noise23
Legendary
Offline
Activity: 968
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2014, 11:28:04 PM |
|
Just installed LAG3355_12-RC10d.bin - it still does not work with many pools. fr.hbn.theblocksfactory.com:3336 , hbn.stratum.smartmining.net:17373 and many others just give all rejects, 0% shares accepted. Actually this firmware does not work with the most of the pools I use ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Well I don't know why it happens, but it would help if you send me the log contents. Here is a partial log, the rest of the log is just the same - [2014-04-13 23:12:3.091] 0: GC3355 chip mining thread started, in SINGLE mode [2014-04-13 23:12:3.092] 0: open device /dev/ttyACM0 [2014-04-13 23:12:3.093] Starting Stratum on stratum+tcp://fr.hbn.theblocksfactory.com:3336 [2014-04-13 23:12:3.097] 0: Open UART device /dev/ttyACM0 [2014-04-13 23:12:3.179] 0@0: Set GC3355 core frequency to 850Mhz [2014-04-13 23:12:3.189] 0@1: Set GC3355 core frequency to 850Mhz .................. .................. [2014-04-13 23:14:22.006] New job_id: 3c4c Diff: 64 [2014-04-13 23:14:22.006] Stratum detected new block [2014-04-13 23:14:22.008] 7: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.013] 8: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.025] 0: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.028] 3: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.045] 5: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.045] 6: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.046] 4: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.053] 2: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.076] 9: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.083] 10: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.100] 1: Dispatching new work to GC3355 LTC core [2014-04-13 23:14:23.328] 4@0 850MHz: Got nonce 0000412e, Hash <= Htarget! [2014-04-13 23:14:23.422] 4: rejected 0/148 (0.00%) 361.1/3829.5 KH/s [2014-04-13 23:14:23.422] DEBUG: reject reason: 'above_count' [2014-04-13 23:14:23.625] 4@2 850MHz: Got nonce 6666fa12, Hash <= Htarget! [2014-04-13 23:14:23.731] 4: rejected 0/149 (0.00%) 361.2/3829.6 KH/s [2014-04-13 23:14:23.731] DEBUG: reject reason: 'above_count' [2014-04-13 23:14:23.952] 10@0 850MHz: Got nonce 0000e6a2, Hash <= Htarget! [2014-04-13 23:14:23.993] 9@1 850MHz: Got nonce 333426c6, Hash <= Htarget! [2014-04-13 23:14:24.046] 10: rejected 0/150 (0.00%) 360.9/3829.7 KH/s [2014-04-13 23:14:24.046] DEBUG: reject reason: 'above_count' [2014-04-13 23:14:24.088] 9: rejected 0/151 (0.00%) 361.7/3829.7 KH/s [2014-04-13 23:14:24.088] DEBUG: reject reason: 'above_count'
|
|
|
|
sandor111 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2014, 11:39:07 PM |
|
Honestly no idea what that error means, maybe the pool operator can help...
|
|
|
|
noise23
Legendary
Offline
Activity: 968
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2014, 11:53:36 PM |
|
Honestly no idea what that error means, maybe the pool operator can help...
OK, thanks for your time. Not a big deal anyway, now I run Gridseeds with these pools via Raspberry Pi, cgminer works good with them.
|
|
|
|
simon66
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 04:14:15 AM |
|
I'm a bit confused with the Tp-link WR703N. Does it serve as a "PC" where I just connect my units to it and access the TP-LINK panel from my other home computer (Of course I'm assuming both are connected to the same network).
Thanks!
|
|
|
|
li_gangyi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 04:26:00 AM |
|
Anyways just to let you guys know. I have successfully used the serial TTL and terminal + TFTP method to restore a bricked controller. Upload the v1 image in 1st and then from there the actual V3 firmware itself. If you get stuck doing that, do post where you are at.
|
|
|
|
amix
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 02:17:19 PM |
|
brincked tp link, unbricked it, installed openwrt, install v1 it hang, start again, install via serial console (v1) same again. after installing v1 i cant get into it. whats its default IP address, as the tp link default dont work! ive the TP link plug into spare eternet port on the pc so its not connected to the router yet, and even when i do connect it to the router its not recongisned so doesnt get assigned an ip.
|
|
|
|
sandor111 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 02:32:38 PM Last edit: April 14, 2014, 03:47:33 PM by sandor111 |
|
brincked tp link, unbricked it, installed openwrt, install v1 it hang, start again, install via serial console (v1) same again. after installing v1 i cant get into it. whats its default IP address, as the tp link default dont work! ive the TP link plug into spare eternet port on the pc so its not connected to the router yet, and even when i do connect it to the router its not recongisned so doesnt get assigned an ip.
By default it lets the router assign an IP by DHCP.
|
|
|
|
amix
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 02:49:21 PM |
|
brincked tp link, unbricked it, installed openwrt, install v1 it hang, start again, install via serial console (v1) same again. after installing v1 i cant get into it. whats its default IP address, as the tp link default dont work! ive the TP link plug into spare eternet port on the pc so its not connected to the router yet, and even when i do connect it to the router its not recongisned so doesnt get assigned an ip.
By default it let's the router assign an IP by DHCP. Thanks just did a reset and plugged it into the router , then had to dig about in my router settings - darn thing doesnt support openwrt ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) - through process of elimation manage to find it, its now uploading the firmware oohhhh
|
|
|
|
amix
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 04:24:02 PM |
|
any chance of being able to change the time zone? would be really nice and alot more convient to have the local time zone. And i think itd be reasonable - especailly as it contected to the net, to be able to change the login details. in fact have a login fullstop. someone starts probing the networks and itll only be a sort time before someone gains access to the tp link or whatever else, you come back to find your mining for someone else! Bit of security and peace of mind please.
|
|
|
|
amix
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 06:04:20 PM |
|
get some errors the grid wont hash! [2014-04-14 18:01:50] USB bus not found, try to open the USB controller power [2014-04-14 18:02:00] New miner device(s) found: 8D#########4 (ACM0) [2014-04-14 18:02:00] LTC process shutdown done power cycle of tp link and gridseeds of every possible combo no joy ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
sandor111 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 06:14:56 PM |
|
get some errors the grid wont hash! [2014-04-14 18:01:50] USB bus not found, try to open the USB controller power [2014-04-14 18:02:00] New miner device(s) found: 8D#########4 (ACM0) [2014-04-14 18:02:00] LTC process shutdown done power cycle of tp link and gridseeds of every possible combo no joy ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I don't see anything unusual, are they 'running'? Can you post the miner log?
|
|
|
|
Louste
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 06:20:42 PM |
|
Quick, someone port this over to rPi!
Have ported V1 LightningAsic wiibox to PI (works quite well!) does anyone know how i can access v3 703n they seem to have removed all ways of telnet, SSH and even removed serial console access!
|
|
|
|
sandor111 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 06:47:32 PM |
|
Quick, someone port this over to rPi!
Have ported V1 LightningAsic wiibox to PI (works quite well!) does anyone know how i can access v3 703n they seem to have removed all ways of telnet, SSH and even removed serial console access! Simple answer, you can't.
|
|
|
|
Xer0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 07:01:27 PM |
|
"Firmware with name 'LAG3355_12-RC10d' is not found"
tried with Chrome, IE and Firefox on a Windows XP PC
anyone has the RC10c?
|
|
|
|
|
amix
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 07:29:48 PM |
|
get some errors the grid wont hash! [2014-04-14 18:01:50] USB bus not found, try to open the USB controller power [2014-04-14 18:02:00] New miner device(s) found: 8D#########4 (ACM0) [2014-04-14 18:02:00] LTC process shutdown done power cycle of tp link and gridseeds of every possible combo no joy ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I don't see anything unusual, are they 'running'? Can you post the miner log? its not running! only the green led lights up, the red doesnt flash at all. pool hash rate shows zero to. the miner log is empty. nothing zip nada zizch.
|
|
|
|
amix
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 07:32:10 PM |
|
just a quick question is the auto overclocking feature a part of the "firmware" or is it part of the miner software thats part of the frimware -cpuminer is it? and if its the miner ie cpuminer/cgiminer (whichever one it is) can we run that as a standlone or does it need the firmware to run?
|
|
|
|
sandor111 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 07:35:21 PM |
|
just a quick question is the auto overclocking feature a part of the "firmware" or is it part of the miner software thats part of the frimware -cpuminer is it? and if its the miner ie cpuminer/cgiminer (whichever one it is) can we run that as a standlone or does it need the firmware to run?
Part of cpuminer, the link to github sources is somewhere in this thread. Btw, can you post a screen with the web interface fully visible?
|
|
|
|
amix
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 08:22:34 PM |
|
just a quick question is the auto overclocking feature a part of the "firmware" or is it part of the miner software thats part of the frimware -cpuminer is it? and if its the miner ie cpuminer/cgiminer (whichever one it is) can we run that as a standlone or does it need the firmware to run?
Part of cpuminer, the link to github sources is somewhere in this thread. Btw, can you post a screen with the web interface fully visible? thanks yeah i seen the link and refound it. So in theory i could use openwrt on the tp link and complie cpuminer to run on it? only i wouldnt have the nice graphical user interface?. screenshot : ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi297.photobucket.com%2Falbums%2Fmm227%2Felleros%2Fgridasic.jpg&t=665&c=J4kwfMV-4H49bQ) did post one of the miner log as its empty nothing : ie : Tailing file: /tmp/log/ltc.log | Grep keyword: "" | Inverted: false and thats it nothign beloew that line.
|
|
|
|
Xer0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 14, 2014, 08:36:21 PM |
|
did not work too, until i plugged the box into our router, so it has internet too
|
|
|
|
|