darkfriend77 (OP)
|
|
March 05, 2014, 07:12:40 PM |
|
I am currently at work, Wasted an hour at lunch on the thing. When I get home Ill if your still online I will look up my skype information. How do you update the firmware on the device? It sucks getting a generic board with no labelling or instructions to go with it, especially when it costs me $100 bucks for the thing. I will be so happy when someone comes out with a dual miner option for windows.
You can update the device on wiibox.net ... be sure to use chrome for internet so you can use google translate ... to your language. http://www.bitcoinguru.com.au/gridseed-wiiboxnet-page-translation.htmlI rewrote 2.0.2 to english language .. I'm not sure if 2.0.3 will still allow to ssh into the box ... I hope this helps.
|
|
|
|
vabchgent
|
|
March 05, 2014, 07:17:10 PM |
|
So can I run on 12v 3.75 amps for tonight. I have a 12v 6a coming but might be tomorrow or Friday before i see it. Thanks
In LTC only mode, absolutely! Way more overhead than required. Good luck! Wolfey2014 I will be doing LTC only for tonight. Thanks for the info
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 05, 2014, 07:26:12 PM |
|
I am currently at work, Wasted an hour at lunch on the thing. When I get home Ill if your still online I will look up my skype information. How do you update the firmware on the device? It sucks getting a generic board with no labelling or instructions to go with it, especially when it costs me $100 bucks for the thing. I will be so happy when someone comes out with a dual miner option for windows.
You can update the device on wiibox.net ... be sure to use chrome for internet so you can use google translate ... to your language. http://www.bitcoinguru.com.au/gridseed-wiiboxnet-page-translation.htmlI rewrote 2.0.2 to english language .. I'm not sure if 2.0.3 will still allow to ssh into the box ... I hope this helps. Do you have a download link of your english version of 2.0.2, that would be great, translate is fine and all but still a pain in the ass. Also I do not see anywhere in those pictures where i can upgrade the firmware od the device
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 05, 2014, 07:28:52 PM |
|
So can I run on 12v 3.75 amps for tonight. I have a 12v 6a coming but might be tomorrow or Friday before i see it. Thanks
In LTC only mode, absolutely! Way more overhead than required. Good luck! Wolfey2014 I will be doing LTC only for tonight. Thanks for the info I just used a spare PC PSU for power for everything. It is a 625 80+bronze, should be able to run 8 or so without any problems. One pcie connector can power 3 devices, one IDE connector can power 1 device + the wii board
|
|
|
|
vabchgent
|
|
March 05, 2014, 07:30:26 PM |
|
are the gridseeds center positive as far as power supplies go. Thanks
|
|
|
|
Blueman666
Member
Offline
Activity: 108
Merit: 10
|
|
March 05, 2014, 07:35:06 PM |
|
Not sure if this is old news but I removed the fan from one of mine today and in still air running LTC at 850MHz it gets barely warm. I think will go ahead and build them into a case with just a small fan pushing air out of the back.
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 05, 2014, 07:36:13 PM |
|
are the gridseeds center positive as far as power supplies go. Thanks
The center is positive
|
|
|
|
vabchgent
|
|
March 05, 2014, 07:39:45 PM |
|
are the gridseeds center positive as far as power supplies go. Thanks
The center is positive Thanks just making sure I am getting the right one.
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 05, 2014, 07:44:50 PM |
|
This is the screen i get to, and when I translate the information in the green it is No BTC equipment! and the other one is No LTC equipment In the below pic Worker 4 is my gridseed mining scrypt just through my pc, It is keep up and surpassing my 7870 which runs at 399in cgminer.
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 05, 2014, 07:46:09 PM |
|
are the gridseeds center positive as far as power supplies go. Thanks
The center is positive Thanks just making sure I am getting the right one. I posted my wiring setup and a link to scematics here on the forum see below https://bitcointalk.org/index.php?topic=462923.msg5523268#msg5523268I have pictures there to give you an idea how i wired for a pc psu
|
|
|
|
TrollboxChamp
|
|
March 05, 2014, 08:13:07 PM |
|
I hate to break the news to you summerside.
You might have a DOA controller.
I have a tp-link from lightningasic (well 2 altho 1 is a paperweight). I can only get 1 to work.
I spent about an hour on the first one before i decided maybe this thing is just fucking broken.
Sure enough i plug in the 2nd one using the exact same cables. BAM i was mining.
I would personally just hook a usb hub up to your comp and run as many instances of the cpuminer as u have gridseeds. Sucks...but it will work
|
|
|
|
up2urheadlights
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 05, 2014, 08:25:31 PM |
|
So can I run on 12v 3.75 amps for tonight. I have a 12v 6a coming but might be tomorrow or Friday before i see it. Thanks
I have mine mining scrypt with 12V 1.5A. No problems. Will not work in dual mode though.
|
|
|
|
up2urheadlights
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 05, 2014, 08:40:32 PM |
|
Not sure if this is old news but I removed the fan from one of mine today and in still air running LTC at 850MHz it gets barely warm. I think will go ahead and build them into a case with just a small fan pushing air out of the back.
Nope, I've been waiting for someone to verify this would work. Thanks for being the guinea pig! I didn't want to try this myself as the Asicminer Cube will not function without a fan drawing current (it's an overheat protection thing, I don't think they have temp sensors). I think it'll be time to cut the fan off mine tonight. It's a waste of power and sounds like a jet engine.
|
|
|
|
miner765
Member
Offline
Activity: 96
Merit: 10
|
|
March 05, 2014, 08:56:40 PM |
|
Guys, how to connect 8 or more miners to one PSU? Help a noob out hehe Thanks!
|
|
|
|
darkfriend77 (OP)
|
|
March 05, 2014, 09:05:04 PM |
|
This is the screen i get to, and when I translate the information in the green it is No BTC equipment! and the other one is No LTC equipment
the screen of the wiibox shows that you can access it ... however ... you have it connected to the PC? a normal setup would be like this ... +-------+ +------------+ +--------+ | miner | --usb--> | controller | --rj45--> | router | +-------+ +------------+ +--------+ is this your setup? have you entered a btc and a scrypt pool? in the config page?
|
|
|
|
Andareed
Member
Offline
Activity: 84
Merit: 14
|
|
March 05, 2014, 09:30:26 PM |
|
If you don't want to run a bunch of cpuminers, I have posted modified cgminer sources to allow LTC-only mode: https://github.com/dtbartle/cgminer-gc3355.
|
BTC: 1K54i8Fsu7e7WPu1pQJV6tDa65qXahnHMH LTC: LMfJ2eqsJofTaNtD1dLRZBuKju9qYgwxZj
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 05, 2014, 09:41:09 PM |
|
This is the screen i get to, and when I translate the information in the green it is No BTC equipment! and the other one is No LTC equipment
the screen of the wiibox shows that you can access it ... however ... you have it connected to the PC? a normal setup would be like this ... +-------+ +------------+ +--------+ | miner | --usb--> | controller | --rj45--> | router | +-------+ +------------+ +--------+ is this your setup? have you entered a btc and a scrypt pool? in the config page? I have wiibox conntected to router and usb of wiibox connected to hub and miner connected to hub. wiibox does not see miner, I have all settings for pools entered in wiibox. ALso how to i check firmware of wiibox and or update it. See below for my setup Also as i said part of the time i go to the ip address for the device it just hangs and causes my whole internet to go to shit and i have to reboot my router, never had this before
|
|
|
|
darkfriend77 (OP)
|
|
March 05, 2014, 09:52:36 PM |
|
This is the screen i get to, and when I translate the information in the green it is No BTC equipment! and the other one is No LTC equipment
the screen of the wiibox shows that you can access it ... however ... you have it connected to the PC? a normal setup would be like this ... +-------+ +------------+ +--------+ | miner | --usb--> | controller | --rj45--> | router | +-------+ +------------+ +--------+ is this your setup? have you entered a btc and a scrypt pool? in the config page? I have wiibox conntected to router and usb of wiibox connected to hub and miner connected to hub. wiibox does not see miner, I have all settings for pools entered in wiibox. ALso how to i check firmware of wiibox and or update it. See below for my setup Also as i said part of the time i go to the ip address for the device it just hangs and causes my whole internet to go to shit and i have to reboot my router, never had this before Does the miner blinks when connecting to the Hub ... green / red? Have you tested the device straight to the Computer? Is this one of those first units? red?
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 05, 2014, 09:56:48 PM Last edit: March 05, 2014, 10:24:29 PM by SummersideGuy |
|
This is the screen i get to, and when I translate the information in the green it is No BTC equipment! and the other one is No LTC equipment
the screen of the wiibox shows that you can access it ... however ... you have it connected to the PC? a normal setup would be like this ... +-------+ +------------+ +--------+ | miner | --usb--> | controller | --rj45--> | router | +-------+ +------------+ +--------+ is this your setup? have you entered a btc and a scrypt pool? in the config page? I have wiibox conntected to router and usb of wiibox connected to hub and miner connected to hub. wiibox does not see miner, I have all settings for pools entered in wiibox. ALso how to i check firmware of wiibox and or update it. See below for my setup Also as i said part of the time i go to the ip address for the device it just hangs and causes my whole internet to go to shit and i have to reboot my router, never had this before Does the miner blinks when connecting to the Hub ... green / red? Have you tested the device straight to the Computer? Is this one of those first units? red? Miner is red finned, it works fine on pc getting upwards of 400KH/s on it.. The box is my problem, now all the box does when i try to detect it through wiibox.net or log into it is freeze up my entire network and i have to reboot my router. I am beginning to hate this little wiiboard Below is as far as i get with the board when i can get into it: I am assuming the micro usb on the board is the power and the full size usb on the board is to connect to the hub I bought this thing cause it can dual mine but I guess i might be screwed there thanks to this control board
|
|
|
|
CartmanSPC
Legendary
Offline
Activity: 1270
Merit: 1000
|
|
March 05, 2014, 10:51:12 PM Last edit: March 05, 2014, 11:13:13 PM by CartmanSPC |
|
Video of my first run: http://youtu.be/nu8_IqxVCiQDon't currently have a powered USB hub so I'm not using the wiibox.
|
|
|
|
|