haggis
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 01:46:36 AM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane
|
|
|
|
lumberinvestments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 01:50:25 AM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time).
|
|
|
|
lenovothinkpad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 143
Merit: 100
quickpay
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 05:35:39 AM |
|
i7=150khs 955=100Khs use the CPU mine These are only rough mining specs. when you look here ↗Welcome to the QQC community ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
AE the RealWay BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
lumberinvestments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:19:57 AM |
|
i7=150khs 955=100Khs use the CPU mine These are only rough mining specs. when you look here ↗Welcome to the QQC community ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I think you are wrong. More like 10-15 kh/sec for that CPU as of now, not 150 kh/sec
|
|
|
|
lenovothinkpad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 143
Merit: 100
quickpay
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 10:43:00 AM |
|
i7=150khs 955=100Khs use the CPU mine These are only rough mining specs. when you look here ↗Welcome to the QQC community ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I think you are wrong. More like 10-15 kh/sec for that CPU as of now, not 150 kh/sec 10-15 ? my cpu is AMD 955 so I went to give it a try
|
AE the RealWay BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
Nicho
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 02:36:03 PM |
|
Does this coin have any active developers, community or founding?
|
|
|
|
lumberinvestments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 02:47:22 PM |
|
Community is in China. Heard pumping is coming soon, everybody should buy this coin as it is still so much undervalued, take a look at what happened to VTC.
|
|
|
|
infofront
Legendary
Offline
Activity: 2632
Merit: 2790
Shitcoin Minimalist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 03:05:50 PM |
|
I just tried buying more on coinedup and it says trading has been temporarily halted on this market. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
|
cryptohunter
Legendary
Offline
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 03:06:40 PM |
|
I just tried buying more on coinedup and it says trading has been temporarily halted on this market. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) same, we need another exchange, get voting on mintpal everyone.... you can vote 3x per hour and don't even need to be registered there. Tell your friends to also.
|
|
|
|
lenovothinkpad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 143
Merit: 100
quickpay
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 04:33:39 PM |
|
community also can join the development ,as coding as you can ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
AE the RealWay BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
lenovothinkpad
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 143
Merit: 100
quickpay
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2014, 08:34:12 AM |
|
news: allcrypt exChange https://www.allcrypt.com accept QQC/BTC QQC/LTC QQC/DOGE A new web site ,about this exchange We are still in the query details.
|
AE the RealWay BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
trid
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2014, 10:12:29 AM |
|
I just tried buying more on coinedup and it says trading has been temporarily halted on this market. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) same, we need another exchange, get voting on mintpal everyone.... you can vote 3x per hour and don't even need to be registered there. Tell your friends to also. qqc on https://www.allcoin.com/trade/qqc_btc too
|
|
|
|
lumberinvestments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2014, 01:44:40 PM |
|
Can you just stop dumping .. whoever mines big amount ?? This coin needs to go high. If you never stop dumping you will never see it high !
|
|
|
|
Dopehaze
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2014, 03:29:15 PM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time). You don't need much system RAM on Linux, 256-512MB should be enough if you are running some lite distribution such as Lubuntu. Windows drivers have a bug, it queries amount of system RAM instead of VRAM. Below are my settings for 280X, about 135khs per card. "intensity" : "12,12,12,12", "vectors" : "1,1,1,1", "worksize" : "256,256,256,256", "kernel" : "scrypt-jane,scrypt-jane,scrypt-jane,scrypt-jane", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "16384,16384,16384,16384", "shaders" : "0,0,0,0", "gpu-engine" : "0-1050,0-1050,0-1050,0-1050", "gpu-fan" : "0-85,0-85,0-85,0-85", "gpu-memclock" : "0,0,0,0", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "85,85,85,85", "temp-target" : "75,75,75,75", "gpu-reorder" : true, "api-mcast-port" : "4028", "api-port" : "4028", "auto-fan" : true, "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "gpu-reorder" : true, "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "60", "scrypt" : true, "scrypt-jane" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin"
|
|
|
|
lumberinvestments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2014, 04:53:33 PM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time). You don't need much system RAM on Linux, 256-512MB should be enough if you are running some lite distribution such as Lubuntu. Windows drivers have a bug, it queries amount of system RAM instead of VRAM. Below are my settings for 280X, about 135khs per card. "intensity" : "12,12,12,12", "vectors" : "1,1,1,1", "worksize" : "256,256,256,256", "kernel" : "scrypt-jane,scrypt-jane,scrypt-jane,scrypt-jane", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "16384,16384,16384,16384", "shaders" : "0,0,0,0", "gpu-engine" : "0-1050,0-1050,0-1050,0-1050", "gpu-fan" : "0-85,0-85,0-85,0-85", "gpu-memclock" : "0,0,0,0", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "85,85,85,85", "temp-target" : "75,75,75,75", "gpu-reorder" : true, "api-mcast-port" : "4028", "api-port" : "4028", "auto-fan" : true, "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "gpu-reorder" : true, "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "60", "scrypt" : true, "scrypt-jane" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin"
Are you getting no hardware errors with that ?
|
|
|
|
cryptohunter
Legendary
Offline
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2014, 05:08:29 PM |
|
i don't think people realise how rare 30M minting is. The price for this coin is below value for a no premine coin which is this fast. I have liked it from the start. If a billion new coins a day were not coming out qqc will do way better.
|
|
|
|
Dopehaze
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2014, 05:37:17 PM |
|
Thank you! But it seems not helpful for my case. I tried all low/mid/high combinations of TC between 8192 and 32768 with lookup-gap between 2 and 8 while rawintensity was < 1000 ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) As I use BAMT which is 32 Bit only 2GB of 8GB are available. When I find some spare time I'll setup a 64Bit system and see if that works better for scrypt-jane Just throw in a 64 bit system.. 2 GB are never enough for scrypt-jane at higher N. You can try though TC of 4096 or 2048 to see which one is working. Raw intensity 1024/2048/4096 at lg 3 or higher. Then you just increase the TC until it will not start anymore. Then you go higher with R in increments of w (if w is 128 just add 128 each time). You don't need much system RAM on Linux, 256-512MB should be enough if you are running some lite distribution such as Lubuntu. Windows drivers have a bug, it queries amount of system RAM instead of VRAM. Below are my settings for 280X, about 135khs per card. "intensity" : "12,12,12,12", "vectors" : "1,1,1,1", "worksize" : "256,256,256,256", "kernel" : "scrypt-jane,scrypt-jane,scrypt-jane,scrypt-jane", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "16384,16384,16384,16384", "shaders" : "0,0,0,0", "gpu-engine" : "0-1050,0-1050,0-1050,0-1050", "gpu-fan" : "0-85,0-85,0-85,0-85", "gpu-memclock" : "0,0,0,0", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "85,85,85,85", "temp-target" : "75,75,75,75", "gpu-reorder" : true, "api-mcast-port" : "4028", "api-port" : "4028", "auto-fan" : true, "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "gpu-reorder" : true, "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "60", "scrypt" : true, "scrypt-jane" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin"
Are you getting no hardware errors with that ? No HW errors on 4 Gigabyte and 4 Powercolor cards.
|
|
|
|
KickAzzDude
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2014, 06:37:59 PM |
|
Need to get it on a bigger exchange, the current market cap for this coin is insanely low. We need to promote it more, how's the Chinese support coming? This is a great coin with N-Factor way before it started getting popular which means no multipool has mined and dumped it
|
|
|
|
|
ashao1015
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2014, 09:41:32 AM |
|
Voted for QQC. We need a better exchange, the value of QQCoin will increase!
|
|
|
|
|