Claymore XPM GPU Miner discussion

[antonio8]

Can i run 2 cards with 1 bat on SOLO?

The miner says GPU Device: 1

I have this in my bat: di 1,2 -ss 0 -t 4 -sd 0 -hc 512

[jollyriffic]

Can i run 2 cards with 1 bat on SOLO?

The miner says GPU Device: 1

I have this in my bat: di 1,2 -ss 0 -t 4 -sd 0 -hc 512

he previously said to run each card on its own bat. so i'm guessing its not supported

[Judgment]

Bah I'm confused with the nodes thing.

Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?

Here's the peerinfo from debug window: http://tny.cz/ce42f425

I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"

Edit: here's the getpeerinfo with port closed, very different looking peers: http://tny.cz/2ecf7789

[jollyriffic]

Bah I'm confused with the nodes thing.

Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?

Here's the peerinfo from debug window: http://tny.cz/ce42f425

I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"

same here, i had 21 connections before i added the nodes.
i didnt do anything with my router.
now i'm down to 9 connections

[ozzy1926]

Bah I'm confused with the nodes thing.

Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?

Here's the peerinfo from debug window: http://tny.cz/ce42f425

I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"

i think we should know the exact port number

edit:what ever i try i couldnt pass 8

[irritant]

Bah I'm confused with the nodes thing.

Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?

Here's the peerinfo from debug window: http://tny.cz/ce42f425

I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"

i think we should know the exact port number

edit:what ever i try i couldnt pass 8

you have to forward the port that primecoin wallet uses (when upnp doesnt work)

[SpeedDemon13]

How's everyone's results with the solo miner? (Per card model and setup)

[slimdim]

2*280x cards

Estimated CPD:  1.6543, Average CPD:  0.0000, Mining time: 00:23
Estimated CPD:  1.2546, Average CPD:  0.0000, Mining time: 00:23

 ch/h 4:  120922
 ch/h 4:  120416

sieve: 179, fermat: 147, total: 358   Total Round Time (TRT): 358
sieve: 180, fermat: 150, total: 364   Total Round Time (TRT): 364

and 8 active connections....it is impossible to make more

[Strannik-74]

2x280X MSI
══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 12:55:18 2014
New Block: 505202 - Current Diff: 10.810872
Total/Valid shares: [ 560 / 539 ]  -  Max diff: 9.337728
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   795K] [    515] [     43] [      2] [      0] [      0] [      0]
  ch/h: [ 143722] [ 93.096] [  7.773] [  0.362] [  0.000] [  0.000] [  0.000]
Estimated CPD:  1.6051, Average CPD:  0.0000, Mining time: 05:31
══════════════════════════════════════════════════════════════════════════════

══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 13:02:34 2014
New Block: 505213 - Current Diff: 10.810956
Total/Valid shares: [ 606 / 586 ]  -  Max diff: 10.924097
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   816K] [    558] [     42] [      4] [      2] [      0] [      0]
  ch/h: [ 143981] [ 98.402] [  7.407] [  0.705] [  0.353] [  0.000] [  0.000]
Estimated CPD:  1.6966, Average CPD:  8.4647, Mining time: 05:40
══════════════════════════════════════════════════════════════════════════════

[slimdim]

2x280X MSI
══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 12:55:18 2014
New Block: 505202 - Current Diff: 10.810872
Total/Valid shares: [ 560 / 539 ]  -  Max diff: 9.337728
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   795K] [    515] [     43] [      2] [      0] [      0] [      0]
  ch/h: [ 143722] [ 93.096] [  7.773] [  0.362] [  0.000] [  0.000] [  0.000]
Estimated CPD:  1.6051, Average CPD:  0.0000, Mining time: 05:31
══════════════════════════════════════════════════════════════════════════════

══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 13:02:34 2014
New Block: 505213 - Current Diff: 10.810956
Total/Valid shares: [ 606 / 586 ]  -  Max diff: 10.924097
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   816K] [    558] [     42] [      4] [      2] [      0] [      0]
  ch/h: [ 143981] [ 98.402] [  7.407] [  0.705] [  0.353] [  0.000] [  0.000]
Estimated CPD:  1.6966, Average CPD:  8.4647, Mining time: 05:40
══════════════════════════════════════════════════════════════════════════════

asked solo data)
(пpocили coлo дaнныe ) =)))

[Strannik-74]

5x7950 Solo

(5x7950 Coлo) =))

[ozzy1926]

Bah I'm confused with the nodes thing.

Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?

Here's the peerinfo from debug window: http://tny.cz/ce42f425

I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"

i think we should know the exact port number

edit:what ever i try i couldnt pass 8

you have to forward the port that primecoin wallet uses (when upnp doesnt work)

whats theport number that primecoin wallet uses?

[triton0550]

R9 290X Tri-x OC

sieve: 124, fermat: 77, total: 228   Total Round Time (TRT): 228
sieve: 123, fermat: 78, total: 220   Total Round Time (TRT): 220

══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 11:27:05 2014
New Block: 505235 - Current Diff: 10.810908
Total/Valid blocks: [ 0 / 0 ]  -  Max diff: 10.540777
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   283K] [    201] [     22] [      1] [      1] [      0] [      0]
  ch/h: [ 209187] [148.437] [ 16.247] [  0.738] [  0.738] [  0.000] [  0.000]
Estimated CPD:  2.5593, Average CPD: 17.7238, Mining time: 01:21
══════════════════════════════════════════════════════════════════════════════

[primer10]

turn on upnp in your router, the wallet should make use of upnp to forward the incoming connections automatically.
If that doesn't work to increase your connection count, you could do manual forwarding but I suspect it may not help much...

@Slimdim, Claymore did say solo and pool similar results

[amartinz]

I think the gpu-miner should have a feature to choose chain length for solo-mining. Finding 7ch, 8ch, 9ch is useless. We need only 10ch for solo.

[aistto]

readme says -ss 1 and 2 available
-ss 0 disalable for miner v3.0?

what about -t ? any advice to use it? (6 GPU on athlone x2 x250)

[Claymore]

readme says -ss 1 and 2 available
-ss 0 disalable for miner v3.0?

what about -t ? any advice to use it? (6 GPU on athlone x2 x250)

Try "-ss 2 -t 8" if your CPU is slow. It's a good idea to test different values and see changes in 4ch/h.

[primer10]

I think the gpu-miner should have a feature to choose chain length for solo-mining. Finding 7ch, 8ch, 9ch is useless. We need only 10ch for solo.

sub 10 chains are byproduct. you need to test for them before testing 10.

[ozzy1926]

readme says -ss 1 and 2 available
-ss 0 disalable for miner v3.0?

what about -t ? any advice to use it? (6 GPU on athlone x2 x250)

Try "-ss 2 -t 8" if your CPU is slow. It's a good idea to test different values and see changes in 4ch/h.

is there any guide to increase the wallet connection up from 8?

[aistto]

readme says -ss 1 and 2 available
-ss 0 disalable for miner v3.0?

what about -t ? any advice to use it? (6 GPU on athlone x2 x250)

Try "-ss 2 -t 8" if your CPU is slow. It's a good idea to test different values and see changes in 4ch/h.

Thanks, but I want to know about incriment increment of -t