★★DigiByte|极特币★★[DGB]✔ Core v6.16.5.1 - DigiShield, DigiSpeed, Segwit

[DigiByte]

If anyone has any other suggestions before we make this the official update release, we have a few hours to make an adjustment. But at this point we do not see any better options?

You can adjust diff using profitability. But if you are sure that there will be no instamine, I don't care. If I right understand, no one can mine 300 blocks with some shitty SHA ASIC in a 5 minutes, right?

This is correct, the diff will catch up very quickly. Plus the other algos need to produce blocks to allow for more of the sha blocks to be created.

[,./,./]

is it right that the multi algo already started about 2.9 days?

[DigiByte]

is it right that the multi algo already started about 2.9 days?

It will start in 2.9 days? Or do you mean has it already started?

It should take 1-2 weeks based up the current speed of the block chain for it to start.

[,./,./]

is it right that the multi algo already started about 2.9 days?

It will start in 2.9 days? Or do you mean has it already started?

It should take 1-2 weeks based up the current speed of the block chain for it to start.

we are now at block #141764
multi algo start at    #145000

145000-141764=3236 blocks

1 block = 1 minute

3236 minutes / 60 = 54 hours

52 / 24 = 2,1 days


I'm crazy? or day I made a mistake?

[DigiByte]

is it right that the multi algo already started about 2.9 days?

It will start in 2.9 days? Or do you mean has it already started?

It should take 1-2 weeks based up the current speed of the block chain for it to start.

we are now at block #141764
multi algo start at    #145000

145000-141764=3236 blocks

1 block = 1 minute

3236 minutes / 60 = 54 hours

52 / 24 = 2,1 days


I'm crazy? or day I made a mistake?

If the chain was working as expected you would be absolutely correct. But since there have been big delays (stuck chain) we used the average over the last couple months to time the change. If we waited 10,000 blocks it could take a month for the change to occur.

[DigiByte]

Post with download links moved to most current page here: https://bitcointalk.org/index.php?topic=408268.msg8458035#msg8458035

[tdcooper99]

Hmmm...  was hoping it was a one off, but I've now encountered this 3x post upgrade to 3.0.1. Windows 32bit.  Had no issues previously with upgrades, including the previous 3.0.0. Each time I choose OK, and it rebuilds and loads my wallet... but then if I close it down and launch again it repeats....

[DigiByte]

Hmmm...  was hoping it was a one off, but I've now encountered this 3x post upgrade to 3.0.1. Windows 32bit.  Had no issues previously with upgrades, including the previous 3.0.0. Each time I choose OK, and it rebuilds and loads my wallet... but then if I close it down and launch again it repeats....

1) Backup your wallet.dat
2) Go to YourUser/AppData/Roaming/DigiByte
3) Delete the "blocks" & "chainstate" folders

The error with the 3.0.0 release will cause this issue. Once you delete those folders it will re-sync correctly.

[,./,./]

Introducing DigiByte v3.0.1 MultiAlgo

Mandatory Update before block 145,000

Ok everyone, here are the 3.0.1 download links! If we could get a few people to help us test it before making it the official release, that would be great. Try sending, receiving and see how it syncs. Also, try mining the other algos. Scrypt should be the only mine-able algo until block 145,000.

We ran it through some rigorous testing the last 24 hours so we should be good to go now! We will update the wallet language translation errors later, once we get everyone updated.

Please give us feedback if everything worked for you, especially with the OSX wallet.

It is very important we get everyone updated before block 145,000 as at that point sending coins from a v3.01 wallet to a v2.9.1 wallet or early could result in problems.


As always, backup your wallet.dat before upgrading! (File -> Backup Wallet -> Select location to save to)

Git Source:
https://github.com/digibyte/DigiByteProject

Windows x64
http://www.digibyte.co/sites/digibyte.co/files//crypto/digibyte-3.0.1-win64-setup.exe
https://dl.dropboxusercontent.com/u/42300902/DigiByte_Wallets_Current/digibyte-3.0.1-win64-setup.exe
https://mega.co.nz/#!JIhUBJSK!dTy7sKFnOKlPepr0KaaecSqoi63Dh_lTPX9AlTXoTSU

Windows x32
http://www.digibyte.co/sites/digibyte.co/files//crypto/digibyte-3.0.1-win32-setup.exe
https://dl.dropboxusercontent.com/u/42300902/DigiByte_Wallets_Current/digibyte-3.0.1-win32-setup.exe

Mac OSX
http://www.digibyte.co/sites/digibyte.co/files//crypto/DigiByte-Qt-v3.0.1.dmg
https://dl.dropboxusercontent.com/u/42300902/DigiByte_Wallets_Current/DigiByte-Qt-v3.0.1.dmg
https://mega.co.nz/#!xZYgTJJa!67Hv70W24QQWIW3mIvfeFcD5u7NsZwfkg_sotvA3bDA

You need to set the algo you want to mine in the digibyte.conf:

Code:

rpcallowip=*
rpcuser=yourusername
rpcpassword=yourpassword
server=1
daemon=1
txindex=1
debug=1
algo=scrypt
rpcport=14022
port=12024
addnode=216.250.125.121
addnode=74.208.230.160
addnode=74.112.204.202
addnode=46.4.32.220
addnode=198.27.109.88
addnode=54.204.36.33
addnode=198.41.184.140
addnode=144.76.94.182
addnode=95.85.50.188
addnode=162.159.240.70

Once multi-algo mining kicks in you need one of these settings in your .conf to solo mine whichever algo you choose:

Code:

algo=scrypt
algo=sha256d
algo=groestl
algo=qubit
algo=skein

\



image is not good....

en = een

bitcoin = digibyte

bitcoin = digibyte

I don't know what's = kern

munten = digibytes || bitcoinadress = digibyteadres

[tdcooper99]

Hmmm...  was hoping it was a one off, but I've now encountered this 3x post upgrade to 3.0.1. Windows 32bit.  Had no issues previously with upgrades, including the previous 3.0.0. Each time I choose OK, and it rebuilds and loads my wallet... but then if I close it down and launch again it repeats....

1) Backup your wallet.dat
2) Go to YourUser/AppData/Roaming/DigiByte
3) Delete the "blocks" & "chainstate" folders

The error with the 3.0.0 release will cause this issue. Once you delete those folders it will re-sync correctly.

Ok, it's re-syncing again now. Will report back shortly.

[DigiByte]

,./,./,

Thanks for the feedback. Does the wallet sync with the net?

We are working on the icon issue. Will also get on the wallet language translation issues later. If you could supply what the translation should be in a list that would be great.

Example:
Bitcoinadres= DigiByteadres?
Bitcoinnetwerk=DigiBytenetwerk?

[Kayahoga]

I am amazed as to how fast the Digibyte block chain syncs, is there anything special about how DGB does things or is it based on the number of transactions in the blockchain?

[gamer1coin]

Post with download links moved to most current page here: https://bitcointalk.org/index.php?topic=408268.msg8387171#msg8387171

Where is this digibyte.conf file in windows located?

[DigiByte]

Post with download links moved to most current page here: https://bitcointalk.org/index.php?topic=408268.msg8387171#msg8387171

Where is this digibyte.conf file in windows located?

C:/users/YourUser/AppData/Roaming/DigiByte

I am amazed as to how fast the Digibyte block chain syncs, is there anything special about how DGB does things or is it based on the number of transactions in the blockchain?

The DigiByte block chain is much smaller so there is less to download. But we have also set up some high speed dns seed servers. We are in the process of setting up two more so there will be 4 total.

[DigiByte]

Post with download links moved to most current page here: https://bitcointalk.org/index.php?topic=408268.msg8458035#msg8458035

[,./,./]

,./,./,

Thanks for the feedback. Does the wallet sync with the net?

We are working on the icon issue. Will also get on the wallet language translation issues later. If you could supply what the translation should be in a list that would be great.

Example:
Bitcoinadres= DigiByteadres?
Bitcoinnetwerk=DigiBytenetwerk?

image 1= image is wrong
image 2= en must be een
image 3=bitcoinadres must be digibyte adres (with space)
image 4= bitcoinnetwerk must be digibyte network (with space)
image 5= kern is a dutch word, the translate is: core but I think It's a bad translate (I don't know what it must be...)
image 6= munten is also a good but I think digibytes is better on that place. bitcoinadres must be digibyte adres (with space)

all images= http://imgur.com/ffSg1kr,gFYMNOf,vOy4eCe,0AESGX2,zUdvhfz,dXDhBUw#5

the wallet is slower than 2.9.1 ( he made slower connection with the network)


there are more translate mistakes... (comming soon)

[DigiByte]

To appbox & other Chinese speakers,

We received these recommendations for the Chinese translation of "DigiByte."

數位幣 (Digital Byte Dollar)
位元幣 (Byte Dollar)
位圓 (Same as above, but coz the 2nd word's sound is same as yuan in china, so I short form that)
惠圓 (Bargain dollar, same sound as above, but make it sound attractive)
迪智幣 (just pronounce as digibyte, same way how bitcoin is called 'bi ter' coin in china)

appbox recommended we translate "比特币" to "极特币"

Any other opinions, we want to get the translation in there so we have a unique translation for DigiByte in the wallet.

[,./,./]

URI must be URL (I think I have never hear of URI)
betalingsverzoek tot (^^^^) must be betalingsverzoek (^^^^^)


tot must be naar
weet u zeker dat u wilt verzenden? must be Weet u zeker dat u dit wilt verzenden?

now time for sleep... I let you know tomorrow about sending and receiving.. of digibytes

[DigiByte]

,./,./ ,

Thank you so much for the help! We are compiling the language updates in as we speak. Just re-download the links tomorrow and language corrections should be in there.

[benjamoyne]

Had to rebuild the block chain after installing the Windows 64 wallet, but other than that it seems to work fine.