|
lumberinvestments
|
 |
February 28, 2014, 01:50:25 AM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000  As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time). |
|
|
|
|
lenovothinkpad
Full Member
 Offline
Activity: 143
Merit: 100
quickpay
|
|
February 28, 2014, 05:35:39 AM |
|
i7=150khs 955=100Khs use the CPU mine These are only rough mining specs. when you look here ↗Welcome to the QQC community  |
AE the RealWay
BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV
LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
|
lumberinvestments
|
|
February 28, 2014, 08:19:57 AM |
|
i7=150khs 955=100Khs use the CPU mine These are only rough mining specs. when you look here ↗Welcome to the QQC community I think you are wrong. More like 10-15 kh/sec for that CPU as of now, not 150 kh/sec |
|
|
|
|
lenovothinkpad
Full Member
Offline
Activity: 143
Merit: 100
quickpay
|
|
February 28, 2014, 10:43:00 AM |
|
i7=150khs 955=100Khs use the CPU mine These are only rough mining specs. when you look here ↗Welcome to the QQC community I think you are wrong. More like 10-15 kh/sec for that CPU as of now, not 150 kh/sec 10-15 ? my cpu is AMD 955 so I went to give it a try |
AE the RealWay
BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV
LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
|
Nicho
|
|
February 28, 2014, 02:36:03 PM |
|
Does this coin have any active developers, community or founding?
|
|
|
|
|
|
lumberinvestments
|
|
February 28, 2014, 02:47:22 PM |
|
Community is in China.
Heard pumping is coming soon, everybody should buy this coin as it is still so much undervalued, take a look at what happened to VTC.
|
|
|
|
|
infofront
Legendary
Offline
Activity: 2646
Merit: 2793
Shitcoin Minimalist
|
|
February 28, 2014, 03:05:50 PM |
|
I just tried buying more on coinedup and it says trading has been temporarily halted on this market.  |
|
|
|
|
cryptohunter
Legendary
Offline
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
|
|
February 28, 2014, 03:06:40 PM |
|
I just tried buying more on coinedup and it says trading has been temporarily halted on this market. same, we need another exchange, get voting on mintpal everyone.... you can vote 3x per hour and don't even need to be registered there. Tell your friends to also. |
|
|
|
lenovothinkpad
Full Member
Offline
Activity: 143
Merit: 100
quickpay
|
|
February 28, 2014, 04:33:39 PM |
|
community also can join the development ,as coding as you can |
AE the RealWay
BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV
LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
lenovothinkpad
Full Member
Offline
Activity: 143
Merit: 100
quickpay
|
|
March 01, 2014, 08:34:12 AM |
|
news: allcrypt exChange https://www.allcrypt.com accept QQC/BTC QQC/LTC QQC/DOGE A new web site ,about this exchange We are still in the query details. |
AE the RealWay
BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV
LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
|
trid
|
|
March 01, 2014, 10:12:29 AM |
|
I just tried buying more on coinedup and it says trading has been temporarily halted on this market. same, we need another exchange, get voting on mintpal everyone.... you can vote 3x per hour and don't even need to be registered there. Tell your friends to also. qqc on https://www.allcoin.com/trade/qqc_btc too |
|
|
|
|
|
lumberinvestments
|
|
March 01, 2014, 01:44:40 PM |
|
Can you just stop dumping .. whoever mines big amount ??
This coin needs to go high. If you never stop dumping you will never see it high !
|
|
|
|
|
Dopehaze
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 01, 2014, 03:29:15 PM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time). You don't need much system RAM on Linux, 256-512MB should be enough if you are running some lite distribution such as Lubuntu. Windows drivers have a bug, it queries amount of system RAM instead of VRAM. Below are my settings for 280X, about 135khs per card. "intensity" : "12,12,12,12",
"vectors" : "1,1,1,1",
"worksize" : "256,256,256,256",
"kernel" : "scrypt-jane,scrypt-jane,scrypt-jane,scrypt-jane",
"lookup-gap" : "0,0,0,0",
"thread-concurrency" : "16384,16384,16384,16384",
"shaders" : "0,0,0,0",
"gpu-engine" : "0-1050,0-1050,0-1050,0-1050",
"gpu-fan" : "0-85,0-85,0-85,0-85",
"gpu-memclock" : "0,0,0,0",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "0,0,0,0",
"gpu-vddc" : "0.000,0.000,0.000,0.000",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",
"gpu-reorder" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-reorder" : true,
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
|
|
|
|
|
|
lumberinvestments
|
|
March 01, 2014, 04:53:33 PM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time). You don't need much system RAM on Linux, 256-512MB should be enough if you are running some lite distribution such as Lubuntu. Windows drivers have a bug, it queries amount of system RAM instead of VRAM. Below are my settings for 280X, about 135khs per card. "intensity" : "12,12,12,12",
"vectors" : "1,1,1,1",
"worksize" : "256,256,256,256",
"kernel" : "scrypt-jane,scrypt-jane,scrypt-jane,scrypt-jane",
"lookup-gap" : "0,0,0,0",
"thread-concurrency" : "16384,16384,16384,16384",
"shaders" : "0,0,0,0",
"gpu-engine" : "0-1050,0-1050,0-1050,0-1050",
"gpu-fan" : "0-85,0-85,0-85,0-85",
"gpu-memclock" : "0,0,0,0",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "0,0,0,0",
"gpu-vddc" : "0.000,0.000,0.000,0.000",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",
"gpu-reorder" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-reorder" : true,
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
Are you getting no hardware errors with that ? |
|
|
|
|
cryptohunter
Legendary
Offline
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
|
|
March 01, 2014, 05:08:29 PM |
|
i don't think people realise how rare 30M minting is. The price for this coin is below value for a no premine coin which is this fast. I have liked it from the start. If a billion new coins a day were not coming out qqc will do way better.
|
|
|
|
Dopehaze
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 01, 2014, 05:37:17 PM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time). You don't need much system RAM on Linux, 256-512MB should be enough if you are running some lite distribution such as Lubuntu. Windows drivers have a bug, it queries amount of system RAM instead of VRAM. Below are my settings for 280X, about 135khs per card. "intensity" : "12,12,12,12",
"vectors" : "1,1,1,1",
"worksize" : "256,256,256,256",
"kernel" : "scrypt-jane,scrypt-jane,scrypt-jane,scrypt-jane",
"lookup-gap" : "0,0,0,0",
"thread-concurrency" : "16384,16384,16384,16384",
"shaders" : "0,0,0,0",
"gpu-engine" : "0-1050,0-1050,0-1050,0-1050",
"gpu-fan" : "0-85,0-85,0-85,0-85",
"gpu-memclock" : "0,0,0,0",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "0,0,0,0",
"gpu-vddc" : "0.000,0.000,0.000,0.000",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",
"gpu-reorder" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-reorder" : true,
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
Are you getting no hardware errors with that ? No HW errors on 4 Gigabyte and 4 Powercolor cards. |
|
|
|
|
|
KickAzzDude
|
|
March 01, 2014, 06:37:59 PM |
|
Need to get it on a bigger exchange, the current market cap for this coin is insanely low. We need to promote it more, how's the Chinese support coming? This is a great coin with N-Factor way before it started getting popular which means no multipool has mined and dumped it
|
|
|
|
|
|
|
ashao1015
|
|
March 02, 2014, 09:41:32 AM |
|
Voted for QQC.
We need a better exchange, the value of QQCoin will increase!
|
|
|
|
|
haggis
|
|
March 02, 2014, 10:10:01 AM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time). You don't need much system RAM on Linux, 256-512MB should be enough if you are running some lite distribution such as Lubuntu. Windows drivers have a bug, it queries amount of system RAM instead of VRAM. Below are my settings for 280X, about 135khs per card. "intensity" : "12,12,12,12",
"vectors" : "1,1,1,1",
"worksize" : "256,256,256,256",
"kernel" : "scrypt-jane,scrypt-jane,scrypt-jane,scrypt-jane",
"lookup-gap" : "0,0,0,0",
"thread-concurrency" : "16384,16384,16384,16384",
"shaders" : "0,0,0,0",
"gpu-engine" : "0-1050,0-1050,0-1050,0-1050",
"gpu-fan" : "0-85,0-85,0-85,0-85",
"gpu-memclock" : "0,0,0,0",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "0,0,0,0",
"gpu-vddc" : "0.000,0.000,0.000,0.000",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",
"gpu-reorder" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-reorder" : true,
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
Are you getting no hardware errors with that ? No HW errors on 4 Gigabyte and 4 Powercolor cards. Great, which miner are you using? |
|
|
|
|
|
