Vertcoin - First Scrypt N | First Stealth Address - Privacy without mixer

[djm34]

[

Tried solo but found block rejected.  Has anyone successfully solomined a block?

Bump.  Anyone solomined successfully?  RPC port?

windows wallet, i tried solo  mining,i have enough rigs to find blocks, but all rejected,
RPC port is 5888

solo mining isn't working. I tried yesterday to look into it, but so far I haven't found what was wrong (algo computed right but never gets accepted)

[q327K091]

Hello guys! I hav 570 khash/s from AMD7870 on Lira2R. Is it good hasrate for these GPU?

Or it is not good?

this is what Nvidia 750 TI does for me approx 600K,  I think your hashrate should be higher its a stronger card but and > electrical

[djm34]

Does LYRA2RE support older compute 2.1?

Just try, I haven't tried, in principle the compute 3.0 kernel doesn't have anything which would prevent a 2.1 card from working.  
However you will need to recompile ccminer to allow compute 2.1 to work.

[TheCoinFinder]

I think ultimately it comes down to the targetting (min/max diff settings), the diff1 mask, and the multiplier required.

Scrypt-N pool settings were using the Scrypt Diff1 Mask. Pool target of 16, Min of 16 and Max of 1024.

Lyra2RE settings we are now using the Quark Diff1 Mask (Scrypt Diff1 mask seems to put LTCMAXMYR's rate at around 6gh/s which is obviously wrong also) and the X11 Diff1 Mask results in too many "share above target" settings. Min of 0.1 and Max of 6.4 (based on the 16 to 1024 ratio).

If Hashlink and others can post their settings, we can maybe iron this out.

I don't know if the difference is because of ccminer and sgminer however, but there is something weird.

[djm34]

Hello guys! I hav 570 khash/s from AMD7870 on Lira2R. Is it good hasrate for these GPU?

Or it is not good?

this is what Nvidia 750 TI does for me approx 600K,  I think your hashrate should be higher its a stronger card but and > electrical

you should get a little more on the 750ti (around 660kh/s)

[xyburcoin]

Why bittrex disabled vertcoin?

[q327K091]

I think ultimately it comes down to the targetting (min/max diff settings), the diff1 mask, and the multiplier required.

Scrypt-N pool settings were using the Scrypt Diff1 Mask. Pool target of 16, Min of 16 and Max of 1024.

Lyra2RE settings we are now using the Quark Diff1 Mask (Scrypt Diff1 mask seems to put LTCMAXMYR's rate at around 6gh/s which is obviously wrong also) and the X11 Diff1 Mask results in too many "share above target" settings. Min of 0.1 and Max of 6.4 (based on the 16 to 1024 ratio).

If Hashlink and others can post their settings, we can maybe iron this out.

I don't know if the difference is because of ccminer and sgminer however, but there is something weird.

I see, makes sense, also I just got 100 VERT payout from you just now, thanks  

[q327K091]

Hello guys! I hav 570 khash/s from AMD7870 on Lira2R. Is it good hasrate for these GPU?

Or it is not good?

this is what Nvidia 750 TI does for me approx 600K,  I think your hashrate should be higher its a stronger card but and > electrical

you should get a little more on the 750ti (around 660kh/s)

using Unix ... get around 620kh/s ccminer unlike cudaminer does not allow one to override card frequency, would you mind sharing your ccminer command line (if you are also 750 TI) thanks much

also difficulty went up to 117.90432418, so obviously my hash rate is less from overnight, that is good ASIC's are taken out of equation

[asemov]

I think ultimately it comes down to the targetting (min/max diff settings), the diff1 mask, and the multiplier required.

Scrypt-N pool settings were using the Scrypt Diff1 Mask. Pool target of 16, Min of 16 and Max of 1024.

Lyra2RE settings we are now using the Quark Diff1 Mask (Scrypt Diff1 mask seems to put LTCMAXMYR's rate at around 6gh/s which is obviously wrong also) and the X11 Diff1 Mask results in too many "share above target" settings. Min of 0.1 and Max of 6.4 (based on the 16 to 1024 ratio).

If Hashlink and others can post their settings, we can maybe iron this out.

I don't know if the difference is because of ccminer and sgminer however, but there is something weird.

I believe we've found a solution, but as you know we are using totally different stratum servers, so I don't know how it will be useful to you.
But as soon I'm sure about the "fix" I'll post our settings.

[TheCoinFinder]

I believe we've found a solution, but as you know we are using totally different stratum servers, so I don't know how it will be useful to you.
But as soon I'm sure about the "fix" I'll post our settings.

Excellant to hear I must admit, these type of hashrate things I've always had an issue with. Let's hope it can be resolved

[SectorZero]

Hello guys! I hav 570 khash/s from AMD7870 on Lira2R. Is it good hasrate for these GPU?

Or it is not good?

this is what Nvidia 750 TI does for me approx 600K,  I think your hashrate should be higher its a stronger card but and > electrical

Ok. Thanks!
Can you tell me where i can find sgminer settings for best perfomence for diffferent GPU and for my AMD 7870?

[mrben77]

Why bittrex disabled vertcoin?

Why disabled guys , i still exchange vtc on bittrex , price maybe rising in future

[induktor]

Trademybit seems to be mining the wrong fork, because it tops VTC mining in scrypt-N, or at least that's what the site says, with 500Mh, already posted in their thread.

This thread should be renamed, still says "First Scrypt N" 

[adaseb]

Anybody know why its disabled on Bittrex. I sent my coins there to sell them and now cant access them for the last 24 hours

[Handofmidas]

so who got the nice instamine? was it miners on verters? for the first 500 block x 50 it's about 25000 coins.

can't view the verters blocks as I am not registered there, and still can't register as they don't send out confirmation mails (tried two addresses)...

+1

same problem.

We found 208,301 yes. We recently moved servers, and need to reconfigure the mail server. It does send out emails, however they may be blocked by SPAM rules etc. We are working on this issue.

A breakdown of who found what in the last 300 or so blocks is available here:

http://www.verters.com/block-analysis-slow

Ah lucky guy! I also found it, just the wrong one.

[Prelude]

LTCMAXMYR - ok, 702mh/s is still massive in comparison.

Have you tried my pool since we have adjusted. Just for statistical purposes I'd be interested to know.

i tried over ten minutes, it still wrong,the speed shows 2,458,958 kh/s,it is impossible,indeed 702M +-10M
i don't know what's wrong,

Something is very strange, you've only found 4 blocks. You should be finding a lot more than that.

[sammy007]

People who can't mine solo to daemon, Y U no launch personal stratums? It takes 10 minutes, both nodejs and python projects were listed several pages ago.

[karimdr2]

Does a single 280x (or 7970) use about 150 watt with Lyra2RE? Can someone clarify this?

I confirm, but my 280Xs are undervolted to 1075mV

[Amph]

i've missed the new algo, how much ine 750ti/970/980 is doing with it?

[jk_14]

i've missed the new algo, how much ine 750ti/970/980 is doing with it?

Code:

[2014-12-14 23:09:02] GPU #0: GeForce GTX 750 Ti, 689.46 kH/s
[2014-12-14 23:09:07] GPU #1: GeForce GTX 750 Ti, 689.07 kH/s
[2014-12-14 23:09:07] accepted: 95/95 (100.00%), 1378 khash/s (yay!!!)