Execoin: | First Open-Source Stealth Wallet Released! | Fast | ASIC-proof

[NineEleven]

Network is working fine and qt wallet works without a glitch. Any update on the electrum one?

Same experience now. Earlier there was some short drop outs in qt-wallet synch due to some nodes perhaps in wrong fork. I have not seen these drop outs anymore.

Also this http://p2poolcoin.com:9173/static/ seems now synched and is in right fork.

It can also see that example "wafflepool" is agen randomly hunting lounges. But due to lack of exchanges they can not exchange they EXEcoins and there is growing amount in unexchanged. It is difficult to estimate what happend after they dump all collected coins to market. And they do because they do not care anything but as fast dump as they can for pay mining reward BTC's to miners. Situation go more and more bad what longer these exchanges do not update they EXEcoin wallets and these "wafflepools" need store more and more.

EDIT:   Oh no. Agen drop out. "No block source available..."  and stuck 337469

Why not devs inform the community on what stage of the current coin, unless it be to investors. another moment and the price breaks the support at 250sat

Soon it looks like "How easy is destroy one coin" case. This do not feel good at all.

Now I understand why Cryptsy, Bitrex, Comcort etc do not start agen full service with EXE. Also if this hassle continue I believe Poloniex need interrupt EXE.
How to continue if wallet do not sync reliable. Now example in my case there is three connections to Network but it stay block 337469 (now 45 hour beghind)

Wallet sync issues solved (some nodes went down because of a problem in datacenter). However, we would like to note that smoothness of network sync depends on number of full independent nodes in the network (and not only on availability of the ones maintained and paid by developers). If somebody in this thread runs Linux with full unfiltered Internet access, please leave execoind up and running and support the network.

I have a running node, and i use it for mining.
since de fork i have listen=0
i can change that if there is no risck of getting forked again
i have 75 000 exe on it

[Gazzatron]

I moved all my coins to Cryptsy before the fork, downloaded the new qt wallet once my mining pool started up and have
no problems with new mined coins being sent to the fully sync'ed qt wallet (block 341519). Still waiting on Cryptsy though.

[tiredofscams]

Dev and community, tweet to moolah about adding Execoin    twitter.com/moolah_io/status/504115205031608320.

This is their tweet: We will be doing a review of coins on MintPal and Moolah at the weekend. Developers and communities are welcome to submit requests.

[tiredofscams]

Dev and community, tweet to moolah about adding Execoin    twitter.com/moolah_io/status/504115205031608320.

This is their tweet: We will be doing a review of coins on MintPal and Moolah at the weekend. Developers and communities are welcome to submit requests.

This is the only option to get Execoin to MINTPAL!

[Qxw]

Wallet sync issues solved (some nodes went down because of a problem in datacenter). .

Wallet sync issue is NOT solved.

Still frequently it get some wrong block count from somewhere.
Wallet tell  somettimes out of sync and is waiting some "futuere" blocks. But current block is same what is block Explorer.

It have happend so many times that this is perhaaps some kind of attack...  please shoot down these assholes or we can wait infinite to get example cryptsy back.

We do not need more and more C class exchanges but we need these some  A  class exchanges work. Two good is better than handfull bullshit.  They can not open depsit wallets agen if wallet is every night out of sync.

Just now, here qt-wallet have zero active connections. This happend several times per day. Sometimes it run several hours until it tell out oof sync and waiting some future block number. (example now it waits 361802 what is totally wrong)

[execoin]

Wallet sync issues solved (some nodes went down because of a problem in datacenter). .

Wallet sync issue is NOT solved.

Still frequently it get some wrong block count from somewhere.
Wallet tell  somettimes out of sync and is waiting some "futuere" blocks. But current block is same what is block Explorer.

It have happend so many times that this is perhaaps some kind of attack...  please shoot down these assholes or we can wait infinite to get example cryptsy back.

We do not need more and more C class exchanges but we need these some  A  class exchanges work. Two good is better than handfull bullshit.  They can not open depsit wallets agen if wallet is every night out of sync.

Just now, here qt-wallet have zero active connections. This happend several times per day. Sometimes it run several hours until it tell out oof sync and waiting some future block number. (example now it waits 361802 what is totally wrong)

listen=0
connect=95.85.26.197
connect=107.170.240.30
connect=162.243.136.142
connect=128.199.233.179
connect=198.211.100.64
connect=192.241.152.198
connect=107.170.79.10
connect=37.139.3.206
connect=188.226.169.188
connect=107.170.227.175
connect=128.199.221.109
connect=107.170.227.176
connect=188.226.169.189
connect=192.241.128.215
connect=107.170.79.12
connect=107.170.12.174
connect=188.226.130.205
connect=95.85.39.247
connect=192.99.166.230
connect=192.99.166.231

[CryptoLTD]

My coins all on cryptsy, their wallet isnt up. I dont have the time to figure out why. Cant dep more & cant withdraw. Ill check back here inna few days.

[execoin]

Exelite lightweight Execoin wallet has been updated (to version 0.3.11.9)

[Qxw]

Exelite lightweight Execoin wallet has been updated (to version 0.3.11.9)

But WHY qt-wallet loose sync frequently.

Just import one priv key to wallet and soon it show just ok. After fifteen minutes I look agen and think I send coins to other address. What hell... wallet is out of sync.
348292 and now waiting estimated block number 363763. (Edit: just now 5.50AM GMT)

With different times, different numbers it loose sync. Sometimes restrat help shortly, sometimes it soon return this kind of state when it get more connections.
Now there is one connection and situation is "out of sync" and this totally wrong block count what it is waiting. Where from it get this wrong data?

Agen day what I can not move my coins due to this hassle with sync.

Two days ago I send over 10k EXE and it fails. Wallet tell balance zero after send and block chan Explorer tell coins sit still in  addres and have not moved. After hours waiting and in this time walllet was also later sunc, I stop waiting. (transfer status in wallet was just ?).

I delete wallet dat (name it agen) and start new. Agen it get sync, then Private key in and it show agen balance. I send agen it to this other address. wallet then zero balance, this ok, and show transfer status ?. Agen wait long time, restart wallet two times. Some times it sync. But coins did not go to other address where I send these.
Agen wallet dat rename and start new. Import priv, agen it show balance ok. This time wallet stau sync and I send coins and this time it success.

What are these sync drop outs with wrong block numbers from some node?

If this can not solve it destroy this coin. What there so difficult to keep nodes in sync so that there is not agen and agen this wrong fork on the air. Who is running this wrong fork and why?

[execoin]

Exelite lightweight Execoin wallet has been updated (to version 0.3.11.9)

But WHY qt-wallet loose sync frequently.

Just import one priv key to wallet and soon it show just ok. After fifteen minutes I look agen and think I send coins to other address. What hell... wallet is out of sync.
348292 and now waiting estimated block number 363763. (Edit: just now 5.50AM GMT)

With different times, different numbers it loose sync. Sometimes restrat help shortly, sometimes it soon return this kind of state when it get more connections.
Now there is one connection and situation is "out of sync" and this totally wrong block count what it is waiting. Where from it get this wrong data?

Agen day what I can not move my coins due to this hassle with sync.

Two days ago I send over 10k EXE and it fails. Wallet tell balance zero after send and block chan Explorer tell coins sit still in  addres and have not moved. After hours waiting and in this time walllet was also later sunc, I stop waiting. (transfer status in wallet was just ?).

I delete wallet dat (name it agen) and start new. Agen it get sync, then Private key in and it show agen balance. I send agen it to this other address. wallet then zero balance, this ok, and show transfer status ?. Agen wait long time, restart wallet two times. Some times it sync. But coins did not go to other address where I send these.
Agen wallet dat rename and start new. Import priv, agen it show balance ok. This time wallet stau sync and I send coins and this time it success.

What are these sync drop outs with wrong block numbers from some node?

If this can not solve it destroy this coin. What there so difficult to keep nodes in sync so that there is not agen and agen this wrong fork on the air. Who is running this wrong fork and why?

Because there are still nodes on wrong fork. Correct block now is 348314.
In order to get rid of wrong nodes you could add the following to execoin.conf https://bitcointalk.org/index.php?topic=491058.msg8566412#msg8566412

[llildur]

Hey guys please vote EXE for Casheer acceptance http://forum.casheer.net/viewtopic.php?f=15&t=161 and http://forum.casheer.net/viewforum.php?f=15 

[flound1129]

Exelite lightweight Execoin wallet has been updated (to version 0.3.11.9)

But WHY qt-wallet loose sync frequently.

Just import one priv key to wallet and soon it show just ok. After fifteen minutes I look agen and think I send coins to other address. What hell... wallet is out of sync.
348292 and now waiting estimated block number 363763. (Edit: just now 5.50AM GMT)

With different times, different numbers it loose sync. Sometimes restrat help shortly, sometimes it soon return this kind of state when it get more connections.
Now there is one connection and situation is "out of sync" and this totally wrong block count what it is waiting. Where from it get this wrong data?

Agen day what I can not move my coins due to this hassle with sync.

Two days ago I send over 10k EXE and it fails. Wallet tell balance zero after send and block chan Explorer tell coins sit still in  addres and have not moved. After hours waiting and in this time walllet was also later sunc, I stop waiting. (transfer status in wallet was just ?).

I delete wallet dat (name it agen) and start new. Agen it get sync, then Private key in and it show agen balance. I send agen it to this other address. wallet then zero balance, this ok, and show transfer status ?. Agen wait long time, restart wallet two times. Some times it sync. But coins did not go to other address where I send these.
Agen wallet dat rename and start new. Import priv, agen it show balance ok. This time wallet stau sync and I send coins and this time it success.

What are these sync drop outs with wrong block numbers from some node?

If this can not solve it destroy this coin. What there so difficult to keep nodes in sync so that there is not agen and agen this wrong fork on the air. Who is running this wrong fork and why?

Because there are still nodes on wrong fork. Correct block now is 348314.
In order to get rid of wrong nodes you could add the following to execoin.conf https://bitcointalk.org/index.php?topic=491058.msg8566412#msg8566412

You can't fix a fork with addnodes.  You need to checkpoint the correct chain at a point after the fork.

why is the chain still forking?

[Qxw]

Something have happend and it seems that least gt-wallet sync ok and stay now mostly with 8 active connections. (I have not tested Exelite and other wallets..)





And more good news.

It looks like Comcort is now ok with EXEcoin wallet  (just made one test deposit and it works perfect)

Still waiting Cryptsy (of course exchange there works but EXE wallet  disabled, so can not withdraw / deposit.

[pangu]

Something have happend and it seems that least gt-wallet sync ok and stay now mostly with 8 active connections. (I have not tested Exelite and other wallets..)





And more good news.

It looks like Comcort is now ok with EXEcoin wallet  (just made one test deposit and it works perfect)

Still waiting Cryptsy (of course exchange there works but EXE wallet  disabled, so can not withdraw / deposit.

+1 great

[coin1688]

waiting crypsty deposit open...

nice...

[TagBot]

Translation from Google

Help! Downloaded Exelite 0.3.11.9. Mining Execoin pool http[Suspicious link removed]coin.net . Sent to the address wallet EJ55cQq2eayysUScGqygvHceKLUHC2mdbx . Nothing has come. 0 Although the sync goes. Wallet works. Prior to that sent to Cryptsy. What to do? Wait? Or not wait?

http://execo.in/  explorer.execoin.net Here he writes

Address not seen on the network.

Help!

[zzricezz]

electrum wallet would'nt sync, do you have the same problem ?

mine not connected to electrum server

I haven't heard a word from the dev if this will ever get fixed felt scammed into transferring all of my coins into a wallet they know wouldn't work after fork. 

You can export your private keys using the 'dumpprivkeys' command:
$ ./electrum dumpprivkeys
And import them into regular Electrum-Qt thereafter.

Thanks I was able to run dumpprivkeys() from console and got the keys.

Can you tell me where I can download Electrum-Qt?  I downloaded Electrum-EXE 1.9.8.4 but it not connecting to the servers. 

And When I go to Wallet->Private Keys->Import it gives me this warning

Imported keys are not recoverable from seed. If you ever need to restore your wallet from its seed, these keys will be lost.

Are you sure you understand what you are doing?

Clearly i don't so please advise if that is what I should be doing? 

[execoin]

electrum wallet would'nt sync, do you have the same problem ?

mine not connected to electrum server

I haven't heard a word from the dev if this will ever get fixed felt scammed into transferring all of my coins into a wallet they know wouldn't work after fork. 

You can export your private keys using the 'dumpprivkeys' command:
$ ./electrum dumpprivkeys
And import them into regular Electrum-Qt thereafter.

Thanks I was able to run dumpprivkeys() from console and got the keys.

Can you tell me where I can download Electrum-Qt?  I downloaded Electrum-EXE 1.9.8.4 but it not connecting to the servers. 

And When I go to Wallet->Private Keys->Import it gives me this warning

Imported keys are not recoverable from seed. If you ever need to restore your wallet from its seed, these keys will be lost.

Are you sure you understand what you are doing?

Clearly i don't so please advise if that is what I should be doing? 

Correction:
>And import them into regular Electrum-Qt thereafter.
And import them into regular Execoin-Qt thereafter. (not Electrum)

[tiredofscams]

Moolah and Mintpal are conducting reviews of coins eligible for listing on Mintpal and Moolah V2. Dev, please confirm Execoin is one of the coins proposed. Checking the following link we should become a verified coin: http:/[Suspicious link removed]/tpIGgH42YD   

Dev, please confirm you are on it and we have applied or will appy to become a verified coin. Cripto Asian is doing the Pod: cryptoasian.com/

Verified Markets

We will be introducing a new flag in the form of verified markets. A verified market is one that has met the following requirements.

    Developer identity verified (commonly known as POD).
    Valid roadmap published to the general public, with rough timelines also included.
    Functional wallet.
    Functional blockchain explorer.
    Functional website.
    Coin older than 90 days.
    A meeting between ourselves and the developers, to get a feel for the project and the people behind it.

We will be adhering strictly to data confidentiality as per our legal requirements (we are a registered data controller with the Information Commissioner’s Office), and your details will only be passed over as a part of any legal request arising from negligence or fraudulent activity on behalf of the developers in question.

A coin can be flagged as developer identity verified without being flagged as a verified market..

THIS IS WHAT EXECOIN NEEDS TO GET ON THE CRYPTO MAP IN FULL SWING.

Let's do something. If there is any help needed from the community, let us know, dev.

[Jeff Jefferson]

guys been away for some time. Can't find a working Mac wallet. Please help! Need to update!