TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 09, 2019, 04:45:25 AM |
|
New release 2.1.9 is available: - new algo Myriad-Groestl (Myriad, DigiByte, Verge, etc) - fixes a 'duplicate share' bug on very fast systems - add new command line options (-PRT & -PRS) to control performance information output on the screen - add core & mem clock information to the performance report Sample for the new options: -PRT INT Performance-Report & information after INT multiple of 15 seconds Set INT to 0 to disable output after a fixed timeframe sample -RPT 24 shows the performance report after 24 * 5 sec = 2 minutes Default: -PRT 3 -PRS INT Performance-Report & information after a INT shares found Set INT to 0 to disable output after a fixed number of shares sample -RPS 10 shows the performance report after 10 shares were found Default: -PRS 0 Mixed sample: - You want to see the performance report all 25 shares and all 30 secs: -PRS 25 -PRT 6 - You do not want to see any performance report: -PRT 0 Download-link: https://TradeProject.de/download/Miner/TT-Miner.zipLet me know if you run into any issues. Happy mining! Hi TT, Lyra2v3 don´t work. Maybe some libraries missing? Yes, the algo library is missing cause it isn't ready yet. It is coming next in a few days. I forgot to remove it from the readme. Hope you can enjoy one of the other algos until it is finished? Happy mining!
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 09, 2019, 08:23:03 AM Last edit: February 09, 2019, 09:09:52 AM by TrailingStop |
|
Some people asking for perforemance figures so I share the settings and performance of my (development) system. In the past I run the GPU @ 55% with 0c and 0m, but for this test I found out that the GPU improves the hashrate a lot if I add some MHz on clock. But please keep in mind that for you the most important number is not what the miner shows to you, but what you finally get @ the pool in shares, hashrate and monies! I run it now with these settings for MTP: GIGABYTE GeForce GTX 1070 Aorus 8GB with 55% Powerlimit, Core @ 150, Mem @ 0, driver 717.11 Here is the screenshot of TT and AB after more than 30 minutes mining XZC on MintPond:
|
|
|
|
gusknure
Newbie
Offline
Activity: 40
Merit: 0
|
|
February 11, 2019, 10:55:43 PM |
|
Hi TrailingStop, Last version looks pretty stable. Can you add more hashes? At this moment v_2.1.9 gives about 3.6 per card, 1080Ti
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 12, 2019, 02:07:36 AM |
|
Hi TrailingStop, Last version looks pretty stable. Can you add more hashes? At this moment v_2.1.9 gives about 3.6 per card, 1080Ti
Hi - I sent you a PM with a link to the latest beta
|
|
|
|
|
darkfanat
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 13, 2019, 11:43:18 PM |
|
1:31:01 #######: switch to DEV mining for 179 seconds..... 1:34:01 #######: switch back to regular mining..... but not 179 seconds cheaters 14.02.2019 1:26:32 Added TT-Miner.exe TCP 192.168.0.111:55167 54.36.109.3:8080 14.02.2019 1:34:01 Removed TT-Miner.exe TCP 192.168.0.111:55167 54.36.109.3:8080
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 14, 2019, 02:55:43 AM |
|
1:31:01 #######: switch to DEV mining for 179 seconds..... 1:34:01 #######: switch back to regular mining..... but not 179 seconds cheaters 14.02.2019 1:26:32 Added TT-Miner.exe TCP 192.168.0.111:55167 54.36.109.3:8080 14.02.2019 1:34:01 Removed TT-Miner.exe TCP 192.168.0.111:55167 54.36.109.3:8080 What is your problem? Ah got it: 5 hours mining = 300 minutes. 1% of 300 minutes = 3 minutes = 180 seconds - not 179. Maybe a rounding issue? I didn't spent too much tim into this and used my time to improve the miner, add new algos and fixed bugs. Maybe I can send you a fix later - didn't thought that this is an issue.
|
|
|
|
darkfanat
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 14, 2019, 03:07:10 AM |
|
14.02.2019 1:26:32 Added TT-Miner.exe TCP 192.168.0.111:55167 54.36.109.3:8080 Start dev fee 14.02.2019 1:34:01 Removed TT-Miner.exe TCP 192.168.0.111:55167 54.36.109.3:8080 End dev fee total 7 min 29 sec
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 14, 2019, 03:12:07 AM |
|
14.02.2019 1:26:32 Added TT-Miner.exe TCP 192.168.0.111:55167 54.36.109.3:8080 Start dev fee 14.02.2019 1:34:01 Removed TT-Miner.exe TCP 192.168.0.111:55167 54.36.109.3:8080 End dev fee total 7 min 29 sec
Is it possible that you run tt bevor the last dev session for less than 5 hours? It will save that time into the next dev session. It will next mine more than 1% for me please check a day!
|
|
|
|
darkfanat
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 14, 2019, 03:14:34 AM |
|
Oк
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 14, 2019, 03:18:13 AM |
|
Oк
you can also see the log using tt with '-logpool'. That contains the communication with the pool including timings.
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 14, 2019, 07:39:25 PM |
|
Hi darkfanat, I checked the sources to find out what might happened. So here is how tt does the dev-mining in detail: 1. send a ping to all pools that are OK for the selected algo (to find out which one is close and offer good latency) (3min before dev-mining) 2. open the connection to the pool 3. if that fails for any reason take the next best pool and go back to step 2 3. do dev mining I recommend that you do your analysis using Wireshark ( https://www.wireshark.org/). That way you can see if there is mining on the dev channel or if the socket is just ready to use. If you want to can do a full alnalyse of the data going through this socket and get a full picture of what is really going on. Let me know if you have more questions.
|
|
|
|
darkfanat
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 14, 2019, 10:30:11 PM |
|
ok no problem.
|
|
|
|
|
UselessGuru
Jr. Member
Offline
Activity: 200
Merit: 3
|
|
February 15, 2019, 06:32:29 AM Last edit: February 15, 2019, 07:06:37 AM by UselessGuru |
|
Where can I get a version that supports LYRA2V3-100, LYRA2V3 Lyra2Rev3 (Vertcoin) LYRA2V3-92 ?? My computer says: TT-Miner.exe --api-bind 127.0.0.1:4002 -A LYRA2V3-100 -P *******************************.multipoolminer:x@lyra2rev3.eu.nicehash.com:3373 -RH -d 0 TT-Miner - Version: 2.1.10 (Feb 13 2019 23:11:20) Press 'q' to stop mining and terminate
Active algo: Unknown Found one CUDA device * #0 PCI 0:1 Gigabyte GeForce GTX 1080 Ti (6.1) CoreClk 139 MHz | MemClk 405 MHz | 11264 MB | SM: 28
ID:0 - Primary pool: lyra2rev3.eu.nicehash.com:3373 Wallet: 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo Worker: multipoolminer No backup pool defined
Hashrate reporting to the pool enabled Nonce generation: mode 3, timeout: 0.00 secs.
API-Interface enabled. Listening on 127.0.0.1:4002
07:25:00 Cannot load the algo dll (18)
|
Co-developer of www.nemosminer.com (http://www.nemosminer.com)
|
|
|
yurasic park
Newbie
Offline
Activity: 15
Merit: 0
|
|
February 15, 2019, 02:11:50 PM |
|
Make it possible for downloading to be able to select the version of the miner. Version 2.1.10 works much worse than 2.1.9.
|
|
|
|
andrucrypt
Member
Offline
Activity: 720
Merit: 49
|
|
February 15, 2019, 03:03:20 PM |
|
Just living this link here ) I was curious how you get that clean tests, but looks like virustotal doesn't work with archives So this is still not an easy task to make miner "not a miner" for anti-viruses.
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 15, 2019, 03:25:17 PM |
|
Just living this link here ) I was curious how you get that clean tests, but looks like virustotal doesn't work with archives So this is still not an easy task to make miner "not a miner" for anti-viruses. At least they work with other archives, you can check with any other miner. It seems to me that I do not have any code sequences in TT-Miner that is suspected to be a virus - or used by an virus? On the other side i will not discoluser these kind of information/technology because it could be used to 'hide' a virus and I do not want to support that.
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 15, 2019, 03:26:26 PM |
|
Where can I get a version that supports LYRA2V3-100, LYRA2V3 Lyra2Rev3 (Vertcoin) LYRA2V3-92 ?? My computer says: TT-Miner.exe --api-bind 127.0.0.1:4002 -A LYRA2V3-100 -P *******************************.multipoolminer:x@lyra2rev3.eu.nicehash.com:3373 -RH -d 0 TT-Miner - Version: 2.1.10 (Feb 13 2019 23:11:20) Press 'q' to stop mining and terminate
Active algo: Unknown Found one CUDA device * #0 PCI 0:1 Gigabyte GeForce GTX 1080 Ti (6.1) CoreClk 139 MHz | MemClk 405 MHz | 11264 MB | SM: 28
ID:0 - Primary pool: lyra2rev3.eu.nicehash.com:3373 Wallet: 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo Worker: multipoolminer No backup pool defined
Hashrate reporting to the pool enabled Nonce generation: mode 3, timeout: 0.00 secs.
API-Interface enabled. Listening on 127.0.0.1:4002
07:25:00 Cannot load the algo dll (18) Will come later today or tomorrow morning. Hope this is still OK for you?
|
|
|
|
UselessGuru
Jr. Member
Offline
Activity: 200
Merit: 3
|
|
February 15, 2019, 08:01:32 PM |
|
Where can I get a version that supports LYRA2V3-100, LYRA2V3 Lyra2Rev3 (Vertcoin) LYRA2V3-92 ?? My computer says: TT-Miner.exe --api-bind 127.0.0.1:4002 -A LYRA2V3-100 -P *******************************.multipoolminer:x@lyra2rev3.eu.nicehash.com:3373 -RH -d 0 TT-Miner - Version: 2.1.10 (Feb 13 2019 23:11:20) Press 'q' to stop mining and terminate
Active algo: Unknown Found one CUDA device * #0 PCI 0:1 Gigabyte GeForce GTX 1080 Ti (6.1) CoreClk 139 MHz | MemClk 405 MHz | 11264 MB | SM: 28
ID:0 - Primary pool: lyra2rev3.eu.nicehash.com:3373 Wallet: 3JQt8RezoGeEmA5ziAKNvxk34cM9JWsMCo Worker: multipoolminer No backup pool defined
Hashrate reporting to the pool enabled Nonce generation: mode 3, timeout: 0.00 secs.
API-Interface enabled. Listening on 127.0.0.1:4002
07:25:00 Cannot load the algo dll (18) Will come later today or tomorrow morning. Hope this is still OK for you? Fine with me :-) Thank you for your great work.
|
Co-developer of www.nemosminer.com (http://www.nemosminer.com)
|
|
|
|