[www.easy2mine.com] 340$, the group buy of antminer s5(psu included)

[elavenil]

Friend can you solve my problem today?
Most of the time my miner runs at 14.5mh only.
And i need some control to change the pool settings.

[pcfli]

the first batch of miners are online at our new simple data center of xuzhou(S1) with remote access to control

[notlist3d]

Having some issues with the Silverfish, either chained or not chained they seem to only stay at full speed for a very short period of time, then slow down over 4-6 hours, and then speed up again, and repeat.

Two things I can think of.  What is temperature like?  It seems to be more susceptible to heat with open air then the A2's with closed case.  With 6 in a row without extra cooling this most likely could be it.  Looking at setup of 6 pulling air from against wall so close together and no extra fan's or cooling I think this is best bet.

The firmware would be second thing to look at.  What does your second tab in the blades go to, does the performance (M) go to 14 and level there?  Old firmware seems to not level there.

Edit i should add this just so it's out there in-case anyone else needs this I didn't mention earlier as your mining experience is difficulty level.  But the difficulty level on pool needs to be set high enough to optimize the asic miner. If difficulty is to low it can cause high variance and low hash rates.

Temps are less than 55 , so not a problem. The are pulling 65f air right from an over head AC you cannot see in the pic.

Firmware is the latest, and is at '14'

Diff is set correct at the pool level.

I now have 2/6 blades showing a dead blade out of the 2, and they still do not remain hashing stable for more than a few hours.

As Mr. Lee noted up above it does seem some blades have a lower hash rate.

I have mine very cool, that personally helped me on stability. I cannot speak of dead blade, as I have not had a unit to test with that. They do tend to have a higher variance depending on blades and in my case temperature.  It is cooler then I keep the rest of my miners.  I had it pointed at clever yesterday because of pay, personally waffle I tend to get a little higher with on this SF.  But the pay was so good I used clever.

Here is pictures of one mining with very very cool air temps, in mid 40's c about 10 degree C under what you mention.  You will see it only needed restarted once in a day, I didn't catch it right away so you will see it run lower for a little bit and it did effect average and pay.  I can say personally temperature and the new firmware helped mine greatly.  

The very cool air being used is shown below:

[notlist3d]

Friend can you solve my problem today?
Most of the time my miner runs at 14.5mh only.
And i need some control to change the pool settings.

Is it detecting both blades?   Also what does your performance (m) say?  Does it go to 14 and stabilize?

[elavenil]

Friend can you solve my problem today?
Most of the time my miner runs at 14.5mh only.
And i need some control to change the pool settings.

Is it detecting both blades?   Also what does your performance (m) say?  Does it go to 14 and stabilize?

Most of the time it only one blade is working, second blade works for some time then goes down.
Please check my stats.





Also the given teamviewer username password is not working at all. I tried more than 100 times and and used 3 versions of team viewer. I am getting password is wrong error.

With the new data center is ready can i get the remote access to control.

[notlist3d]

Friend can you solve my problem today?
Most of the time my miner runs at 14.5mh only.
And i need some control to change the pool settings.

Is it detecting both blades?   Also what does your performance (m) say?  Does it go to 14 and stabilize?

Most of the time it only one blade is working, second blade works for some time then goes down.
Please check my stats.

...saving space....

Make sure you are using a psu 500 watts or above, if low quality PSU check with another.  If that does not work can you post a picture of what your silverfish miner program looks like after 30 minutes or so of mining? Please click down to where it shows blade level on each blade. (I'm wanting to see it's stats after stabilizing with pool).  If it does detect both we will look at difficulty settings next.  

[pcfli]

i will restart server, strange problem i can log in with the team view information i give to you without any issue

[elavenil]

i will restart server, strange problem i can log in with the team view information i give to you without any issue

Yeah you given me 4 passwords, last one(provided by u today) also not working. i checked it on my other computer still i am getting wrong password problem.

If you come skype i can show you.

[elavenil]

some other people also experiencing this problem in teamviewer. it is due to some bug in the software. can you please tell which version you are using? so i can try that.

http://macmanus.nl/2013/10/16/fixed-partners-password-not-accepted-in-teamviewer/

[notlist3d]

Great time to get a Dragon miner to help your hash rate soar in the sky

[Biffa]

Great time to get a Dragon miner to help your hash rate soar in the sky

I thought they were out of stock?

[vulgartrendkill]

Great time to get a Dragon miner to help your hash rate soar in the sky

I thought they were out of stock?

They restocked and have some now I believe.

[pitrol]

Iam interested for hosting.

What is meaning offline time <7h in picture Lee Group Data Center.

Per month, year?

[notlist3d]

Iam interested for hosting.

What is meaning offline time <7h in picture Lee Group Data Center.

Per month, year?

The price and offline time is both per month in that picture.

[l3sny]

They were to start mining today but  no info so far, I paid yesterday morning.

[notlist3d]

They were to start mining today but  no info so far, I paid yesterday morning.

I appolgize for any delay.  I am in a different timezone then the data center engineers and Mr. Lee.  It is very early there currently.  I would suspect PM's, Questions, etc to be answered once it's daytime there. 

I can say I know they have been hard at work with the new data center with miners, but do not have information on specific people's miners.

[philipma1957]

They were to start mining today but  no info so far, I paid yesterday morning.

I appolgize for any delay.  I am in a different timezone then the data center engineers and Mr. Lee.  It is very early there currently.  I would suspect PM's, Questions, etc to be answered once it's daytime there. 

I can say I know they have been hard at work with the new data center with miners, but do not have information on specific people's miners.

It is 6:45 pm  east coast time usa

3:45 pm west coast imd usa

and by lee in china it is 6:45 am tues day morning

 I found that he starts to answer pm's  about :

730 pm east coast =  330 pm west coast = 730 am his china time.  So about 1 more hour

[gallery2000]

I think Mr. Lee is brushing his teeth and taking a dump right now.  I hope it is not diarrhea that we have to deal with because it can cause Mr. Lee to spend more time in/on the toilet and away from his computer.

[Und3rd0g]

I think Mr. Lee is brushing his teeth and taking a dump right now.  I hope it is not diarrhea that we have to deal with because it can cause Mr. Lee to spend more time in/on the toilet and away from his computer.

Not cool.  Mr. Lee is solid.  Relax!

[notlist3d]

No need to worry.  He has always been very fair.  I imagine hes working on new data center with all those miner's he showed in picture a page ago.  Also remember time difference.  There is still lots of time in day there.