[DISCONTINUED] cryp.today Mining revenue stats Scrypt Scrypt-N X11 X13

[suchmoon]

Any plans to include Wafflepool X11?

And also, a sincere thank you for doing this, and keep up the good work.

Thank you. WafflePool X11 is in the spreadsheet:

https://docs.google.com/spreadsheets/d/1VOAhFX1XRizdaTp71qnYI5pRh9VIZEQ51LHuGUmxri0/pubhtml

[suchmoon]

Charts have been updated for today. No major changes.

[edonkey]

All I can say is hurray for razorcoin! It's nice for us poor schlubs to enjoy 200+% LTC, while it lasts ;-)

[suchmoon]

All I can say is hurray for razorcoin! It's nice for us poor schlubs to enjoy 200+% LTC, while it lasts ;-)

Good point. Waffle and Clever have caught on too. So probably won't last long 

[suchmoon]

Charts have been updated for today. No major changes.

As mentioned above Scrypt is on the rise. Don't miss out if you have an ASIC, days like this will make or break your ROI

[suchmoon]

Sorry for the delay, I keep forgetting how ridiculous interwebs connections can be in some places  

Charts have been updated for today. No major changes.

Edit: X11 is - or was - doing really good today on Waffle, shows guerillacoin mined most of the time.

[suchmoon]

Charts have been updated for today. No major changes.

[Hueristic]

X13?

[suchmoon]

X13?

I'm currently tracking TMB X13 (can be found in the spreadsheet), NiceHash X13, and MiningRigRentals X13 (numbers not available yet, only started a few days ago). Will add WafflePool X13 when it's available. I'm also trying to set up multi-algo tests for NiceHash and TMB, which would include X13. It's proving to be difficult so far as none of my rigs work with sgminer v5, so some reinstallation/retuning is going to be needed. Long story short, significant changes coming soon, please bear with me.

[sk00t3r]

Any luck with adding beta.profithash.com to your charts?

[Hueristic]

X13?

I'm currently tracking TMB X13 (can be found in the spreadsheet), NiceHash X13, and MiningRigRentals X13 (numbers not available yet, only started a few days ago). Will add WafflePool X13 when it's available. I'm also trying to set up multi-algo tests for NiceHash and TMB, which would include X13. It's proving to be difficult so far as none of my rigs work with sgminer v5, so some reinstallation/retuning is going to be needed. Long story short, significant changes coming soon, please bear with me.

Very nice, I too have given up on V5 ATM. Been using nicehash x13 / x11 and just changing by 24hr rate on main page. But I like to watch your charts.

[suchmoon]

Charts have been updated for today. No major changes.

[suchmoon]

Charts have been updated for today. No major changes.

[suchmoon]

Charts have been updated for today. No major changes.

[Accordus]

Just to level the playing field if anyone missed>
https://bitcointalk.org/index.php?topic=623409.0
This is a very messy topic, but you may be able to get out latest essentials for some more speed bump for X11 and X13.
With 14.6 RC driver Gigabyte R9280x now does 4,35 MHs on X11 stable and 3,1 MHs on X13 (stability IDK).
Draws the same power as latest versions. 1450 W for 8 cards in 2 rigs.

This is different from V5 sgminer as I had spent time with it but still no luck.

[suchmoon]

Just to level the playing field if anyone missed>
https://bitcointalk.org/index.php?topic=623409.0
This is a very messy topic, but you may be able to get out latest essentials for some more speed bump for X11 and X13.
With 14.6 RC driver Gigabyte R9280x now does 4,35 MHs on X11 stable and 3,1 MHs on X13 (stability IDK).
Draws the same power as latest versions. 1450 W for 8 cards in 2 rigs.

This is different from V5 sgminer as I had spent time with it but still no luck.

Thank you for posting this. I've been keeping an eye on these developments but still haven't decided if I want to sacrifice a rig or two to try 14.6.

[Accordus]

Just to level the playing field if anyone missed>
https://bitcointalk.org/index.php?topic=623409.0
This is a very messy topic, but you may be able to get out latest essentials for some more speed bump for X11 and X13.
With 14.6 RC driver Gigabyte R9280x now does 4,35 MHs on X11 stable and 3,1 MHs on X13 (stability IDK).
Draws the same power as latest versions. 1450 W for 8 cards in 2 rigs.

This is different from V5 sgminer as I had spent time with it but still no luck.

Thank you for posting this. I've been keeping an eye on these developments but still haven't decided if I want to sacrifice a rig or two to try 14.6.

One of my rig took stupidly insane time to upgrade to 14.6.
Uninstall+Install still left 13.2 as a driver of each card (later seen in Device manager) and kept (reinstalled FFS!) the old AMD package. Yes, I used the 310MB file from AMD 14.6RC link.
Uninstall+Removing AMD folders still did the same.
Uninstall+Removing AMD folders + Ccleaner still no success.
Uninstall+Removing AMD folders + Removing many AMD references from regedit + CCleaner + Uninstalling cards one by one from Device manager did the thing.
I lost one full day almost. These installs take ages...

(My other rig conversion went smoothly to 14.6 maybe due to the reason it was perfectly upgraded (simple uninstall+install) to 14.4 few days earlier.)

[Accordus]

May be relevant. I saw this comment in "official" v5 sgminer thread:

Cgwatcher is driving me crazy! Why I can't use it with the new miner? It's overiding my settings and creates ckolivas bin instead the darkcoin bin..

I constantly had the same issue. No matter how well I did my conf file to point to the right kernel, it always used ckolivas somehow. But always tried with Cgwatcher only, never run the stuff from cmd prompt. I am now rented out for the whole day, but suchmoon this could also help you out although you never stated your type of problem with v5.

[Thenen]

Nice data, thanks for sharing.

[suchmoon]

May be relevant. I saw this comment in "official" v5 sgminer thread:

Cgwatcher is driving me crazy! Why I can't use it with the new miner? It's overiding my settings and creates ckolivas bin instead the darkcoin bin..

I constantly had the same issue. No matter how well I did my conf file to point to the right kernel, it always used ckolivas somehow. But always tried with Cgwatcher only, never run the stuff from cmd prompt. I am now rented out for the whole day, but suchmoon this could also help you out although you never stated your type of problem with v5.

I'm still on 13.12 drivers because that was the most stable version at the time I set up most of my rigs. I think v5 just doesn't work properly with 13.12, I get "Error -4: Enqueueing kernel onto command queue", tried it on a couple of different rigs. So I just need to do some testing, maybe a clean install of Windows or BAMT if there is one with 14.6 drivers.