glen123
Legendary
Offline
Activity: 1028
Merit: 1000
|
|
March 16, 2014, 10:25:13 AM |
|
Hi !
I ordered the 130 Version Order Reference QSUFGPQFI -- placed on 2014-03-06
at this Point the Homepage shows 499 Euro with Shipment March
Today i checked the Status and the Homepage shows 130er Miner at 409 Euro and Shipment April 7th
Mhhmm ok lost 90 Euros cause Early Adapor ;-) But when will it Shipped ?
@Marto : can u do me a favour and add a TP Link 3020 Router to my Order ?
Greetz Glen
|
|
|
|
Gator-hex
|
|
March 16, 2014, 05:44:52 PM |
|
Hi !
I ordered the 130 Version Order Reference QSUFGPQFI -- placed on 2014-03-06
at this Point the Homepage shows 499 Euro with Shipment March
Today i checked the Status and the Homepage shows 130er Miner at 409 Euro and Shipment April 7th
Mhhmm ok lost 90 Euros cause Early Adapor ;-) But when will it Shipped ?
@Marto : can u do me a favour and add a TP Link 3020 Router to my Order ?
Greetz Glen
Answering all e-mails and PM about 130 GHs units The shipping of 130 GHs units will start mid march. All end of feb 260 ghs units already shipped out
From experience Technobit are not good at adding stuff to orders. I'd recommend ordering a TP-Link off eBay and doing the firmware upgrade yourself.
|
|
|
|
Lucko
|
|
March 16, 2014, 08:31:11 PM |
|
Finally found sweet spot Already run rock solid for almost 4 days. Do you have a preproduction board or just bad luck? All 11 boards that I have are rock solid with defaults... I even drooped the voltage a bit and still rock solid... 260/985
|
|
|
|
QuiveringGibbage
|
|
March 16, 2014, 09:49:45 PM |
|
Sometimes DOA can just mean the USB leaks power and your power protected USB hub wont let your PC talk to it.
no usb hub used. I have a dedicated PC (mATX MB) as the control box running cgminer. All 5 unit were plugged directly into the MB and tested individually. I even went to the trouble of trying the two DOA units with another PSU and Laptop. Actually, maybe DOA is not the right term. sorry, I can detect the units in cgminer but nothing seems to get it to hash. Tried all the settings described by 2Good's review. Anyhow the unit are already on their way back to Bulgaria. I did ask TechnoBit for additional support but was directed to submit RMA. They responded promptly Cheers, QG Thanks QG
|
Bitcoin is at the tippity top of the mountain...but it's really only half way up..
|
|
|
TylerRice
Member
Offline
Activity: 115
Merit: 10
|
|
March 17, 2014, 02:14:22 AM |
|
Hey marto74,
How are you going for shipment tomorrow/this week? Are you going to be getting units out on time. You was only 1 month late with my Hex16 board so not too bad, But yeah jsut wanted to see if we had a target time for my order (Ref: HTHYKSJQD)
Thanks mate
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
March 17, 2014, 03:41:35 AM |
|
Finally found sweet spot Already run rock solid for almost 4 days. Do you have a preproduction board or just bad luck? All 11 boards that I have are rock solid with defaults... I even drooped the voltage a bit and still rock solid... 260/985 Yes, preproduction board and the weather make thing worse.
|
|
|
|
marto74 (OP)
|
|
March 17, 2014, 06:49:17 AM |
|
Hey marto74,
How are you going for shipment tomorrow/this week? Are you going to be getting units out on time. You was only 1 month late with my Hex16 board so not too bad, But yeah jsut wanted to see if we had a target time for my order (Ref: HTHYKSJQD)
Thanks mate
All 17 march orders will be out today
|
|
|
|
TrytoHex
Member
Offline
Activity: 86
Merit: 10
|
|
March 17, 2014, 11:01:15 AM |
|
Hi marto74, is mine in the batch leaving today or in the next one? Reference: UQZPUHIZQ
|
|
|
|
tm0w
Newbie
Offline
Activity: 6
Merit: 0
|
|
March 17, 2014, 12:27:06 PM |
|
Order has just been updated: 2014-03-17 10:53:58 Shipped Thanks @Marto74
|
|
|
|
shortpocket
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 17, 2014, 03:14:40 PM |
|
Hey marto74,
How are you going for shipment tomorrow/this week? Are you going to be getting units out on time. You was only 1 month late with my Hex16 board so not too bad, But yeah jsut wanted to see if we had a target time for my order (Ref: HTHYKSJQD)
Thanks mate
All 17 march orders will be out today My order status just says payment accepted... ORDER REFERENCE DATE TOTAL PRICE PAYMENT: STATUS INVOICE GJCXLHFTY 2014-02-28 531,00€ PD PayPal + Extra Fee Payment accepted PDF details
|
|
|
|
marto74 (OP)
|
|
March 17, 2014, 03:33:19 PM |
|
Hey marto74,
How are you going for shipment tomorrow/this week? Are you going to be getting units out on time. You was only 1 month late with my Hex16 board so not too bad, But yeah jsut wanted to see if we had a target time for my order (Ref: HTHYKSJQD)
Thanks mate
All 17 march orders will be out today My order status just says payment accepted... ORDER REFERENCE DATE TOTAL PRICE PAYMENT: STATUS INVOICE GJCXLHFTY 2014-02-28 531,00€ PD PayPal + Extra Fee Payment accepted PDF details Your order is 130 Ghs and the shipment is March 130 Gh/s units are in production now
|
|
|
|
QuiveringGibbage
|
|
March 22, 2014, 02:08:16 AM |
|
If anyone happens to need to go through the RMA process, you should note that; You should declare your package to be less than 15 EUR in order to skip customs clearance. Having h/w sitting in Bulgaria customs for an extra 2-3 days is ... costly on time.
Cheers, QG PS, Marto74, should consider letting your customers know before they ship items back.
|
Bitcoin is at the tippity top of the mountain...but it's really only half way up..
|
|
|
glen123
Legendary
Offline
Activity: 1028
Merit: 1000
|
|
March 22, 2014, 09:10:58 PM |
|
Your order is 130 Ghs and the shipment is March 130 Gh/s units are in production now
[/quote]
Hi !
one Question : When will the March 130er Units Shipped ? , cause today its the 22the of March and nearly April.
The Page shows : 409 Euro and Shipment 7th of April. Means for me as Early Adaptor paid 90 Bucks more for 1-2 Week earlier Deliver ?
Greetz Glen
|
|
|
|
marto74 (OP)
|
|
March 22, 2014, 09:13:41 PM |
|
shipping of 130 begins in monday
|
|
|
|
glen123
Legendary
Offline
Activity: 1028
Merit: 1000
|
|
March 22, 2014, 09:24:10 PM |
|
Perfektly ;-)
Thank You
Greetz Glen
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
March 23, 2014, 02:10:13 AM Last edit: March 24, 2014, 10:44:51 AM by Zich |
|
For Rpi 1. sudo aptitude update 2. sudo aptitude upgrade 3. sudo aptitude install libudev-dev libusb-1.0-0-dev libfox-1.6-dev 4. sudo aptitude install autotools-dev autoconf automake 5. sudo aptitude install libtool libncurses-dev yasm 6. sudo aptitude install curl libcurl4-openssl-dev libjansson-dev screen 7. sudo aptitude install pkg-config uthash-dev make git-core
For Ubuntu 1. sudo apt-get update 2. sudo apt-get upgrade 3. sudo apt-get install libudev-dev libusb-1.0-0-dev libfox-1.6-dev 4. sudo apt-get install autotools-dev autoconf automake 5. sudo apt-get install libtool libncurses-dev yasm 6. sudo apt-get install curl libcurl4-openssl-dev libjansson-dev screen 7. sudo apt-get install pkg-config uthash-dev make git-core
Download cgminer 4.0.0 1. git clone https://github.com/ckolivas/cgminer.git 2. mv cgminer cgminer-4.0.0 3. cd cgminer-4.0.0 4. git checkout 2786526d9f1acb7bd903ece3c822c2c9203aa0b7 5. wget https://www.dropbox.com/s/tyerzzpc1xjqegj/2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch 6. patch -p1 < 2786526d9f1acb7bd903ece3c822c2c9203aa0b7.patch 7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8 8. make
Step 5 is patch uploaded to dropbox by myself, so you can use your own that downloaded from technobit download page if you want Make sure there is no error message on each step. No need to install, you can run cgminer from folder. 1. screen 2. sudo ./cgminer --hexminera-voltage 1460 --hexminera-options 16:480 --hexminerc-voltage 1100 --hexminerc-options 16:1500 --hexminerb-voltage 900 --hexminerb-options 16:540 --hexminer8-set-diff-to-one 0 --hexminer8-chip-mask 255 --hexminer8-voltage 1000 --hexminer8-options 8:260 --set_default_to_8 --hexmineru-frequency 54
Or add the setting to cgminer.conf so you don't have to type setting command each time For Rpi sudo nano /root/.cgminer/cgminer.conf
For Ubuntu sudo nano /home/"user"/.cgminer/cgminer.conf
{ "pools" : [ { "url" : "stratum+tcp://stratum-lb-usa48.btcguild.com:3333", "user" : "user", "pass" : "123" } ] , "api-listen" : true, "api-allow" : "R:127.0.0.1", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "120", "hotplug" : "5", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "60", "shares" : "0", "hexminera-voltage" : "1460", "hexminera-options" : "16:480", "hexminerc-voltage" : "1100", "hexminerc-options" : "16:1500", "hexminerb-voltage" : "900", "hexminerb-options" : "16:540", "hexminer8-set-diff-to-one" : "0", "hexminer8-chip-mask" : "255", "hexminer8-voltage" : "1005", "hexminer8-options" : "8:260", "hexmineru-frequency" : "54", "set_default_to_8" : true, "kernel-path" : "/usr/local/bin" }
To compile cgminer-api, go to cgminer folder then sudo gcc api-example.c -Icompat/jansson-2.5 -Icompat/libusb-1.0/libusb -o cgminer-api
To run cgminer-api, go to cgminer folder or copy cgminer-api to /usr/bin
|
|
|
|
iFA88
|
|
March 23, 2014, 03:00:52 PM |
|
Great howto Zich! Have you any idea why freezing the whole RPI out with cgminer 4.0.0 in 1 min? With the older version 3.12.3 works fine.
And the other thing: root@rpi:~/cgminer# gcc api-example.c -Icompat/jansson-2.5 -Icompat/libusb-1.0/libusb -o cgminer-api api-example.c:14:20: fatal error: config.h: No such file or directory compilation terminated.
|
|
|
|
ZBC3
|
|
March 23, 2014, 03:51:15 PM |
|
When you return an item to Technobit you should set the value to 0.00.
Technically it's not a new transaction, and has no value since it's already been paid for.
|
|
|
|
TrytoHex
Member
Offline
Activity: 86
Merit: 10
|
|
March 23, 2014, 04:24:55 PM |
|
shipping of 130 begins in monday
Nice marto, even starting to ship before the set deadline. An exemple to many other ASIC manufacturers. Can't wait to add these to my farm.
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
March 24, 2014, 02:06:52 AM |
|
Great howto Zich! Have you any idea why freezing the whole RPI out with cgminer 4.0.0 in 1 min? With the older version 3.12.3 works fine.
And the other thing: root@rpi:~/cgminer# gcc api-example.c -Icompat/jansson-2.5 -Icompat/libusb-1.0/libusb -o cgminer-api api-example.c:14:20: fatal error: config.h: No such file or directory compilation terminated.
No idea about that, it's work just fine on my Rpi. About api compile, did you run it on right directory? if yes you should be able to see compile instruction on api-example.c
|
|
|
|
|