LightningAsic Gridseed Controller Firmware V3

[one4many]

Hey Sandor111,

this might be a stupid question. But I don't see dual mining support (scrypt / sha256), is this feature missing intentionally or still coming?

Cheers

    one4many

[1715059905]

1715059905

[1715059905]

1715059905

[1715059905]

1715059905

[Xer0]

it's gone from v3

[Kapz786]

Hey Sandor111,

this might be a stupid question. But I don't see dual mining support (scrypt / sha256), is this feature missing intentionally or still coming?

Cheers

    one4many

That was always the intention

[wasubii]

Had my 60 GS's running nicely on three RasPi's running Scripta - nice and solid. But decided to give this software a go, seeing as i have these LA controllers just lying around and I'm curious about the auto tune facility.

I upgraded 2pcs LA controller V1 and 4pcs LA controller V2 successfully. No bricks.

Some of the V2 controllers needed to use the V1 'prep' firmware before upgrading, but obviously i tried V2 first and when that failed i successfully used V1. None of them needed to be power cycled - they all rebooted themselves after a little while.

I am now running 10 units per controller with each 10 on a single 12V USB hub (supplied by Jack with the kit)

I've started at 800MHz on auto tune - lets see how it goes!!

Looking forward to a future fw update that will control the individual chip frequencies!!

[asiabtc]

spec upgrade.A2 chipset can run more fast.
Great 75MHS Scrypt Rack Miner Pre-order.
got better price of chips. and price adjusted.
64MHS, 450W.
28nm Chiset.
ship out before May 20th.
LA75M - 9999 USD <including all accessories + DHL express shipping>

15MHS Scrypt Blade Pre-order.
15MHS, 110W.
28nm Chiset.
ship out before May 20th.
LA12M - 3000 USD <including all accessories + DHL express shipping>

Scrypt Miner based on GC3355 stopped production.)


LA1THS, 1000W
1000GHS,
18KG.
rack case.
USD2899, <including all accessories + DHL express shipping>

[li_gangyi]

Had my 60 GS's running nicely on three RasPi's running Scripta - nice and solid. But decided to give this software a go, seeing as i have these LA controllers just lying around and I'm curious about the auto tune facility.

I upgraded 2pcs LA controller V1 and 4pcs LA controller V2 successfully. No bricks.

Some of the V2 controllers needed to use the V1 'prep' firmware before upgrading, but obviously i tried V2 first and when that failed i successfully used V1. None of them needed to be power cycled - they all rebooted themselves after a little while.

I am now running 10 units per controller with each 10 on a single 12V USB hub (supplied by Jack with the kit)

I've started at 800MHz on auto tune - lets see how it goes!!

Looking forward to a future fw update that will control the individual chip frequencies!!

The current firmware I believe already does individual chip freqs.

[sandor111]

Had my 60 GS's running nicely on three RasPi's running Scripta - nice and solid. But decided to give this software a go, seeing as i have these LA controllers just lying around and I'm curious about the auto tune facility.

I upgraded 2pcs LA controller V1 and 4pcs LA controller V2 successfully. No bricks.

Some of the V2 controllers needed to use the V1 'prep' firmware before upgrading, but obviously i tried V2 first and when that failed i successfully used V1. None of them needed to be power cycled - they all rebooted themselves after a little while.

I am now running 10 units per controller with each 10 on a single 12V USB hub (supplied by Jack with the kit)

I've started at 800MHz on auto tune - lets see how it goes!!

Looking forward to a future fw update that will control the individual chip frequencies!!

The current firmware I believe already does individual chip freqs.

I believe he means the option to set the frequency specific to a chip, which I have yet to implement.

[asiabtc]

LA60M spec upgrade to 75M, 600W.
price is same: usd9999.

[sandor111]

Cpuminer update
Support for individual chip frequency is added. It’s possible to run regular USB miners and G-Blades on a single instance, because the number of chips is now auto detected.
This means that I will be working on building a new bin image, so that is possible to run G-Blades on and set frequencies specific to the chip.

[poopypants]

Cpuminer update
Support for individual chip frequency is added. It’s possible to run regular USB miners and G-Blades on a single instance, because the number of chips is now auto detected.
This means that I will be working on building a new bin image, so that is possible to run G-Blades on and set frequencies specific to the chip.

This is for the linux / windows correct?  Is openwrt update imminent?

[Xer0]

besides, can a LA flashed WR703N be reverted to Stock/OpenWRT later?

[fhh]

for mining yes, but not for flashing

You also need internet for flashing.
Before upgrading it checks this url: http://www.lightningasic.com/firmware/md5/md5.txt

lighningasic.com seems to be down so I can't flash the RC10g firmware:(

[Xer0]

for mining yes, but not for flashing

You also need internet for flashing.
Before upgrading it checks this url: http://www.lightningasic.com/firmware/md5/md5.txt

lighningasic.com seems to be down so I can't flash the RC10g firmware:(

do you have SSH on your Router?
put a webserver on your pc holding that file
and map the ip to their domain in the hosts file

[marunga]

...or install a webserver on your PC and direct their site to the PC itself.
edit C:\Windows\System32\drivers\etc\hosts and add the new domain/IP:

127.0.0.1      domain.com
127.0.0.1      www.domain.com

No need to have a router with ssh

regards,
m

edit:  Xer0 is right...this won't work. You must have some device that redirects the traffic from the tp-link to the PC with the webserver.

[fhh]

website is back md5.txt file still missing
whats the content of the file?
yjust the md5sum of the firmware?

[sandor111]

website is back md5.txt file still missing
whats the content of the file?
yjust the md5sum of the firmware?

I have notified Jack about it.
Contents are of format "name_1:md5_1,name_2,md5_2,..."

[Xer0]

...or install a webserver on your PC and direct their site to the PC itself.
edit C:\Windows\System32\drivers\etc\hosts and add the new domain/IP:

127.0.0.1      domain.com
127.0.0.1      www.domain.com

No need to have a router with ssh

regards,
m

than wont work
the router is connecting to the site, not your browser/pc

except you have it on lan2 and bridge your wan with it
but never saw working bridge or internet commection sharing on windows ^^

[sandor111]

md5.txt is reuploaded.

[christian1980]

Did someone succesfully use Lightningasic with a wallet for solomning in the local LAN?
I am always getting Segmentation fault if i try to mine for example http://192.168.0.175:10708

Maybe its a Bug, Sandor?

[dloganbill]

I just got this loaded and don't have much experience with it yet.  What does this mean from the log?

DEBUG: reject reason: Invalid extranonce2 size.

I'm getting a lot of them while mining at Nicehash.