oknast
Member
Offline
Activity: 110
Merit: 10
|
|
March 15, 2014, 09:32:01 PM |
|
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread my workers are having issues after ~30 minutes as well... Can you add an other worker and try it again with the same settings ? Does it say "banned!" or are you just getting rejects ? it said me worker temporarily banned Ok, I'm currently looking into this but cannot find a clue.. other seem to not get banned at all, just a few .. could be the version of sgminer Try it with an other workername please. My worker was banned, too...
|
|
|
|
cris1987
|
|
March 15, 2014, 09:33:39 PM |
|
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
March 15, 2014, 09:37:43 PM |
|
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread my workers are having issues after ~30 minutes as well... Can you add an other worker and try it again with the same settings ? Does it say "banned!" or are you just getting rejects ? it said me worker temporarily banned Ok, I'm currently looking into this but cannot find a clue.. other seem to not get banned at all, just a few .. could be the version of sgminer Try it with an other workername please. My worker was banned, too... Yes, there is probably an issue with X11, I'm looking into this. As a work-around: Create two workers, worker.1 and worker.2 and configure sgminer to use worker.2 as a failover when worker.1 is banned. (that should work with giving multiple -o switches.
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
hrodeberht
Newbie
Offline
Activity: 10
Merit: 0
|
|
March 15, 2014, 09:38:04 PM |
|
can anyone help me out with settings for sgminer for a r9 280x?
first time mining on this algo, and -g 4 makes the drivers crash
I use linux/bamt, but the settings have equivalent parameters in windows { "pools" : [ { "url" : "stratum+tcp://hiro.suprnova.cc:3313", "user" : "xxx.1", "pass" : "x" } ] , "intensity" : "18", "api-listen" : true, "api-allow" : "W:127.0.0.1", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "shaders" : "2048", "gpu-engine" : "300-1050", "gpu-fan" : "20-40", "gpu-memclock" : "1500", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "1.162", "temp-cutoff" : "85", "temp-overheat" : "82", "temp-target" : "78", "auto-fan" : true, "failover-only" : true, "expiry" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "hotplug" : "5", "log" : "5", "queue" : "0", "scan-time" : "1", "kernel" : "darkcoin", "scrypt" : false, "temp-hysteresis" : "3" } thread concurrency i got autodetect, the value is 10240 I dont know if this is good, i have sharerate around 2 Mhash/s and WU is 0.028 to 0.030 Mhash/s. Have someone better values?
|
|
|
|
blandana
Jr. Member
Offline
Activity: 209
Merit: 5
|
|
March 15, 2014, 09:38:19 PM |
|
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
NOoooooooooooooOOOOOOoooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo!!!!
|
|
|
|
Speedie
|
|
March 15, 2014, 09:39:46 PM |
|
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
Diff will be adjusted by KGW after block 15,000 Reading isn't really your thing is it? Still waiting on the apology to hrodeberht for calling him a thief when you were (once again) completely misinformed.
|
|
|
|
cris1987
|
|
March 15, 2014, 09:42:31 PM |
|
12718 blocks in 2 days? thats not 60 sec per block at all, there is premine, and the blocks are being generated per 6 seconds not 60, this coin is scam
12818 blocks, the time is there and do the maths, this coin's time per block is fake, 12 sec per block is the real time, im out, dont want to be in a scam coin anymore why u think blockchain isn't posted?
|
|
|
|
mmihai1978
|
|
March 15, 2014, 09:43:16 PM |
|
your comments are wrong.
did you read the ann? KGW @ BLOCK 15,000.
There's no diff re-targeting based on block time until then.
|
|
|
|
HiroS (OP)
|
|
March 15, 2014, 09:43:36 PM |
|
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
NOoooooooooooooOOOOOOoooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo!!!! No premine, check the time for block 1. First 15,000 blocks are not covered by KGW which equates for 0.8% of all Hirocoin distributed once KGW starts working. You need to get some coins out to people to get a coin started and 0.8% between launch and block 15,000 is modest.
|
|
|
|
phm
Full Member
Offline
Activity: 378
Merit: 110
DATABLOCKCHAIN.IO SALE IS LIVE | MVP @ DBC.IO
|
|
March 15, 2014, 09:45:06 PM |
|
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
Are you trolling or something? Every coin does that during launch...
|
|
|
|
cris1987
|
|
March 15, 2014, 09:45:54 PM |
|
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
NOoooooooooooooOOOOOOoooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo!!!! No premine, check the time for block 1. First 15,000 blocks are not covered by KGW which equates for 0.8% of all Hirocoin distributed once KGW starts working. You need to get some coins out to people to get a coin started and 0.8% is modest. 0.8% and he said no premine, god, another chinnesse coin, this coin could be good, but no, is another scam
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
March 15, 2014, 09:46:55 PM |
|
also got banned worker, after half hour
Maybe we should start to compare version numbers of sgminer.. I'm aware that the dev made some change to one of the later branches which introduces this problem.. Invalid shares after some time.. They were discussing in the sgminer thread over it, I just did not follow the conversation. Maybe someone will find it and could post a link here from the sgminer thread my workers are having issues after ~30 minutes as well... Can you add an other worker and try it again with the same settings ? Does it say "banned!" or are you just getting rejects ? it said me worker temporarily banned Ok, I'm currently looking into this but cannot find a clue.. other seem to not get banned at all, just a few .. could be the version of sgminer Try it with an other workername please. My worker was banned, too... Yes, there is probably an issue with X11, I'm looking into this. As a work-around: Create two workers, worker.1 and worker.2 and configure sgminer to use worker.2 as a failover when worker.1 is banned. (that should work with giving multiple -o switches. Aaah, I think I've found it, it was a problem with the difficulty.. Invalids were counted 1024 times more than they should So if you even sent 1 invalid, the pool thought you sent 1024... which than made it ban you It is fixed now, so no false positives should be banned anymore, sorry guys !
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
nexus2k14
|
|
March 15, 2014, 09:48:48 PM |
|
https://hiro.suprnova.cc/ - pool works flawlessly, show exact my hashrate : 2,852.13 KH/s -> please don't forget to donate 1% to pool owner <-
|
|
|
|
blandana
Jr. Member
Offline
Activity: 209
Merit: 5
|
|
March 15, 2014, 09:49:25 PM |
|
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
NOoooooooooooooOOOOOOoooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo!!!! No premine, check the time for block 1. First 15,000 blocks are not covered by KGW which equates for 0.8% of all Hirocoin distributed once KGW starts working. You need to get some coins out to people to get a coin started and 0.8% is modest. 0.8% and he said no premine, god, another chinnesse coin, this coin could be good, but no, is another scam don't feed the trolls guys!
|
|
|
|
adjed
|
|
March 15, 2014, 09:53:36 PM |
|
https://hiro.suprnova.cc/ - pool works flawlessly, show exact my hashrate : 2,852.13 KH/s -> please don't forget to donate 1% to pool owner <- Everything is working fine for me too! Nothing like thttp://benchcryptopools.myvnc.com what a scam...
|
|
|
|
Speedie
|
|
March 15, 2014, 09:53:45 PM |
|
12792 blocks, in 15 minutes, 80 blocks, 400 coin per block, do the maths, 32000 HIRO in 15 minutes, 12 sec per block is the real time per block, 5 times faster than '' dev'' say
NOoooooooooooooOOOOOOoooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo!!!! No premine, check the time for block 1. First 15,000 blocks are not covered by KGW which equates for 0.8% of all Hirocoin distributed once KGW starts working. You need to get some coins out to people to get a coin started and 0.8% is modest. 0.8% and he said no premine, god, another chinnesse coin, this coin could be good, but no, is another scam You're either the most transparent troll ever, or seriously dense. Not sure those are mutually exclusive, but still. Let's try this in small words. - KGW will kick in at block 15,000 - By block 15,000 only 0.8% of all the HIC that will eventually be mined will have been generated - Mining is open to everyone - It is not yet block 15,000 and won't be for some time - Conclusion: the 0.8% is being mined on the network Unless miners being able to mine coins is somehow a pre-mine in your world, then congratulations, you have managed to uphold your staggeringly high ratio of stupidity / post.
|
|
|
|
HiroS (OP)
|
|
March 15, 2014, 09:54:01 PM |
|
No premine, check the time for block 1. First 15,000 blocks are not covered by KGW which equates for 0.8% of all Hirocoin distributed once KGW starts working. You need to get some coins out to people to get a coin started and 0.8% is modest.
0.8% and he said no premine, god, another chinnesse coin, this coin could be good, but no, is another scam No coins were mined before launch just to be absolutely clear. Do not worry, the markets take care of these things. If the coin is too abundant then the price will be lower, if scarce the price is higher. Take a look at the effort that has gone into this release which is mentioned in the first post, the source and commit history is on GitHub for you to look at. I am going to keep maintaining and working on this coin, it is exciting times
|
|
|
|
Brewins
Legendary
Offline
Activity: 1120
Merit: 1000
|
|
March 15, 2014, 09:57:07 PM |
|
can anyone help me out with settings for sgminer for a r9 280x?
first time mining on this algo, and -g 4 makes the drivers crash
nah doesnt seem to work, only getting a total of 1mh/s with 2 r9 280x's I use linux/bamt, but the settings have equivalent parameters in windows { "pools" : [ { "url" : "stratum+tcp://hiro.suprnova.cc:3313", "user" : "xxx.1", "pass" : "x" } ] , "intensity" : "18", "api-listen" : true, "api-allow" : "W:127.0.0.1", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "shaders" : "2048", "gpu-engine" : "300-1050", "gpu-fan" : "20-40", "gpu-memclock" : "1500", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "1.162", "temp-cutoff" : "85", "temp-overheat" : "82", "temp-target" : "78", "auto-fan" : true, "failover-only" : true, "expiry" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "hotplug" : "5", "log" : "5", "queue" : "0", "scan-time" : "1", "kernel" : "darkcoin", "scrypt" : false, "temp-hysteresis" : "3" } thread concurrency i got autodetect, the value is 10240 I dont know if this is good, i have sharerate around 2 Mhash/s and WU is 0.028 to 0.030 Mhash/s. Have someone better values?
|
|
|
|
vlax352
Member
Offline
Activity: 95
Merit: 10
|
|
March 15, 2014, 09:58:45 PM |
|
Sorry guys i wasnt at my pc at the time, and didnt realise share exploit on time. i used patched stratum code now, so it should be no more exploiters on our pool... again, im sorry, i created pool, and i had some other duties, it wouldnt cross my mind that someone could use exploits on that way...
|
|
|
|
child_harold
|
|
March 15, 2014, 10:03:21 PM |
|
Is there a compiled wallet for OSX please? Th download provided only offers a zipped directory. Thanks.
|
|
|
|
|