[ANN] [1080 | 1080TI] ETHlargement - The Hashrate Hardener

[nitrobg]

GTX 1070 and GTX 1070Tİ.

when the software will come out for Ethash...

1070 and 1070 Ti are pretty much maxed out on ethash, there isn't much room for improvement.

[marcusses]

Hi guys..

I somehow managed to pump up my 1080 to 38.3mhs with the pill. Everything works stable, 1392 core locked on 812 mV, +855 memory, 110W from the wall..

After several days of testing, its seems fine, reported speed by nanopool is around 38.1-38.4mhs. But I did the math and there is a catch, the actual number of shares for those 4 days corresponds to 24mhs! I ran through numbers several times, and I have mobo just for the purpose of testing, so there couldn't be any mistake.

So, my question is: should I wait a lil bit more? I only tried this on nanopool so far.. Or this is just fake?

[Painfire]

I'm using this software with GTX1080 and Claymore Dual Miner 11.7. Hashrate raised from 25 to 34 MH. It doesn’t work with Monero miners and with Phoenix miner.

[gsrcrxsi314]

I'm using this software with GTX1080 and Claymore Dual Miner 11.7. Hashrate raised from 25 to 34 MH. It doesn’t work with Monero miners and with Phoenix miner.

It absolutely DOES work with Phoenix. I’m using it on 2 different systems.

[philipma1957]

Te pill works great on my rig with a 1070, 1080 and a 1080 Ti and the latest Nvidia drivers. No reason why the pill would cause instability with mixed cards since it only affects 1080 and the 1080 Ti. If the miner is crashing it's probably from too much overclock.

this   I have 3x 1080ti's

and 1 x 1050ti

the 1080ti's jump to 50-51 each about  151 for the 3
the 1050ti does 10-11  getting 162-165 vs 112

I have been nicely hardened on this rig

kudos to ohgoditisagirl  nice software and clever advertising hook

i use nicehash as the miner and convert to btc  as I am a non believer in eth

[RivAngE]

I'm using this software with GTX1080 and Claymore Dual Miner 11.7. Hashrate raised from 25 to 34 MH. It doesn’t work with Monero miners and with Phoenix miner.

It absolutely DOES work with Phoenix. I’m using it on 2 different systems.

I've also tried ETHpill with XMR Stak and it imporved my hashrate on Monero v7. I mined it for testing purposes and I can't recall the amount of increase, but it was very obvious, like 20%-30%.
Oh but I'm using a 1080ti, you mentioned the 1080.

[mettalmag]

I was looking for this
didn't knew what to do with my Nvidia cards
I will test it out and edit the post
cheers


Getting 36 MH/s on a 1080FTW +0/+850 @ 60% TDP

[vuquanict]

am I the only one using ethminer? its capable of 54Mh if your overclock is, what is the benefit of phoenix/claymore? don't they have dev fees? why pay that if you don't have to

I use ethminer.  Getting 41 MH/s on a 1080 +0/+850 @ 60% TDP.

Also 1080s here, but not quite to 41.  Stuck at 35.

I'm only getting 38MH/s with +1000 on memory. How the **** does he get 41mhs?

[B00gieman]

I'm using this software with GTX1080 and Claymore Dual Miner 11.7. Hashrate raised from 25 to 34 MH. It doesn’t work with Monero miners and with Phoenix miner.

Yes it does.
Im working with Phoniex since day 1.

[dragonmike]

What kind of speed increase do you get on CNv1 with the pill on pascal GPUs?

[mettalmag]

am I the only one using ethminer? its capable of 54Mh if your overclock is, what is the benefit of phoenix/claymore? don't they have dev fees? why pay that if you don't have to

I use ethminer.  Getting 41 MH/s on a 1080 +0/+850 @ 60% TDP.

Also 1080s here, but not quite to 41.  Stuck at 35.

I'm only getting 38MH/s with +1000 on memory. How the **** does he get 41mhs?

same question here
but I don't think it is possible with 1080

[Mind163]

Palit 1080t super jeatstream PL70, CC +120 Mem +1000 = 57.04Mh

[heavyarms1912]

am I the only one using ethminer? its capable of 54Mh if your overclock is, what is the benefit of phoenix/claymore? don't they have dev fees? why pay that if you don't have to

I use ethminer.  Getting 41 MH/s on a 1080 +0/+850 @ 60% TDP.

Also 1080s here, but not quite to 41.  Stuck at 35.

I'm only getting 38MH/s with +1000 on memory. How the **** does he get 41mhs?

same question here
but I don't think it is possible with 1080

here's with +750 on memory.  It does more than 41.xx on other miners but I prefer ethminer.
That's a 1080 (+750), 1070 Ti (+600), 1070(+400) and 1060 6gb (+600) in that order.

[vuquanict]

am I the only one using ethminer? its capable of 54Mh if your overclock is, what is the benefit of phoenix/claymore? don't they have dev fees? why pay that if you don't have to

I use ethminer.  Getting 41 MH/s on a 1080 +0/+850 @ 60% TDP.

Also 1080s here, but not quite to 41.  Stuck at 35.

I'm only getting 38MH/s with +1000 on memory. How the **** does he get 41mhs?

same question here
but I don't think it is possible with 1080

here's with +750 on memory.  It does more than 41.xx on other miners but I prefer ethminer.
That's a 1080 (+750), 1070 Ti (+600), 1070(+400) and 1060 6gb (+600) in that order.
https://i.imgur.com/l8L4lMf.png

Can you post a full command line for ethminer??

[VirosaGITS]

am I the only one using ethminer? its capable of 54Mh if your overclock is, what is the benefit of phoenix/claymore? don't they have dev fees? why pay that if you don't have to

I use ethminer.  Getting 41 MH/s on a 1080 +0/+850 @ 60% TDP.

Also 1080s here, but not quite to 41.  Stuck at 35.

I'm only getting 38MH/s with +1000 on memory. How the **** does he get 41mhs?

same question here
but I don't think it is possible with 1080

It just need to clock the memory higher and remain stable doing so. For example my FE 1080 do 38.5 mh/s at +1000 mem, it's at 5510 mem. I think it would be stable higher, but it's artificially limited. It would technically be possible to fix this in the bios and make it more stable, but GTX is a bitch to flash back to.

Meanwhile my EVGA 1080 ACX barely clock 5000 if lucky, and not very stable. I get 31-36 mhs on them. Those are probably rev A.

[Chugumoto]

It just need to clock the memory higher and remain stable doing so. For example my FE 1080 do 38.5 mh/s at +1000 mem, it's at 5510 mem.

for 1080 standard memclock is 5000, so +1000 = 6000. not 5500
you just need to switch card from P2 to P0 with nvidiaProfileInspector for example

[heavyarms1912]

Can you post a full command line for ethminer??

I don't have any custom config in the commandline except --cuda-block-size 128 (which again is default iirc)

In section 5 of nvidia profile inspector
cuda force p2 state : off
power management mode : prefer max performance.


tried at +1000 mem does ~42.5 on phoenix and ~41.7 on ethminer
https://imgur.com/a/omD0M8z

[papabiz]

new to ETH mining, but im getting ~20mh/s with 1080ti.

the pill does not seem to do anything for my rig, PL 65, core +70, mem +995 = 20.3 mhs both with or without the pill, the cards are in P0 mode.

the rig is a 9x 1080ti build, is it because its CPU hungry? using ethminer windows x64


edit; fixed by changing miner

[lulucorn]

Been using this for over a month, just didn't have time to post my result.  
 
No crash and working as intended.

Tried it on Claymore and Phoenix and no problem

My 1080 Ti does 56mh/s and 1080 does 42mh/s. Got really lucky with the 1080 as it can OC +1000 stable  

https://i.imgur.com/Hapg3Xh.png 
Recent 23 hours of hashing log (had to turn off the pc to clean some stuff out), 0 stales/invalid shares

[BogdanCo]

Been using this for over a month, just didn't have time to post my result.  
 
No crash and working as intended.

Tried it on Claymore and Phoenix and no problem

My 1080 Ti does 56mh/s and 1080 does 42mh/s. Got really lucky with the 1080 as it can OC +1000 stable  

https://i.imgur.com/Hapg3Xh.png 
Recent 23 hours of hashing log (had to turn off the pc to clean some stuff out), 0 stales/invalid shares

What model of 1080 and 1080ti do you have? Thanks!