[ANN] [CHC] Chaincoin - Network Upgrade 16.3 - SegWit Activated

[Ivanech]

How many active masternodes on CHC network at the moment?

[Taltos777]

155.   if you do a "masternode count"  on the debug you can see that. 

[Feuerbusch]

Hello .. got 2 little problems


Problem 1

how can i setup a masternode on my raspberry pi?

theire is no wallet for it?!






Problem 2


My Masternode on Windows  doesnt gets any paymants..

I got a fix ip whitch is connectable trough the internet

Ports are opened and testet

2017-04-25 21:28:24 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.
2017-04-25 21:28:25 MasternodePOS::mnse - MasternodeB ranking is too low
2017-04-25 21:28:26 MasternodePOS::mnse - MasternodeB ranking is too low
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:11994
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:11996
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:11997
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:11998
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:11999
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12000
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12001
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12002
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12003
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12004
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12005
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12006
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12007
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12008
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12009
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12011
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12012
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12013
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12014
2017-04-25 21:28:29 dsee - Got updated entry for 54.236.42.149:12015
2017-04-25 21:28:29 socket send error Eine bestehende Verbindung wurde softwaregesteuert durch den Hostcomputer abgebrochen.  (10053)
2017-04-25 21:28:45 CheckBlock() : Using non-specific masternode payments 1096728
2017-04-25 21:28:45 CheckBlock() : Found payment(1|200000000) or payee(1|3QJmnh) nHeight 1096728.
2017-04-25 21:28:45   nActualTimespan = 611  before bounds
2017-04-25 21:28:45 GetNextWorkRequired RETARGET
2017-04-25 21:28:45 nTargetTimespan = 720    nActualTimespan = 712
2017-04-25 21:28:45 Before: 1c098621  0000000009862100000000000000000000000000000000000000000000000000
2017-04-25 21:28:45 After:  1c096b09  00000000096b09e0b60b60b60b60b60b60b60b60b60b60b60b60b60b60b60b60
2017-04-25 21:28:45 CheckBlock() : Using non-specific masternode payments 1096728
2017-04-25 21:28:45 CheckBlock() : Found payment(1|200000000) or payee(1|3QJmnh) nHeight 1096728.
2017-04-25 21:28:45 UpdateTip: new best=0000000000906f2211b7217f360fe85df4c402a7b2cc9d0f9d46ecb3e55cfc39  height=1096728  log2_work=50.563718  tx=1213685  date=2017-04-25 21:28:14 progress=0.999999
2017-04-25 21:28:45 ProcessBlock: ACCEPTED
2017-04-25 21:28:54 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.
2017-04-25 21:29:23 CActiveMasternode::Dseep() - RelayMasternodeEntryPing vin = CTxIn(COutPoint(af8dc5090ba24726fbf2ff232effcbbc0bac9b939bddea, 0), scriptSig=)
2017-04-25 21:29:24 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.
2017-04-25 21:29:37 dseep - Asking source node for missing entry CTxIn(COutPoint(b8c8e64e9ae029e2ca6723fc5c24ed40d83b8b77801cc6941267e2e718e528d8, 0), scriptSig=)
2017-04-25 21:29:54 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.
2017-04-25 21:30:23 CActiveMasternode::Dseep() - RelayMasternodeEntryPing vin = CTxIn(COutPoint(af8dc5090ba24726fbf2ff232effcbbc0bac9b939bddeac5a201694cd87b0689, 0), scriptSig=)
2017-04-25 21:30:24 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.
2017-04-25 21:30:54 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.
2017-04-25 21:31:23 CActiveMasternode::Dseep() - RelayMasternodeEntryPing vin = CTxIn(COutPoint(af8dc5090ba24726fbf2ff232effcbbc0bac9b939bddeac5a201694cd87b0689, 0), scriptSig=)
2017-04-25 21:31:24 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.
2017-04-25 21:31:54 CDarksendPool::UpdateState() - Can't set state to ERROR or SUCCESS as a Masternode.


Anyone got a idea why it dosent works?

Maybe dev?



Thank you for help

[BurningMan]

Anyone have a link to the current amd gpu miner?

Links are in the ANN.

I cannot get it to sync the last blocks    always stuck in last hour?   

Download this blockchain and upload it into your chaincoin folder. Should solve the problem.

https://mega.nz/#!Bmo3WAZD!SuC_yffX0oAXII9KZN-ZW2GRVJlO5SzW30glYkQS2qo

[BurningMan]

Dev any help with running multiple masternodes on win?

It was not designed to run multiple masternodes, but you can try running two instances of the wallet (separate .exe, separate .conf file, separate data dir and different ports).

Ty will try.

maybe just get a few raspberry pi wallets set up as MS's if it doesn't work. Let me know how you make out.

So i set up 7 nodes yesterday, 8 hours later 3 were down the rest working, then again started 9 today..2 and a half hours later all are working
It is posibile to run multiple nodes on WINDOWS, for everyone interested i just made multiple wallet folders(chaincoin2,chaincoin3 etc.) Then make bat for every chaincoind you want to run, start them all in controler wallet and thats it.

Thanks, I was hoping I didnt have to do it this way, but I can't get the masternode.conf file to work properly.  You can run a loop with a batch file, then run chaincoind commands that tell it to start every 15 minutes, thats what Im doing with other coins and it works great.

[kingorbust]

how do  I join the slack?

https://chaincoin.herokuapp.com/invite

I go there, input my email and it gives me Failed! invite_limit_reached

[galixxx]

are there instructions on how to setup a mn on windows?

[roidudisco]

Setting up a Chaincoin Masternode https://t.co/taMZR5Pbj6

[kingorbust]

what are the thoughts abotu the price? For a coin onl crypticia, isnt $0.1 quite a high price already? Just wondering.. many  big coins struggle to go to hal  dollar or 1 dollar...is there much  room for growth left?

[Throne187]

what are the thoughts abotu the price? For a coin onl crypticia, isnt $0.1 quite a high price already? Just wondering.. many  big coins struggle to go to hal  dollar or 1 dollar...is there much  room for growth left?

masternodes still quite cheap, thats what people look for right now, and re-branding coming this week + maybe get added to some big exchange

[gabriel0]

Chaincoin was pretty early after Dash to be a coin with masternodes? Will that make the coin more likely to be worth more in the future?

Also, I got bored: https://s22.postimg.org/55im4lckx/deletedelete0193.png

[andrew24p]

Chaincoin was pretty early after Dash to be a coin with masternodes? Will that make the coin more likely to be worth more in the future?

Also, I got bored: https://s22.postimg.org/55im4lckx/deletedelete0193.png

What is the chaincoin code forked from?

[gabriel0]

Chaincoin was pretty early after Dash to be a coin with masternodes? Will that make the coin more likely to be worth more in the future?

What is the chaincoin code forked from?

Bitcoin>Zetacoin>Chaincoin

[esti]

what are the thoughts abotu the price? For a coin onl crypticia, isnt $0.1 quite a high price already? Just wondering.. many  big coins struggle to go to hal  dollar or 1 dollar...is there much  room for growth left?

There are other coins with masternodes that are $0.2. I don't think the price is high yet.

Also it will depend in the marketing, the roadmap, devs, how's the website, if it gets to bittrex. There are a lot of factors. I think that if the website is good enough and the marketing does the job it can get to .2.

[qwep1]

what are the thoughts abotu the price? For a coin onl crypticia, isnt $0.1 quite a high price already? Just wondering.. many  big coins struggle to go to hal  dollar or 1 dollar...is there much  room for growth left?

There are other coins with masternodes that are $0.2. I don't think the price is high yet.

Also it will depend in the marketing, the roadmap, devs, how's the website, if it gets to bittrex. There are a lot of factors. I think that if the website is good enough and the marketing does the job it can get to .2.

2 or 0.20

[Fragbait]

The 2000 sat resistance area has been left behind.

https://www.cryptopia.co.nz/Exchange/?market=CHC_BTC

I think we could use an update here. Volume has really improved which makes acquiring a position easier than before as there are people actually willing to let go of a few masternodes around 9000 sat mark. As a result, the resistance area currently is in 9000-10000 sat area. The wall at 8999 is being eaten as I write this.

https://www.cryptopia.co.nz/Exchange/?market=CHC_BTC


ChainCoin has been the hottest coin in Cryptopia exchange for a while now, only a matter of time when some of the bigger exchanges start paying attention.

[roidudisco]

what are the thoughts abotu the price? For a coin onl crypticia, isnt $0.1 quite a high price already? Just wondering.. many  big coins struggle to go to hal  dollar or 1 dollar...is there much  room for growth left?

There are other coins with masternodes that are $0.2. I don't think the price is high yet.

Also it will depend in the marketing, the roadmap, devs, how's the website, if it gets to bittrex. There are a lot of factors. I think that if the website is good enough and the marketing does the job it can get to .2.

 But only CHC can run a masternode  for 1000 coins

[Throne187]

Less than 2% is locked in masternodes, if you look at other coins that topped already they have over 50% in nodes, so many more room for growth from here.

[TimC]

Less than 2% is locked in masternodes, if you look at other coins that topped already they have over 50% in nodes, so many more room for growth from here.

I think it is about time to either increase the amount per master node to 5000 CHC or 10000 CHC or add the code that only allow one master node per IP address.

It looks like one IP address is running 56 master nodes so that one ip address is 25% of the network. Are there any plans to change the master node setting or should I also be setting up 50 master nodes on my one ip address? Or if I used all my coins then I can setup about 113 master nodes.

[Throne187]

Less than 2% is locked in masternodes, if you look at other coins that topped already they have over 50% in nodes, so many more room for growth from here.

I think it is about time to either increase the amount per master node to 5000 CHC or 10000 CHC or add the code that only allow one master node per IP address.

It looks like one IP address is running 56 master nodes so that one ip address is 25% of the network. Are there any plans to change the master node setting or should I also be setting up 50 master nodes on my one ip address? Or if I used all my coins then I can setup about 113 master nodes.

I also think 5k is ok, but first lets wait and see what happens to the price, no one want them too expensive.