to use, it might not be synced.

[BiteByte]

Hello,

I need help from dev maybe ?
Mining rvn with 1 gtx rig for about month. I have ~4200rvn in wallet, but block explorer shows only 1595.76664038

Wallet adress RJznVfBtZcPwkT2i9kBkJtgPrHfKVqn264

What could be wrong here ?

Looks fine to me: https://rvn.hash4.life/address/RJznVfBtZcPwkT2i9kBkJtgPrHfKVqn264

what block explorer are you trying to use, it might not be synced.

You can check when you are on some of the explorer sites how far behind they are.
If your transactions are relatively new they may not show in the explorers for a while

I.e.

Compare the block number with the block height at the bottom right of the page.
The difference is how far behind the explorer is.
See the two values highlighted below

[platinum4]

All that matters is 'getmininginfo' in the QT

[Marvell2]

Update Raven Mining by GPU Chart (man, Bitcoin Talk makes it hard to post these kind of charts)

Tell me how You achieved such Hasrat on 1050ti!I have only 3.8 m\x http://piccy.info/view3/12302108/96a89e7ddb6e08b19c5ffc43aa26e47d/

ravencalc.xyz X 25% for Enemy 1.08 and OCing. That's because that is what I get with my 1070s and my 1070TI's also from what was passed on to me about 1080TIs too.
Could be high/low for 1050TIs. I don't run any. If you are running them on Enemy 1.08 and have them OC'ed, let me know the MH/s and settings - I'll adjust.

BTW - you need a long period, 12 to 24 hours - if not more, to get an average hash rate

what kinda oc u using to get 5.1 on a1050ti and 8.8 on a 1060 lol those are insane number

[spok]

Hello,

I need help from dev maybe ?
Mining rvn with 1 gtx rig for about month. I have ~4200rvn in wallet, but block explorer shows only 1595.76664038

Wallet adress RJznVfBtZcPwkT2i9kBkJtgPrHfKVqn264

What could be wrong here ?

Looks fine to me: https://rvn.hash4.life/address/RJznVfBtZcPwkT2i9kBkJtgPrHfKVqn264

what block explorer are you trying to use, it might not be synced.

You can check when you are on some of the explorer sites how far behind they are.
If your transactions are relatively new they may not show in the explorers for a while

I.e.

Compare the block number with the block height at the bottom right of the page.
The difference is how far behind the explorer is.
See the two values highlighted below

https://i.imgur.com/Nj1H4Be.png

Omg, thanks. Now it;s updated. But was really far away 1500 coins i hade more than 2 weeks ago (makin ~800RVN/WEEK) so 4200 and 1500 very big difference.

Anyway it shows good ammount now thanks

[metscoin]

QueenBee HIVE Mining Pool



⤧ RAVENCOIN ⤧


Pool: https://hive.gulfcoastmining.com/


US Based
Hourly Payouts
Pool pays all transaction fees
Low Payouts: 0.01 | 0.001 on Sundays
Hosted on Google's best-in-class Cloud

Code:

-a x16r -o stratum+tcp://hive.gulfcoastmining.com:3636 -u WALLETADDRESS -p c=RVN

FOR POOL MINING SUPPORT AND COMMUNITY, JOIN OUR DISCORD

Discord - https://discord.gg/a9XSfbb

[denam]

If you wallet is not synced completely then this is the problem. You can send coins but they will be processed once the block number reaches in your wallet at time of sending. Keep your wallet open and let it syncing it will not take much to be updated fully. This is only understandable problem reading the text you arose your problem with.

[Silent Miner]

Silent Miner v1.1.0

Windows and Linux

Updated kernels
Increases to stability
Increased power efficiency

Windows:
https://mega.nz/#!2K5z1TyD!cmsFagv_lmVyBy_2KO8iQSI9vNoRpZ92etAFjFoz9FQ

Linux:
https://mega.nz/#!CXAXmbDD!jX1GhHdvgM8rqELZGgPZgGzy2CoAJ0tknXtte2wMyoo

[WickedPigeon]

Good stuff on miners from JackIT
https://bitcointalk.org/index.php?topic=3385643.40

Enemy 1.09 v4 beta vs Enemy 1.08 vs SP_Mod Git 1

[infernum666]

Hello,

Would appreciate your help on the following:

I am using 2x RX570 4gb using SGMiner and I always end up getting the following

[20:01:59] Started avermore 1.3.0
[20:01:59] * using Jansson 2.7
[20:02:00] ADL found more devices than opencl!
[20:02:00] There is possibly at least one GPU that doesn't support OpenCL
[20:02:00] Use the gpu map feature to reliably map OpenCL to ADL
[20:02:00] WARNING: Number of OpenCL and ADL devices did not match!
[20:02:00] Hardware monitoring may NOT match up with devices!



0x50324519 (0x0C47AA10 0x0C33B30B 0x00000001 0x0C47AA08), Compile() + 0x17589F bytes(s)
0x50325111 (0x00000E02 0x00000002 0x0001C5E6 0x00397C58), Compile() + 0x176497 bytes(s)
0x501B26B2 (0xFE5BB80C 0x1B1AF002 0x000E0250 0x01C5E600), Compile() + 0x3A38 bytes(s)
0x397C580C (0x1B1AF002 0x000E0250 0x01C5E600 0x397C5800) <unknown module>
0xFE5BB80C (0x000E0250 0x01C5E600 0x397C5800 0x479CC00C) <unknown module>
0x1B1AF002 (0x01C5E600 0x397C5800 0x479CC00C 0x397C580C) <unknown module>
0x000E0250 (0x397C5800 0x479CC00C 0x397C580C 0x479C000C) <unknown module>
0x01C5E600 (0x479CC00C 0x397C580C 0x479C000C 0xFE5BCC0C) <unknown module>
0x397C5800 (0x397C580C 0x479C000C 0xFE5BCC0C 0x1B54E702) <unknown module>
0x479CC00C (0x479C000C 0xFE5BCC0C 0x1B54E702 0x000E0250) <unknown module>
0x397C580C (0xFE5BCC0C 0x1B54E702 0x000E0250 0xFE5CF000) <unknown module>
0x479C000C (0x1B54E702 0x000E0250 0xFE5CF000 0x479CC002) <unknown module>
0xFE5BCC0C (0x000E0250 0xFE5CF000 0x479CC002 0xFE5CD00C) <unknown module>
0x1B54E702 (0xFE5CF000 0x479CC002 0xFE5CD00C 0x4A4C6E02) <unknown module>
0x000E0250 (0x479CC002 0xFE5CD00C 0x4A4C6E02 0x00000050) <unknown module>
0xFE5CF000 (0xFE5CD00C 0x4A4C6E02 0x00000050 0x07540000) <unknown module>
0x479CC002 (0x4A4C6E02 0x00000050 0x07540000 0xFE5CF009) <unknown module>
0xFE5CD00C (0x00000050 0x07540000 0xFE5CF009 0x4A4CCD02) <unknown module>
0x4A4C6E02 (0x07540000 0xFE5CF009 0x4A4CCD02 0xFE5D0C50) <unknown module>

Would appreciate any help.

[GaryH]

Hello,

Would appreciate your help on the following:

I am using 2x RX570 4gb using SGMiner and I always end up getting the following

[20:01:59] Started avermore 1.3.0
[20:01:59] * using Jansson 2.7
[20:02:00] ADL found more devices than opencl!
[20:02:00] There is possibly at least one GPU that doesn't support OpenCL
[20:02:00] Use the gpu map feature to reliably map OpenCL to ADL
[20:02:00] WARNING: Number of OpenCL and ADL devices did not match!
[20:02:00] Hardware monitoring may NOT match up with devices!



0x50324519 (0x0C47AA10 0x0C33B30B 0x00000001 0x0C47AA08), Compile() + 0x17589F bytes(s)
0x50325111 (0x00000E02 0x00000002 0x0001C5E6 0x00397C58), Compile() + 0x176497 bytes(s)
0x501B26B2 (0xFE5BB80C 0x1B1AF002 0x000E0250 0x01C5E600), Compile() + 0x3A38 bytes(s)
0x397C580C (0x1B1AF002 0x000E0250 0x01C5E600 0x397C5800) <unknown module>
0xFE5BB80C (0x000E0250 0x01C5E600 0x397C5800 0x479CC00C) <unknown module>
0x1B1AF002 (0x01C5E600 0x397C5800 0x479CC00C 0x397C580C) <unknown module>
0x000E0250 (0x397C5800 0x479CC00C 0x397C580C 0x479C000C) <unknown module>
0x01C5E600 (0x479CC00C 0x397C580C 0x479C000C 0xFE5BCC0C) <unknown module>
0x397C5800 (0x397C580C 0x479C000C 0xFE5BCC0C 0x1B54E702) <unknown module>
0x479CC00C (0x479C000C 0xFE5BCC0C 0x1B54E702 0x000E0250) <unknown module>
0x397C580C (0xFE5BCC0C 0x1B54E702 0x000E0250 0xFE5CF000) <unknown module>
0x479C000C (0x1B54E702 0x000E0250 0xFE5CF000 0x479CC002) <unknown module>
0xFE5BCC0C (0x000E0250 0xFE5CF000 0x479CC002 0xFE5CD00C) <unknown module>
0x1B54E702 (0xFE5CF000 0x479CC002 0xFE5CD00C 0x4A4C6E02) <unknown module>
0x000E0250 (0x479CC002 0xFE5CD00C 0x4A4C6E02 0x00000050) <unknown module>
0xFE5CF000 (0xFE5CD00C 0x4A4C6E02 0x00000050 0x07540000) <unknown module>
0x479CC002 (0x4A4C6E02 0x00000050 0x07540000 0xFE5CF009) <unknown module>
0xFE5CD00C (0x00000050 0x07540000 0xFE5CF009 0x4A4CCD02) <unknown module>
0x4A4C6E02 (0x07540000 0xFE5CF009 0x4A4CCD02 0xFE5D0C50) <unknown module>

Would appreciate any help.

you'll have to add one of these lines depending on what type of onboard video display you have...add it to your miner line:

--gpu-platform 0

or

--gpu-platform 1

or

--gpu-platform 2

one of those should make it work.  Just add it in your miner config line (same line that has your wallet address).

One of them should work.

[urbancloud]

💎⛏️💎 Urban Clouds 💎⛏️💎
US West Coast Ravencoin Mining Pool
Only 0.5% Fee! No registration needed

Ticker: RVN

Special Sauce:👇

Code:

-a x16r -o stratum+tcp://urban-clouds.com:3636 -u WALLETADDRESS

Hosted on US West Coast OVH Dedicated Server


☁️ Site: https://urban-clouds.com 👈

[lionking2208]

Is it possible to disable 1 gpu so i can play games?

[chem612]

Has anyone else had an issue where rvncoin sent from ravencore client address to a another address and everything shows in the transactions on the sent account but not the received.  I always wait for everything to sync before doing anything and thought maybe it would take sometime.  I sent another transaction with the same addresses and it came over right away.

Any ideas?

[GaryH]

Is it possible to disable 1 gpu so i can play games?

depending on what miner you use, usually there is an option like:

-d 0,1,2     <--this means use GPU 0, 1, and 2.   

Just look for the config options for your miner and it will specify.

[GaryH]

Has anyone else had an issue where rvncoin sent from ravencore client address to a another address and everything shows in the transactions on the sent account but not the received.  I always wait for everything to sync before doing anything and thought maybe it would take sometime.  I sent another transaction with the same addresses and it came over right away.

Any ideas?

I'd look up the transaction on the RVN block explorer and see what it shows...