XPM-guru
Newbie
Offline
Activity: 44
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 06, 2014, 04:14:24 PM |
|
Claymore, are you going to speed things up more?
|
|
|
|
Claymore
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 06, 2014, 04:38:42 PM |
|
Claymore, are you going to speed things up more?
Yes, of course! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
nosaer
Newbie
Offline
Activity: 38
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 06, 2014, 04:57:15 PM |
|
hello
what im doing wrong?
1 rig
2x280x Asus C2T - 3.2 CPD after 14h of run ( average) 1x280x vapor-x - 0.0 CPD after 14h of run ( avarage) CPU G3320
2 rig
2x208x Vapor-x 0.0 CPD after 11h of run ( avarage) CPU G860
setting in .bat file
color 02 setx GPU_MAX_ALLOC_PERCENT 100 NsXpmMiner.exe -o ypool.net -u random -p superhardpass -di 2 -hc 256
why have all Vapor-x 0.0 CPD avarage ( estimated is 1,86) and card found some share.
thanks
I have noticed that the Average CPD figure doesn't show up unless you hit 10chs. Either way, i ignore the Estimated / Average CPD. Your most important indicator of relative card performance is the 4ch figure. It does not directly indicate profitability, but it does indicate if your card is running at "max RPM" if you will. Also, you should also be running with -ss 2 (lowest CPU load) as you are not running with quads and you do have multiple cards. It is always best to keep CPU load under 75% with this miner. both CPU is load under 62% i'm gonna change all Vapor-x card and my power consumption is less opposite mine all others coins from 900W on 580W on same rig
|
|
|
|
atp1916
Legendary
Offline
Activity: 854
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 06, 2014, 07:45:24 PM |
|
I have a 30% energy savings going from Scrypt to XPM on every single rig i have running. I can do 5 290s at full speed on a single 1500w supply now. It's awesome ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
gilad215
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 06, 2014, 07:53:40 PM |
|
I have a 30% energy savings going from Scrypt to XPM on every single rig i have running. I can do 5 290s at full speed on a single 1500w supply now. It's awesome ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ITS AWESOME! and its even more awsome because the temps are much lower! summer started here in israel and on scrypt with fans my rigs went up to 90c. with xpm is below 80c! v7.0 to the moon
|
Neluns ♦ New Generation Financial Ecosystem ♦ Pre-sale on Aug, 1
|
|
|
|
XPM-guru
Newbie
Offline
Activity: 44
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 08:45:17 AM |
|
Great! Now its faster than Claymore miner and perhaps ypool loses some customers. fingers crossed.
|
|
|
|
Claymore
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 12:10:28 PM |
|
v7.0 is available:
- Improved speed by 5-15% (depends on card type). Up to 4.2 CPD on 290X. - Reduced number of invalid shares. - Faster estimation of CPD value. - Improved stability for high "-hc" values, 1024 by default for 290/290X.
Next version will be a major update with much better mining speed.
|
|
|
|
Strannik-74
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 01:14:56 PM |
|
v 6.0 v 7.0 280X 189k 4ch & TRT 250 -> 205k 4ch & TRT 230 + 8% 7950 146k 4ch & TRT 323 -> 163k 4ch & TRT 290 +11% 270X 115k 4ch & TRT 420 -> 124k 4ch & TRT 384 + 8% 7850 85k 4ch & TRT 544 -> 91k 4ch & TRT 514 + 7%
|
|
|
|
Atma-n
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 01:53:22 PM |
|
v 6.0 v 7.0 280X 189k 4ch & TRT 250 -> 205k 4ch & TRT 230 + 8% 7950 146k 4ch & TRT 323 -> 163k 4ch & TRT 290 +11% 270X 115k 4ch & TRT 420 -> 124k 4ch & TRT 384 + 8% 7850 85k 4ch & TRT 544 -> 91k 4ch & TRT 514 + 7%
At what speed do you run your cards (especially 280x)?
|
|
|
|
primer10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 02:07:53 PM |
|
v7.0 is available:
- Improved speed by 5-15% (depends on card type). Up to 4.2 CPD on 290X. - Reduced number of invalid shares. - Faster estimation of CPD value. - Improved stability for high "-hc" values, 1024 by default for 290/290X.
Next version will be a major update with much better mining speed.
I don't use it but why not just update to the fastest already. Getting harder to believe the algo/method can be tweaked multiple times with improvements.. Starting to be like intentionally weakened releases.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 02:11:53 PM |
|
v7.0 is available:
- Improved speed by 5-15% (depends on card type). Up to 4.2 CPD on 290X. - Reduced number of invalid shares. - Faster estimation of CPD value. - Improved stability for high "-hc" values, 1024 by default for 290/290X.
Next version will be a major update with much better mining speed.
I don't use it but why not just update to the fastest already. Getting harder to believe the algo/method can be tweaked multiple times with improvements.. Starting to be like intentionally weakened releases. only now ? (sorry getting tired of the xpm mafia... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ) not mentioning the fact that the coin rate is going down...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Strannik-74
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 03:04:24 PM |
|
At what speed do you run your cards (especially 280x)?
280X 1175/750 -ss 2 -t 8
|
|
|
|
mirny
Legendary
Offline
Activity: 1108
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 03:19:54 PM |
|
At what speed do you run your cards (especially 280x)?
280X 1175/750 -ss 2 -t 8 hello, can I ask how did you do that? I can set gpu engine to 1100mhz and memclock to 950mhz or 1000/850, so maximum what i can do is 150mhz difference between engine/memclock, when I try e.g. 1100/800, memclock will set to default. you've got difference 425mhz what kind of tuning SW, are you using, did you flash a bios or something, to allow this difference?
|
This is my signature...
|
|
|
incognitoworker
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 03:30:38 PM |
|
At what speed do you run your cards (especially 280x)?
280X 1175/750 -ss 2 -t 8 hello, can I ask how did you do that? I can set gpu engine to 1100mhz and memclock to 950mhz or 1000/850, so maximum what i can do is 150mhz difference between engine/memclock, when I try e.g. 1100/800, memclock will set to default. you've got difference 425mhz what kind of tuning SW, are you using, did you flash a bios or something, to allow this difference? You can do it with msi afterburner or similar.
|
|
|
|
Strannik-74
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 03:54:13 PM |
|
At what speed do you run your cards (especially 280x)?
280X 1175/750 -ss 2 -t 8 hello, can I ask how did you do that? I can set gpu engine to 1100mhz and memclock to 950mhz or 1000/850, so maximum what i can do is 150mhz difference between engine/memclock, when I try e.g. 1100/800, memclock will set to default. you've got difference 425mhz what kind of tuning SW, are you using, did you flash a bios or something, to allow this difference? I use MSIAfterburner300Beta19, it is very large intervals settings. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fclip2net.com%2Fclip%2Fm0%2Fthumb640%2F1399477968-clip-61kb.jpg&t=665&c=GvXH_I6qv1fC0g)
|
|
|
|
sniperlee
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 04:45:37 PM |
|
On my cards I noticed After Burner reports whatever I set it to, but if you fire up GPU-Z it shows memory is at default speed. I found best compromise was 1200 on memory on 280x to not hurt performance, Engine at whatever you want. Mine are stable at 1140, but I've ran at 1160. Don't know if -t 8 is needed anymore, I'm just running -ss 2 on slower CPUs Actually, if you're stable at 1175, and you confirm in GPU-Z that memory is stock clock, try 1200 for memory, it'll be lower than stock and you'll save some power/heat. At what speed do you run your cards (especially 280x)?
280X 1175/750 -ss 2 -t 8 hello, can I ask how did you do that? I can set gpu engine to 1100mhz and memclock to 950mhz or 1000/850, so maximum what i can do is 150mhz difference between engine/memclock, when I try e.g. 1100/800, memclock will set to default. you've got difference 425mhz what kind of tuning SW, are you using, did you flash a bios or something, to allow this difference? I use MSIAfterburner300Beta19, it is very large intervals settings. http://clip2net.com/clip/m0/thumb640/1399478116-clip-60kb.jpg http://clip2net.com/clip/m0/thumb640/1399477968-clip-61kb.jpg
|
|
|
|
atp1916
Legendary
Offline
Activity: 854
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 04:47:26 PM Last edit: May 07, 2014, 05:12:32 PM by atp1916 |
|
I don't use it but why not just update to the fastest already.
Getting harder to believe the algo/method can be tweaked multiple times with improvements.. Starting to be like intentionally weakened releases.
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi58.tinypic.com%2Frr7cqt.png&t=665&c=YAeX4X5ETV5QMg)
|
|
|
|
user2
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 07:35:20 PM |
|
Next version will be a major update with much better mining speed.
I don't use it but why not just update to the fastest already. Getting harder to believe the algo/method can be tweaked multiple times with improvements.. Starting to be like intentionally weakened releases. You are looking for conspiracy where likely there is none. The guy gets % from mining revenue - he has no incentive to slow things down. It's not like he is charging for updates. And what's wrong with anouncing next release he is testing probably now?
|
▒ NOW token ▒ by ChangeNOW ▒ Get the WIN! ▒ ChangeNOW - an instant Non-custodial Exchange Service (( changenow.io ))
|
|
|
aikklond
Legendary
Offline
Activity: 1148
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 07:46:14 PM |
|
i am getting 98% GPU usage when solo mining is this normal? should it be 99%?
|
|
|
|
|