[ANN] LEASERIG.NET - rent&hire Quark hashing power!

[khm]

Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?

How to prevent that?

Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.

[Zombie123]

Today's run on middlecoin seems like it will be about .0208 BTC/MH/day those who are advertising their rigs for less than that are just loosing money...

yes guys you will be losing money (few microBTC) for 1 day please raise your price immideately 

Yes i was inferring this .. anyways no loss for me Ill just keep my rig prices slightly above middlecoin earnings and if nobody rents mine because of low-ballers then my rigs will hash away on middlecoin.

+1 exactly. This was what I wrote on middle coin pool thread for which I was bashed lol

Simple Test

"If you think you can earn more on middlecoin then leasing your rig, then lease a rig and mine at middlecoin" -- Zombie123

[Blaater]

cgminer has 5min delay for switch - testing stability. This is another issue  

Is there any interest for leasing SHA256 rigs? The support for SHA256 is really simple from my side. Do people use cgminer 3.7.2+ for SHA256 mining? If yes, then there should be no problems and I will add SHA256 today.

For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.

modified CGMiner for Antminers - is this fork of cgminer, from which version?

I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.

It's a fork of CGMiner 3.8.5

I can give you 40 GH/s on BFGMiner if you want to test it out.

I've set it up on BFGMiner, api group and your ip. I'm ready to go just for you to try it out ;p.

[djeZo]

cgminer has 5min delay for switch - testing stability. This is another issue  

Is there any interest for leasing SHA256 rigs? The support for SHA256 is really simple from my side. Do people use cgminer 3.7.2+ for SHA256 mining? If yes, then there should be no problems and I will add SHA256 today.

For sha-256 mining I use CGMiner 3.10/BFGMiner and the modified CGMiner for Antminers, there are some different miners out there for sha.

modified CGMiner for Antminers - is this fork of cgminer, from which version?

I checked BFGMiner, its API is the same as with cgminer. Should be no issue. Are there any SHA256 rig providers. I would add 2 or 3 on to see how this works out.

It's a fork of CGMiner 3.8.5

I can give you 40 GH/s on BFGMiner if you want to test it out.

I've set it up on BFGMiner, api group and your ip. I'm ready to go just for you to try it out ;p.

Send me PM with your trust URL and name of the rig. I have it read, lets try out First SHA256 leasing rig

[sleepless]

Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?

How to prevent that?

Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.

I have it done like this:

cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777

Is this okay? Cause the save group is added

[Blaater]

Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?

How to prevent that?

Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.

I have it done like this:

cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777

Is this okay? Cause the save group is added

Dont know if it matters but try:
--api-groups "P:switchpool:addpool:removepool:restart:save:*"

i dont think it likes multiple things in your command line, or just add it in your conf file.

[khm]

Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?

How to prevent that?

Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.

I have it done like this:

cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777

Is this okay? Cause the save group is added

I would say no cause you're loading MYCONF.conf but save command will save to default name file which is cgminer.conf

[sleepless]

Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?

How to prevent that?

Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.

I have it done like this:

cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777

Is this okay? Cause the save group is added

I would say no cause you're loading MYCONF.conf but save command will save to default name file which is cgminer.conf

Ahhh okay. So it should work when I put it directly in my config file?

[Squirreljester]

I think you should increase your check time to at least 4 seconds. My rig randomly shows offline on the site but it never is actually offline, and with the changes I've made there's no more drops pinging the internet, so I'm not sure what's going on, but it's not on my end anymore. I'm sure it takes longer than 2 seconds to run through a ping check of 100+ machines from your side.

Also, I'm confused on the displayed price that shows in the rig list. My best price listed is .0198, but I put in .022 on the admin page, and it's .02146 after your cut, so is that .0198 actually correct?

[khm]

Is it normal that after cgminer restarted, the renter's pool isn't restored and I cant switch to it manually because it's gone?

How to prevent that?

Add 'save' command to group assigned to leaserig via API. See first message of this thread for details.

I have it done like this:

cgminer -c MYCONF.conf --api-groups P:switchpool:addpool:removepool:restart:save:* --api-listen --api-allow P:89.212.242.33 --api-port 7777

Is this okay? Cause the save group is added

I would say no cause you're loading MYCONF.conf but save command will save to default name file which is cgminer.conf

Ahhh okay. So it should work when I put it directly in my config file?

Either stop using MYCONF.conf and instead use cgminer.conf as name or add
"include" : "cgminer.conf" to your config file.

[djeZo]

SHA256 support added. Customers can rent SHA256 rigs now with same accounts, providers can add SHA256 rigs just like you added scrypt rigs, no issues at all 

PM me if you would like to rent some SHA256 rigs!

[djeZo]

Issues with mailing are now gone! Password reset emails should now arrive. I tested with gmail and I got mail into inbox folder. But in any case, check your spam folders too if you don't get into inbox.

[BotwinBG]

SHA256 support added. Customers can rent SHA256 rigs now with same accounts, providers can add SHA256 rigs just like you added scrypt rigs, no issues at all 

PM me if you would like to rent some SHA256 rigs!

Interesting. I will try pointing a few Antminers at it when I get home.

[Zombie123]

A couple of people have asked me about Middlecoin profitability.
This is what I do I just find out similar rigs and see how much they are earning and find average for last 2 weeks. that will give a fair idea.

Also, I have made an windows application which I can make opensource which does this 

[s4ndm4ns]

Trim in pool definition doesnt work

[bitlynx]

A couple of people have asked me about Middlecoin profitability.
This is what I do I just find out similar rigs and see how much they are earning and find average for last 2 weeks. that will give a fair idea.

Also, I have made an windows application which I can make opensource which does this 

Please do - I might build a website out of it.

[djeZo]

Trim in pool definition doesnt work

Fixed.

[snipsnoop]

We really need a way of taking the rig offline without it killing the connection stability.
Took mine offline to optimize a few things and was rewarded with 12.82% connection stability.

[Puycheval]

How is it sorted ? I thougt it was by Rated Best Price ?

[Blaater]

Blaater   ShaTestRig   40.00   0.00050000   1   98.00%   Hash. 42.03 GH/s   In 0 hours and -2 minutes

Something going wrong?