[ANN] BEAM | Mimblewimble | Private | Scalable | No ICO | No Pre Mine

[realbminer]

We’re pleased to release Bminer 11.3.0.

The release provides:

Support mining beam over beepool.
Output solution/s instead of nounce/s when mining beam.

Bminer 11.2.0

Experimental support for beam.

Please see https://www.bminer.me for more details.

Happy mining!

[percenter]

We’re pleased to release Bminer 11.3.0.

The release provides:

Support mining beam over beepool.
Output solution/s instead of nounce/s when mining beam.

Bminer 11.2.0

Experimental support for beam.

Please see https://www.bminer.me for more details.

Happy mining!

Impossible for mine BEAM with Bminer (not for AMD cards)

[percenter]

I think there is a mistake in the BEAM mining program.
80% of my farms do not show speed on 1 videocard
I have 4 videocards (RX-480) on each farm,
and the miner shows the speed (7-8 sol) only on 3 video cards.
on one of videocard show only 1-2 sol speed.
If I run ETH mining (Claymore v.12), then all video cards work very well.
Does anyone know how to solve this problem?

you could try running separate mining instances for each card...

how to do it?
here is my program launch line:
beam-opencl-miner --server beam-eu.sparkpool.com:2222 --key beamwallet.workername

[realbminer]

We’re pleased to release Bminer 11.3.0.

The release provides:

Support mining beam over beepool.
Output solution/s instead of nounce/s when mining beam.

Bminer 11.2.0

Experimental support for beam.

Please see https://www.bminer.me for more details.

Happy mining!

Impossible for mine BEAM with Bminer (not for AMD cards)

Yeah, NVIDIA GPUs only at this moment.

[percenter]

I think there is a mistake in the BEAM mining program.
80% of my farms do not show speed on 1 videocard
I have 4 videocards (RX-480) on each farm,
and the miner shows the speed (7-8 sol) only on 3 video cards.
on one of videocard show only 1-2 sol speed.
If I run ETH mining (Claymore v.12), then all video cards work very well.
Does anyone know how to solve this problem?

increase your virtual memory to the 32000 range

I increase VM from 16384 to 32768 and no result:
Performance: 8.60 sol/s 0.40 sol/s 8.60 sol/s 8.67 sol/s | Total: 26.27 sol/s

[BeamPrivacy]

IMPORTANT ANNOUNCEMENT FOR ALL USERS

To make sure you send and receive transaction correctly follow the procedure:

1. Make sure you use permanent SBBS address (address with expire = never) when registering with pool

2. Whether you run a wallet or a node:

MAKE SURE THE TIME ON YOUR MACHINE IS CORRECT.

USE AUTOMATIC TIME SYNCHRONIZATION OR SET THE CORRECT TIME MANUALLY.

IF YOUR MACHINE TIME IS NOT SET CORRECTLY YOU WILL EXPERIENCE PROBLEMS WITH SENDING AND RECEIVING TRANSACTIONS

3. Make sure the wallet is online until the transaction is 'Completed'

[fapar]

I think there is a mistake in the BEAM mining program.
80% of my farms do not show speed on 1 videocard
I have 4 videocards (RX-480) on each farm,
and the miner shows the speed (7-8 sol) only on 3 video cards.
on one of videocard show only 1-2 sol speed.
If I run ETH mining (Claymore v.12), then all video cards work very well.
Does anyone know how to solve this problem?

you could try running separate mining instances for each card...

how to do it?
here is my program launch line:
beam-opencl-miner --server beam-eu.sparkpool.com:2222 --key beamwallet.workername

The option "--devices" is used to select videocards. By default, it is set to 0 and uses all available videoadapters (--devices 0).
For example, --devices 0,1,2

[percenter]

Thanks, but your method not help see my line:
beam-opencl-miner --server beam-eu.sparkpool.com:2222 --key beamwallet.workername --devices 0,1,2,3

Performance: 8.27 sol/s 0.87 sol/s 7.53 sol/s 10.40 sol/s | Total: 27.07 sol/s
Performance: 7.13 sol/s 0.60 sol/s 8.47 sol/s 7.00 sol/s | Total: 23.20 sol/s
Performance: 7.07 sol/s 0.73 sol/s 7.20 sol/s 7.80 sol/s | Total: 22.80 sol/s

[BeamPrivacy]

Thanks to all the Exchanges that support Beam at its early stage. The circulating amount of Beam is what can be found on the Blockchain Explorer. https://explorer.beam.mw/blocks

[annapotpot]

BEAM Mining pool by Leafpool

Our pool is now online. Join our telegram/discord for support.

Pool URL : https://beam.leafpool.com/
 *  No registration required
 *  Pool running on a dedicated server
 *  Stratum servers located in: US Eastcoast, US Westcoast and Europe
 *  Almost instant payouts
 *  Minimum payout
 *  Low pool fee
 *  Discord channel: https://discord.gg/ZrvWWjC
 *  Telegram group: https://t.me/leafpool_mining

[MrSmokey]

Can comeone post a screen shot of the extract button on sparkpool ??

It start to look like a legend over here

[utente01]

BEAM Mining pool by Leafpool

Our pool is now online. Join our telegram/discord for support.

Pool URL : https://beam.leafpool.com/
 *  No registration required
 *  Pool running on a dedicated server
 *  Stratum servers located in: US Eastcoast, US Westcoast and Europe
 *  Almost instant payouts
 *  Minimum payout
 *  Low pool fee
 *  Discord channel: https://discord.gg/ZrvWWjC
 *  Telegram group: https://t.me/leafpool_mining

payment is manual or automatic?

[alexcrys1]

Thanks, but your method not help see my line:
beam-opencl-miner --server beam-eu.sparkpool.com:2222 --key beamwallet.workername --devices 0,1,2,3

Performance: 8.27 sol/s 0.87 sol/s 7.53 sol/s 10.40 sol/s | Total: 27.07 sol/s
Performance: 7.13 sol/s 0.60 sol/s 8.47 sol/s 7.00 sol/s | Total: 23.20 sol/s
Performance: 7.07 sol/s 0.73 sol/s 7.20 sol/s 7.80 sol/s | Total: 22.80 sol/s

I have the same issuse(gpu on monitor has problems) disable gpu 1 and mine altcoin, ex: --devices 0,2,3

[percenter]

I have the same issuse(gpu on monitor has problems) disable gpu 1 and mine altcoin, ex: --devices 0,2,3
[/quote]

I do not have a single farm to which the monitor is connected.
There is only a main computer and I connect to each farm on a remote desktop.
I am connected by LAN.

[maxpower666]

Can comeone post a screen shot of the extract button on sparkpool ??

It start to look like a legend over here

dont have screenshot, but today i saw it and used it

after 1-2 days waiting, next to balance

[mrshaw070]

Running strong on my 5x AMD RX580 Rig, anyone else mining with 580's? if so what are you getting out of them?
On avg I'm getting a 44 sol/s output, with highs of 46 sol/s and lows of 41 sol/s

output log:
Performance: 9.07 sol/s 7.67 sol/s 8.53 sol/s 9.40 sol/s 10.00 sol/s | Total: 44.67 sol/s
Performance: 8.67 sol/s 8.67 sol/s 10.33 sol/s 9.80 sol/s 8.27 sol/s | Total: 45.73 sol/s
Performance: 8.73 sol/s 8.87 sol/s 8.93 sol/s 9.27 sol/s 9.53 sol/s | Total: 45.33 sol/s
Performance: 8.20 sol/s 8.93 sol/s 9.47 sol/s 8.33 sol/s 8.00 sol/s | Total: 42.93 sol/s

The rig draws 560watt @ the wall using the following settings:
Core clock @ 1250MHz
Memory clock @1850MHz
and undervolted to 870 (except 1 card which became unstable so that runs at 900)


I'm curious to hear what others are getting with their RX580's!

Mining on sparkspool works like a charm for me, just received my first withdrawal :thumbsup:

[rgsnedds]

I think there is a mistake in the BEAM mining program.
80% of my farms do not show speed on 1 videocard
I have 4 videocards (RX-480) on each farm,
and the miner shows the speed (7-8 sol) only on 3 video cards.
on one of videocard show only 1-2 sol speed.
If I run ETH mining (Claymore v.12), then all video cards work very well.
Does anyone know how to solve this problem?

you could try running separate mining instances for each card...

how to do it?
here is my program launch line:
beam-opencl-miner --server beam-eu.sparkpool.com:2222 --key beamwallet.workername

The option "--devices" is used to select videocards. By default, it is set to 0 and uses all available videoadapters (--devices 0).
For example, --devices 0,1,2

yes, this.

thanks for responding to the question. if your pool supports worker names, simply run a new terminal window for each card, or each rig - to your preference and specify which devices you run on each terminal... in most cases with most coins, it is beneficial to run a separate instance for each GPU. I've always found at least a 1% bump in overall hash rate doing it this way, but for some, I understand it could be a lot of work.

[Hanty86]

Rigs 6*470 4Gb
Have problem with one card for rigs.
Performance: 7.20 sol/s 8.40 sol/s 7.93 sol/s 7.07 sol/s 0.93 sol/s 6.67 sol/s | Total: 38.20 sol/s
Performance: 7.33 sol/s 8.27 sol/s 7.80 sol/s 7.13 sol/s 1.00 sol/s 6.33 sol/s | Total: 37.87 sol/s
Performance: 7.13 sol/s 8.07 sol/s 6.20 sol/s 8.80 sol/s 0.87 sol/s 6.80 sol/s | Total: 37.87 sol/s
Performance: 8.20 sol/s 8.40 sol/s 7.53 sol/s 7.53 sol/s 0.73 sol/s 8.13 sol/s | Total: 40.53 sol/s

What is the reason?

[rgsnedds]

Rigs 6*470 4Gb
Have problem with one card for rigs.
Performance: 7.20 sol/s 8.40 sol/s 7.93 sol/s 7.07 sol/s 0.93 sol/s 6.67 sol/s | Total: 38.20 sol/s
Performance: 7.33 sol/s 8.27 sol/s 7.80 sol/s 7.13 sol/s 1.00 sol/s 6.33 sol/s | Total: 37.87 sol/s
Performance: 7.13 sol/s 8.07 sol/s 6.20 sol/s 8.80 sol/s 0.87 sol/s 6.80 sol/s | Total: 37.87 sol/s
Performance: 8.20 sol/s 8.40 sol/s 7.53 sol/s 7.53 sol/s 0.73 sol/s 8.13 sol/s | Total: 40.53 sol/s

What is the reason?

usually a shit riser.

[Hanty86]

Rigs 6*470 4Gb
Have problem with one card for rigs.
Performance: 7.20 sol/s 8.40 sol/s 7.93 sol/s 7.07 sol/s 0.93 sol/s 6.67 sol/s | Total: 38.20 sol/s
Performance: 7.33 sol/s 8.27 sol/s 7.80 sol/s 7.13 sol/s 1.00 sol/s 6.33 sol/s | Total: 37.87 sol/s
Performance: 7.13 sol/s 8.07 sol/s 6.20 sol/s 8.80 sol/s 0.87 sol/s 6.80 sol/s | Total: 37.87 sol/s
Performance: 8.20 sol/s 8.40 sol/s 7.53 sol/s 7.53 sol/s 0.73 sol/s 8.13 sol/s | Total: 40.53 sol/s

What is the reason?

usually a shit riser.

I not have problem with one card for every rigs when mining ETH/ETC
I think not shit riser.