Fenboy
Newbie
Offline
Activity: 84
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2020, 04:49:51 PM |
|
Hi, had my 2x Apollo’s running fine since having them. Might be changing location of the miners and have tried to remote access them/dashboard but can’t get passed the ‘Inital setup’ page. Tried iOS and Windows.
Can access them fine when on same network, but not remotely. Any clues?
Thanks
|
|
|
|
VictorGT
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2020, 05:21:58 PM |
|
someone on ebay is selling 5 futurebit Apollo miners.He is claiming that one apollo can be cranked up to 250-400 MH/s...Has anyone tried and how many watts did it draw, Probably can only run for 10 minutes?
If you really wanna crank these things each unit can go up to 250-400 MH/s with the right tuning (Experienced users only - but I can give some level of guidance).
I don't believe this, sorry. Too much overclock+overvolt. Scam seller. Max MHz Apollo UI allow is 858. This is about 144 MHS. Maybe 150, 160. No more.
|
|
|
|
estacionsj
Jr. Member
Offline
Activity: 55
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2020, 07:22:16 PM |
|
someone on ebay is selling 5 futurebit Apollo miners.He is claiming that one apollo can be cranked up to 250-400 MH/s...Has anyone tried and how many watts did it draw, Probably can only run for 10 minutes?
If you really wanna crank these things each unit can go up to 250-400 MH/s with the right tuning (Experienced users only - but I can give some level of guidance).
I don't believe this, sorry. Too much overclock+overvolt. Scam seller. Max MHz Apollo UI allow is 858. This is about 144 MHS. Maybe 150, 160. No more. Thanks for the info,
|
|
|
|
estacionsj
Jr. Member
Offline
Activity: 55
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2020, 06:09:00 AM |
|
Hey jstefanop i know this is off topic but how is the Low cost Plug and play node over WiFi with an easy to use interface! comming along
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2020, 05:01:31 PM |
|
Hey jstefanop i know this is off topic but how is the Low cost Plug and play node over WiFi with an easy to use interface! comming along
When the software is released for the Apollo there will be more details on that for obvious reasons. The hardware will essentially be the Apollo controller, and software wise it will be nearly the same as the Apollo minus the mining part. So as soon as its ready for Apollo the standalone node will be nearly ready for release.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2020, 05:05:09 PM |
|
someone on ebay is selling 5 futurebit Apollo miners.He is claiming that one apollo can be cranked up to 250-400 MH/s...Has anyone tried and how many watts did it draw, Probably can only run for 10 minutes?
If you really wanna crank these things each unit can go up to 250-400 MH/s with the right tuning (Experienced users only - but I can give some level of guidance).
I don't believe this, sorry. Too much overclock+overvolt. Scam seller. Max MHz Apollo UI allow is 858. This is about 144 MHS. Maybe 150, 160. No more. Yes that's BS...150-155 MH/s is max for the Apollo...the regulator would blow up in 10 min on anything higher.
|
|
|
|
Xena33
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/exclamation.gif) |
February 03, 2020, 07:28:31 PM |
|
Hey, I just got this Futurebit Apollo and I keep getting this error message below. I see that there have been a few people with the same problems, I've tried what I've seen and it hasn't worked. Any idea's before I just give up?
It seems there is a problem to communicate with the miner, check error message.
Error: connect ECONNREFUSED 127.0.0.1:4028
Wait at least 1 minute, if problem persists, try to restart the miner, check the settings or try to reboot the system.
|
|
|
|
estacionsj
Jr. Member
Offline
Activity: 55
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 03, 2020, 07:33:18 PM |
|
Hey, I just got this Futurebit Apollo and I keep getting this error message below. I see that there have been a few people with the same problems, I've tried what I've seen and it hasn't worked. Any idea's before I just give up?
It seems there is a problem to communicate with the miner, check error message.
Error: connect ECONNREFUSED 127.0.0.1:4028
Wait at least 1 minute, if problem persists, try to restart the miner, check the settings or try to reboot the system.
Did u get it with or without the SIM card...
|
|
|
|
Xena33
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 03, 2020, 10:07:30 PM |
|
I did purchase w/a sim card
|
|
|
|
estacionsj
Jr. Member
Offline
Activity: 55
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 09, 2020, 04:18:44 AM |
|
I did purchase w/a sim card
re-image the sd card, go to post #1
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 16, 2020, 05:41:14 PM |
|
Need a few more beta testers for the full node update. If you have a batch 2 unit and have basic terminal skills (ie can ssh into the machine and run basic commands), dm me your email address!
|
|
|
|
stephan3000
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 17, 2020, 10:57:48 AM |
|
Hi together
One of my Apollo (batch2) has some issues atm. I let them (2 pc.) run in turbo mode for about 30 days. Now one of them keeps crashing after like a few hours. The other ones continues to run without issues. Only thhing what i could see was that memory (Ram) consumption gets higher and higher. (But i am not sure if this is the reason.) Any hint what i could do, a) to find out the reason and b) to fix it.
Any help very appreciated
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4214
Merit: 8356
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 17, 2020, 01:15:14 PM |
|
I got an email if the guy is legit the email should go jstefanop
the maker of Apollo scrypt asic miner not me
"Feb 17 at 4:58 AM
C......... R...... <c......._r.....@ hotmail . com > To: phil........@ yahoo . com <phil........@ yahoo . com> Hello, My name is C....... R...... and im ceo of a Norwegian tech company (L.......). Im D...... on bitcointalk. Our company L....... has designed a new scrypt asic that beats all other scrypt machines on the marked. I really like your Apollo desktop miner and your vision for home miners and implemented node.
We do not want to produce unlimited miners and destroy the marked (like bitmain does). Our SHA-engine is BAD ASS and we can use that in our next design for sha256.
I dont know what is your future plans is.. Your Apollo miner is so great and you have put so much work into that,that we dont want to go after that marked.. Maybe we can work together.. our chip in your Apollo.
FusionSiliconX6 Power Consumption 1073 W Hashrate 0.860 GH/s Performance Proxy Gh/s/W 0.8
Bitmain L5 Power Consumption 1473 W Hashrate 1.425Gh/s Performance proxy Gh/s/W 1.03
Innosilicon A6+ Power Consumption 2100w Hashrate 2.2 Gh/s Performance Proxy Gh/s/W 1.05
L....... Power Consumption 1300w Hashrate 4.12Gh/s Performance Proxy Gh/s/W 3.17
Best Regards C....... R...... aka D........
He claim a 3x more efficient chip. So I posted a redacted version here.
I sent full version to your pm
Best regards Phil
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 18, 2020, 10:04:07 PM |
|
Hi together
One of my Apollo (batch2) has some issues atm. I let them (2 pc.) run in turbo mode for about 30 days. Now one of them keeps crashing after like a few hours. The other ones continues to run without issues. Only thhing what i could see was that memory (Ram) consumption gets higher and higher. (But i am not sure if this is the reason.) Any hint what i could do, a) to find out the reason and b) to fix it.
Any help very appreciated
Does this only happen in turbo mode? Have you tried re-imaging the SD card?
|
|
|
|
stephan3000
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2020, 12:28:04 AM |
|
Hi together
One of my Apollo (batch2) has some issues atm. I let them (2 pc.) run in turbo mode for about 30 days. Now one of them keeps crashing after like a few hours. The other ones continues to run without issues. Only thhing what i could see was that memory (Ram) consumption gets higher and higher. (But i am not sure if this is the reason.) Any hint what i could do, a) to find out the reason and b) to fix it.
Any help very appreciated
Does this only happen in turbo mode? Have you tried re-imaging the SD card? yes, so far yes. now i went into eco mode on this one, and it runs since then flawless. if you think re-imaging the SD card can help, i can try this.
|
|
|
|
mickeykool
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2020, 11:50:25 AM |
|
Since some of us have updated our apollo to ltc nodes the node counts hasn't gone up much. Not sure if site is bugged or our nodes are not synced to the network yet? https://blockchair.com/litecoin/nodesAnyone notice this? Both of my miners have the node update.
|
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2170
Merit: 2338
EIN: 82-3893490
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2020, 04:27:14 PM |
|
Since some of us have updated our apollo to ltc nodes the node counts hasn't gone up much. Not sure if site is bugged or our nodes are not synced to the network yet? https://blockchair.com/litecoin/nodesAnyone notice this? Both of my miners have the node update. mine does as well.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2020, 05:38:00 PM |
|
Since some of us have updated our apollo to ltc nodes the node counts hasn't gone up much. Not sure if site is bugged or our nodes are not synced to the network yet? https://blockchair.com/litecoin/nodesAnyone notice this? Both of my miners have the node update. Apollo nodes will only show up on the network if you have port 9333 open and incoming connections can connect to your node. The node has UPnP support built in, but might not work with all routers. You can check by your network connections count (command to check was sent in beta email), if its 8 then your port is not open, if its more than 8 you should be good. Otherwise you need to manual open port 9333 on your router and point it to your Apollos IP address in port forwarding rules in router settings. BTW please keep node discussions in beta email until the update is publicly released.
|
|
|
|
butary
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2020, 01:02:04 PM |
|
Hello,
last week I received the Apollo miners and everything works out-of-the box. My friends and colleagues at work are impressed, so we plan to make an omnibus order in the next weeks to reduce delivery coasts for Germany. The European reseller is sold-out.
One questions we have: Is stratum over tls supported?
I tried "stratum+tls" and "stratum+ssl" on litecoinpool port 3443., but only "stratum+tcp" works. Any hints are welcome.
Thanks and best regards.
|
|
|
|
|
|