[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[peonminer]

MPH, why are you disabling Myriadcoin's yescrypt algo? I think skein is getting dropped.
https://www.reddit.com/r/myriadcoin/comments/asv1ph/myriadcoin_01640/

Yes, you must have seen our notification. // - Myriadcoin will hardfork soon. Myriadcoin's yescrypt algo mining will be disabled after the hardfork.

No support for the issue of ethash difficulty not changing from 2? Please help!

Has anything been done to fix the difficulty adjustment? Can we get a response from miningpoolhub support please?

[batyr143]

Hello,

I am contacting you on behalf of DigiByte to let you know about the latest
6.17.2 release.
This is an important release that we request all pool operators upgrade to
immediately, as it lays the foundation for our future upgrade to the Odocrypt
mining algorithm.

In addition there are a number of other improvements, specifically the
inclusion of all Bitcoin Core 0.17.1.
You are now also able to run a single digibyted instance to service all mining
algorithms. If you are going to do this, any time that getblocktemplate by
your pool software, you can now submit the algorithm at that time. This
naturally saves significantly on drive / memory utilization. Alternatively you
can simply perform an over-the-top upgrade of your existing setup and things
will remain the same.

You can download the latest stable source code from:
https://github.com/digibyte/digibyte/tree/6.17.2
This is also in the Master branch.

You should _not_ use 7.17.1 branch at this time, it is the development branch
for the upcoming algorithm swap and is not ready for building / testing.

Finally, if you get the opportunity, we would love to know what your coinbase
string is so we can add it to our Wiki:
https://www.dgbwiki.com/index.php?title=Pools
This will allow us to put it in to the DigiExplorer / DigiAssets explorer
later on in the year.

If you could let us know once you have upgraded, we would greatly appreciate
your cooperation

[cryptapus]

...

Finally, if you get the opportunity, we would love to know what your coinbase
string is so we can add it to our Wiki:
https://www.dgbwiki.com/index.php?title=Pools
This will allow us to put it in to the DigiExplorer / DigiAssets explorer
later on in the year.

...

Perhaps you might find this helpful:

https://github.com/cryptapus/php-coinbase-miners

It includes many of the coinbase strings for popular pools (including miningpoolhub) and has some other small indications that are useful for tracking block version updates per pool. You can see it live for Myriadcoin here:

https://cryptapus.org/myr/minerstats/

[moaddip]

hi autoexchange does not work on BTG,coins stuck

[roarde]

MPH, why are you disabling Myriadcoin's yescrypt algo? I think skein is getting dropped.
https://www.reddit.com/r/myriadcoin/comments/asv1ph/myriadcoin_01640/

Yes, you must have seen our notification. // - Myriadcoin will hardfork soon. Myriadcoin's yescrypt algo mining will be disabled after the hardfork.

Please say where you got this misinformation.
Myriadcoin's Skein mining will be disabled after consensus lock-in, and Argon2d-4096 added. Yescrypt remains.
Read the release notice https://github.com/myriadteam/myriadcoin/releases

If MPH wants to disable its Myriad yescrypt pool, that's your business. But please remove the incorrect announcement from your site. We're answering this question four times a day now.

Argon2d-4096 is Argon2d with 1 iteration, 4MB memory cost, 1 thread, 2 lanes. Like UIS and ARG; not like DYN.

[miningpoolhub_support]

hi autoexchange does not work on BTG,coins stuck

Hi, what about now?

[miningpoolhub_support]

MPH, why are you disabling Myriadcoin's yescrypt algo? I think skein is getting dropped.
https://www.reddit.com/r/myriadcoin/comments/asv1ph/myriadcoin_01640/

Yes, you must have seen our notification. // - Myriadcoin will hardfork soon. Myriadcoin's yescrypt algo mining will be disabled after the hardfork.

Please say where you got this misinformation.
Myriadcoin's Skein mining will be disabled after consensus lock-in, and Argon2d-4096 added. Yescrypt remains.
Read the release notice https://github.com/myriadteam/myriadcoin/releases

If MPH wants to disable its Myriad yescrypt pool, that's your business. But please remove the incorrect announcement from your site. We're answering this question four times a day now.

Argon2d-4096 is Argon2d with 1 iteration, 4MB memory cost, 1 thread, 2 lanes. Like UIS and ARG; not like DYN.

Sorry, my bad and it has been fixed. Thanks.

[neogeo]

My ETC coins does not exchange anymore to BTC as i set it up in Auto exchange section(working before a couple of a days)!!!
What is happening???
Any help?

TNX

[ELERONDORDI]

Hi etc to btc auto exchange not working.

[inlist]

Hi! ETC to LTC auto exchange also does not work. I would like to know why it does not work, and when it will work again. Can anybody help me?
More than three days have passed since the last exchange!!!

[Cryptostevo]

Can anyone help me with this? I was mining equihash on miningpoolhub and my wallet balance looks drastically different than what it should be.
I was mining on stratum+tcp://us-east.equihash-hub.miningpoolhub.com:17023

Snapshot of BALANCES from the BALANCES page:
Coin         Normal Wallet     Auto Exchange Wallet   On Exchange   
Bitcoin   0.00499899         0        0   
Zcash   0                  0 (0.00476578)          0   
Zclassic   0.18146933         0          0   
Zencash   0             0.50708627 (8.15461064)   2.78953693   

But, my earnings should be higher than that, so I checked each wallet and found under zencash that my Recent Credit are as follows:
RECENT CREDITS
Last 24 Hours   14.99584652
2019-04-12 (UTC)   14.13967714
2019-04-11 (UTC)   18.17872241
2019-04-10 (UTC)   23.83454629
2019-04-09 (UTC)   0.90728531
2019-04-08 (UTC)   0.42951035
2019-04-07 (UTC)   0.25646438
2019-04-06 (UTC)   0.23453137
2019-04-05 (UTC)   0.20759165
2019-04-04 (UTC)   0.37655739
2019-04-03 (UTC)   0.50791634
2019-04-02 (UTC)   0.18824226
2019-04-01 (UTC)   0.10579150
2019-03-31 (UTC)   0.16552091
2019-03-30 (UTC)   0.46310295

So if my recent credits for zencash are 55 ZEN over the past 3 days, then why does my zen balance only show about 10 ZEN. Where is the rest of it? Or does it take a few days to go from CREDITS to your Wallet?

I appreciate any help in clarification. Thanks

[Potent]

On LTC, worker difficulty is very high & I get an accept once every 7-10 minutes. What's wrong?

[BestBitcoinOdds]

some guy on the DGB qubit pool has no idea how to mine and is throwing a Gh at a pool tripling the expected shares
and destroying the good ratio of found blocks
when i started hashing there the 7 day ratio was around 80% now its 94%
then jumping out when a long block comes out ruining it for anyone hashing non-stop

good job ruining it for everyone since hes prolly just dumping the price down too since hes not really making much money vs the hashing hes throwing at the pool

[miningpoolhub_support]

Hi etc to btc auto exchange not working.

Hi, what about now?

[lupaarSen]

Hi,
Auto exchange not working LTC or BTC for none of my coins, that's very frustrating, i have not time for this, fix this quick.
Before you ask; i have 0.10342767 XMR for exemple it's about 6.26€ now, so fairly enought to be exchanged....

[lupaarSen]

Tried to send 0.00024 BTC to LTC to test....still not working!!!   

[ASeman]

is the Mining pool hub zcash.miningpoolhub.com  hacked?  
I  (my login name on miningpoolhub.com is  AnatoliyA ) mine Zcash, but the reward did not come. In my statistics my workers was displayed correctly, all my share accepted.
There are transactions on the charts, but they are not in the wallet.
Mining day disappeared.
a day has passed and nothing

[DorWarD]

since yesterday, my miner shows that the pool is dead, although I have not changed any settings ...
what could it be? coin Verge.

[lemoreno]

since yesterday, my miner shows that the pool is dead, although I have not changed any settings ...
what could it be? coin Verge.

Hello,

I having this issue as well with Verge and Scrypt they both show a status of dead.

Thanks.

[MKMiners]

My bitcoin balance stuck in auto exchange for a while - 0.00006768. Please convert it to my autoexchange coin preference LTC if possible. I would not like to let that balance go waste. This has been accumulated mining DGB Qubit and autoexchanged accidentally to BTC instead of LTC. My account at 1manshows at gmail dot com

Thanks.