[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[sergunmangos]

Hi to all! =)

What's going on, guys?

http://i.piccy.info/i9/78b68b581f45ebf4a3020233772d68a2/1525756515/250237/1242568/111jpg.jpg

Same, on all ethash pools =(

[papampi]

Hi to all! =)

What's going on, guys?



Same, on all ethash pools =(

MPH pools has some problems lately but also I think you should not use static IP
Pool load balance and change the ip every now and then.
You can check it by pinging same pool from different locations or do it every 5 minutes, you will get so many results.

Check some of the ips bellow :

Code:

m1@m1-desktop-101:~$ ping europe.equihash-hub.miningpoolhub.com
PING europe.equihash-hub.miningpoolhub.com (172.104.106.153) 56(84) bytes of data.
64 bytes from li1716-153.members.linode.com (172.104.106.153): icmp_seq=1 ttl=39 time=342 ms

m1@m1-desktop-101:~$ ping us-east.equihash-hub.miningpoolhub.com
PING us-east.equihash-hub.miningpoolhub.com (172.104.189.59) 56(84) bytes of data.
64 bytes from li1780-59.members.linode.com (172.104.189.59): icmp_seq=1 ttl=41 time=362 ms

m1@m1-desktop-101:~$ ping us-east.equihash-hub.miningpoolhub.com
PING us-east.equihash-hub.miningpoolhub.com (172.104.180.119) 56(84) bytes of data.
64 bytes from li1771-119.members.linode.com (172.104.180.119): icmp_seq=1 ttl=41

m1@m1-desktop-100:~$ ping us-east.equihash-hub.miningpoolhub.com
PING us-east.equihash-hub.miningpoolhub.com (45.79.223.173) 56(84) bytes of data.
64 bytes from li1322-173.members.linode.com (45.79.223.173): icmp_seq=1 ttl=39 time=225 ms

m1@m1-desktop-100:~$ ping europe.equihash-hub.miningpoolhub.com
PING europe.equihash-hub.miningpoolhub.com (45.79.223.173) 56(84) bytes of data.
64 bytes from li1322-173.members.linode.com (45.79.223.173): icmp_seq=1 ttl=39 time=223 ms

In last 2 results even europe and us-east gave same ip

[gugs]

Monero auto exchange stuck or some maintenance is happening?

[ermis1975]

Its not very stable. And europe xmr pool also.

[_Dr2]

Monero auto exchange stuck or some maintenance is happening?

Autoexchange XZC don't work also

[ermis1975]

I live in europe, Can I choose us pool?

[_Dr2]

I live in europe, Can I choose us pool?

If You want then yes.

[Rabinovitch]

Still can't resolve the host europe.cryptonight-hub.miningpoolhub.com:17024

What's going on?

https://check-host.net/check-dns?host=europe.cryptonight-hub.miningpoolhub.com

find an ip which is the fastest. copy and save it somewhere.

and change your host --> C:\Windows\System32\Drivers\etc
edit your host file and add    <saved ip>  europe.cryptonight-hub.miningpoolhub.com
save your file and try to run.
* do not put "#" in front of your IP in your host file *

It does not work when I try to point Claymore's miner directly to IP address found on check-host.net instead of URL (europe.ethash-hub.miningpoolhub.com:20535 in my case). Any other suggestions please? While the pool's owner keeps silence...

Because your DNS provider sucks and doesn't resolve the hostname to a proper IP address.
Use CloudFlare's 1.1.1.1 1.0.0.1 public DNS servers and you should be fine.

Does not work for me either... 

[jkminkov]

it works, google 8.8.8.8 did resolve asia., 1.1.1.1 resolved all,

check that if you have problems https://www.technipages.com/flush-and-reset-the-dns-resolver-cache-using-ipconfig

[Boriss]

I live in europe, Can I choose us pool?

You can choose whatever location you want, but you will have more milliseconds from sending packages to US than EU servers.

[7h3235]

Hi There.

I'm fairly new to miningpoolhub, I used to use NiceHash.

I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.

It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s

Is this a normal behavor?

Thanks.

[7h3235]

Hi There.

I'm fairly new to miningpoolhub, I used to use NiceHash.

I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.

It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s

Is this a normal behavor?

Thanks.

Update: I did some fine tuning, and now it is hashing at stable 30.4Mh/s, and on the dashboard it is showing 4.78Mh/s.... WTF!!!?!??!??!

[Rabinovitch]

it works, google 8.8.8.8 did resolve asia., 1.1.1.1 resolved all,

check that if you have problems https://www.technipages.com/flush-and-reset-the-dns-resolver-cache-using-ipconfig

Maybe I forgot to mention it, but I can successfully dig Digibyte (qbit) and Zcash at Miningpoolhub, the problem is only with ETH...

[Ryzen2700x]

Sad story is that more patches are coming:
http://www.guru3d.com/news-story/intel-has-to-delays-patches-for-new-spectre-ng-vulnerabilities.html

[4ward]

@miningpoolhub
https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics
return incorrect host list for Cryptonight coins

Code:

host_list: "hub.miningpoolhub.com;us-east.hub.miningpoolhub.com;asia.hub.miningpoolhub.com;europe.hub.miningpoolhub.com",

instead of us-east.cryptonight-hub.miningpoolhub.com and hub.miningpoolhub.com is not available on cryptonight ports

https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatistics also returns "hub.miningpoolhub.com"

[CatseyeN]

Hello!

I still cannot connect to EU server for ETH after some updates on pool servers were performed. Before I worked on EU server for few months.
Have to set Asia server instead, it works.
No difference between miner's settings, except of server address.
I need some help...

https://i.imgur.com/c5ZaSCD.png

P.S.: Claymore 9.8 ETH-only mode
Ctrl string: -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal ***.rigName -eworker ***.rigName -esm 2 -epsw x -allpools 1 -mport 127.0.0.1:-3333

[_Dr2]

XZC wallet on Bittrex is working
but autoexchange on MPH is stil switched off 

[Quake4]

Monero stratum on pool page:

  Port no.    20580
  Server

  U.S.:      us-east.cryptonight-hub.miningpoolhub.com:20580
  Europe: europe.cryptonight-hub.miningpoolhub.com:20580
  Asia:     asia.cryptonight-hub.miningpoolhub.com:20580

But API (http://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics) has other address:

"host_list":"hub.miningpoolhub.com;us-east.hub.miningpoolhub.com;asia.hub.miningpoolhub.com;europe.hub.miningpoolhub.com","port":20580

Please correct all to real stratums.
Or you change API?

[ermis1975]

I try to use xmr - stak but I cant login to the pool.
 SOCKET ERROR - [europe.cryptonight-hub.miningpoolhub.com:20580] RECEIVE error: socket closed

[alby1976]

Changed some Eth to BTC using auto exchange a few days ago, BTC hasn't arrived, Eth is gone.
Can this be looked into?