coinspoolco
Newbie
Offline
Activity: 47
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 06:59:08 PM |
|
I have been monitoring the packets from the startum a bit, and I found out that sometimes the pool gives you the same job in a row and thats why there are many rejects.
Here is also my log from cgminer :
[19:56:24] Rejected 4fb672da Diff 822/512 GPU 1 Pool 0 (Job '3' not found) [19:56:31] Rejected 5860ba1b Diff 742/512 GPU 1 Pool 0 (Job '3' not found) [19:56:33] Rejected 1647199e Diff 2.94K/512 GPU 0 Pool 0 (Job '3' not found)
Basicly its the same job and it was handed out 3 times. If you can have a look at this, it might decrease the reject ratio.
|
|
|
|
williamj2543
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 07:05:12 PM |
|
Hash rate is extremely accurate, roughly +-2%. My rejects are at 8.2%
|
██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
|
|
|
jedimstr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 07:23:47 PM |
|
The recent changes have made my rejects go from 3-4% up to over 7% on average now...
Likely because of the server being moved to CA. If you are east coast based it would only cause more latency issues, as it did for me. I see on average 20-30% loss, which is insane. I want to mine here but having to worry about constant spikes in loss is not worth it. I havent seen a single pool with that much loss, ever, not matter what coin is being mined. Region may have less to do with that than you think in this case. I'm also east coast based (NJ/metro NY area) and I get 6.5% rejects: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F7XT0KwL.jpg&t=665&c=gHPxF4yBb2AwAw)
|
|
|
|
williamj2543
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 07:39:53 PM |
|
Hash rate still accurate, and rejects went down to 3% suddenly. Did you change anything in the last 20 minutes???
|
██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
|
|
|
KC82
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 07:46:10 PM |
|
I'm getting a lower reject rate even at my max intensity (18) lately, and profitability is well above LTC as usual too. Glad to see the kinks worked out, good work Terk and team!
|
|
|
|
Capttech08
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 79
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 08:31:51 PM |
|
Can anyone direct me to a place where I can ask some config questions? I got some 280x's in and up and running using the settings I have seen posted around but I am not getting anywhere near the hash rate that they are claiming. I'm not sure if that is because I use GUIMiner-scrypt and Afterburner or not. I have yet to figure out how to successfully set up CGminer with more than 1 gpu.
I would post it here but I don't think that this is the forum for it. Thanks!
|
BTC Tip Jar: 11tK3hF4KN9t2kZbRgqdafdcNMDyPW2ru LTC Tip Jar: LMCBpoiy86H5Gw5Evjt9fRRB6h6ipUCN9V
|
|
|
loul42
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 08:33:17 PM |
|
I m not coming back until we have an EU server
|
|
|
|
MozZ
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 08:36:07 PM |
|
Hi, I've started mining on CleverMining.com about 3 hours ago and have a doubt about my hashrate. Could you please look at this picture and tell me if it ok or not? Because it looks like ~22% of rejects and average hashrate ~2.3 MH/s while my real average hashrate in cgminer is 2.9 MH/s. My BTC is 17yY3vmdPPueEXJHZaLJA2zsqvWcifR2LQ. Thank you. http://upyourpic.org/images/201312/4dycgdarxa.jpg
|
|
|
|
element515
Newbie
Offline
Activity: 27
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 08:41:47 PM |
|
Is it true that you have to subtract the reject rate from the BTC/Mhs? I hash at .9Mh/s and my profits look pretty much like 90% of the rate the website says... taking another 10% out of that seems like a lot.
|
|
|
|
tpaclassic
Newbie
Offline
Activity: 24
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 08:53:47 PM |
|
If you're using the newest cgminer or sgminer, try these settings. They seem to work quite well for two of my Gigabyte 280x's. 717Kh/s at 709wu each. -g 2 -w 256 --lookup-gap 2 --xintensity 768 (xintensity has turned out to be exactly what I needed to do minute adjustments to get all my cards working very well with this pool!) --thread-concurrency 20480 (using the 20480 Lantis bin that comes with the new sgminer) --gpu-engine 1055 --gpu-memclock 1500 --gpu-powertune 20 --auto-fan --gpu-fan 30-85 (I had to set this a few months back because one card kept staying so cool, the fans would turn off and the card would go sick. This forces that card to always have the fans at least at 30% speed) --temp-target 76 --gpu-vddc 1.025 (yes, undervolted to 1.025 and running smoothly) Both cards are currently averaging about 5% rejects with those settings. I'll even link ya to the sgminer thread in case anyone hasn't heard of this wonderful version of cgminer yet. http://coinmyne.proboards.com/thread/24/sgminer-compiled-version-downloadCan anyone direct me to a place where I can ask some config questions? I got some 280x's in and up and running using the settings I have seen posted around but I am not getting anywhere near the hash rate that they are claiming. I'm not sure if that is because I use GUIMiner-scrypt and Afterburner or not. I have yet to figure out how to successfully set up CGminer with more than 1 gpu.
I would post it here but I don't think that this is the forum for it. Thanks!
|
|
|
|
sgsdebruijn
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 09:10:57 PM |
|
2hours 3.2+mh 2.9 reported on CM
11% rejects 1,6% stale And some getworks failures
Whats happening
|
|
|
|
byt411
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 09:26:28 PM |
|
Hi, I've started mining on CleverMining.com about 3 hours ago and have a doubt about my hashrate. Could you please look at this picture and tell me if it ok or not? Because it looks like ~22% of rejects and average hashrate ~2.3 MH/s while my real average hashrate in cgminer is 2.9 MH/s. My BTC is 17yY3vmdPPueEXJHZaLJA2zsqvWcifR2LQ. Thank you. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2F&t=665&c=X3R0-r72180rCA) Is it true that you have to subtract the reject rate from the BTC/Mhs? I hash at .9Mh/s and my profits look pretty much like 90% of the rate the website says... taking another 10% out of that seems like a lot.
2hours 3.2+mh 2.9 reported on CM
11% rejects 1,6% stale And some getworks failures
Whats happening
On clevermining, it is normal to have a bit more of rejected shares. If CleverMining reports a lower hashrate than CGMiner, you need to look under the green circle, which tells you your rejected percentage and hashrate. If they both add up, then it's perfectly normal. If not, please tell us. Also, the profit stats are without the reject rates.
|
|
|
|
Starscream
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 09:31:04 PM |
|
Anyone using R9 290? What setting do you use to get low reject rate? Cause I've been trying this pool all day and my reject rate is floating around 15%~
|
|
|
|
sgsdebruijn
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 09:41:48 PM |
|
Hi, I've started mining on CleverMining.com about 3 hours ago and have a doubt about my hashrate. Could you please look at this picture and tell me if it ok or not? Because it looks like ~22% of rejects and average hashrate ~2.3 MH/s while my real average hashrate in cgminer is 2.9 MH/s. My BTC is 17yY3vmdPPueEXJHZaLJA2zsqvWcifR2LQ. Thank you. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2F&t=665&c=X3R0-r72180rCA) Is it true that you have to subtract the reject rate from the BTC/Mhs? I hash at .9Mh/s and my profits look pretty much like 90% of the rate the website says... taking another 10% out of that seems like a lot.
2hours 3.2+mh 2.9 reported on CM
11% rejects 1,6% stale And some getworks failures
Whats happening
On clevermining, it is normal to have a bit more of rejected shares. If CleverMining reports a lower hashrate than CGMiner, you need to look under the green circle, which tells you your rejected percentage and hashrate. If they both add up, then it's perfectly normal. If not, please tell us. Also, the profit stats are without the reject rates. Rejects ok, know that but the stale shares are no good.
|
|
|
|
SirGeekalot
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 10:06:25 PM |
|
On clevermining, it is normal to have a bit more of rejected shares. If CleverMining reports a lower hashrate than CGMiner, you need to look under the green circle, which tells you your rejected percentage and hashrate. If they both add up, then it's perfectly normal. If not, please tell us. Also, the profit stats are without the reject rates.
ok, so clear this one up for me.. Heres my Username: 1FM487fLK7ocJkd3BipDvYG2fyMHTeDM3Y sometimes my hashrate shows well over what my rig is capable of.. in SGMiner i've had a steady 915KH/s and a ~9% reject rate. my last hours hashrate on CM in 456KH/s with 65.2 kH/s (12.5%) in Rejects.
|
|
|
|
sgsdebruijn
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 10:17:57 PM |
|
Restartet miner and again a lot of Stales ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) Terk, any idea?
|
|
|
|
tblack
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 10:54:26 PM |
|
Hi!
I just started mining here little more than a hour and I get crazy 40-60% rejects. "Rejected untracked stratum share"
What can be the problem?
|
|
|
|
igroock
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 11:25:04 PM |
|
Anyone else think the advertised BTC per mHash is misrepresented? When you take out the rejected shares (8-10% avg. I personally had more than that), whats the bottom line? So in a way its false advertisement.
|
|
|
|
soulcity
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 11:36:30 PM |
|
Tried the pool today.
23.55% rejects from my east coast US location
|
|
|
|
Capttech08
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 79
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2014, 11:38:19 PM |
|
If you're using the newest cgminer or sgminer, try these settings. They seem to work quite well for two of my Gigabyte 280x's. 717Kh/s at 709wu each. -g 2 -w 256 --lookup-gap 2 --xintensity 768 (xintensity has turned out to be exactly what I needed to do minute adjustments to get all my cards working very well with this pool!) --thread-concurrency 20480 (using the 20480 Lantis bin that comes with the new sgminer) --gpu-engine 1055 --gpu-memclock 1500 --gpu-powertune 20 --auto-fan --gpu-fan 30-85 (I had to set this a few months back because one card kept staying so cool, the fans would turn off and the card would go sick. This forces that card to always have the fans at least at 30% speed) --temp-target 76 --gpu-vddc 1.025 (yes, undervolted to 1.025 and running smoothly) Both cards are currently averaging about 5% rejects with those settings. I'll even link ya to the sgminer thread in case anyone hasn't heard of this wonderful version of cgminer yet. http://coinmyne.proboards.com/thread/24/sgminer-compiled-version-downloadCan anyone direct me to a place where I can ask some config questions? I got some 280x's in and up and running using the settings I have seen posted around but I am not getting anywhere near the hash rate that they are claiming. I'm not sure if that is because I use GUIMiner-scrypt and Afterburner or not. I have yet to figure out how to successfully set up CGminer with more than 1 gpu.
I would post it here but I don't think that this is the forum for it. Thanks!
Thanks for the help! I'll mess with these tonight once I get home. Got both cards up to 720 using Thread concurrency-11200, workersize 256, gpu threads-2, vectors-1, and intensity-1. Clocked cards to 1050 core clock and 1500 mem clock with 20+ Power tune. They are stable and have been running that way for about 3 hours now. I'll try your settings once I get CGMiner set up.
|
BTC Tip Jar: 11tK3hF4KN9t2kZbRgqdafdcNMDyPW2ru LTC Tip Jar: LMCBpoiy86H5Gw5Evjt9fRRB6h6ipUCN9V
|
|
|
|