Claymore XPM GPU Miner discussion

[bclcjunkie]

this would be good and put solo mining back on track... i feel you still have room to optimize for multi-gpu or multi-core gpus...

Hello Claymore. Thanks for the speedup. I have one question. Do you planning to add temp target setting in your miner with auto fan option? i have one card on my rig which is a little bit crazy. around 15 C is hotter than others. with msi afterburner i can adjust fan control but for all cards and separately not. All my fans is at 80% cause of that one crazy card. Thanks

Yes. Also I plan multigpu support.

[Cr@zyheo]

Hello Claymore. Thanks for the speedup. I have one question. Do you planning to add temp target setting in your miner with auto fan option? i have one card on my rig which is a little bit crazy. around 15 C is hotter than others. with msi afterburner i can adjust fan control but for all cards and separately not. All my fans is at 80% cause of that one crazy card. Thanks

Try user defined software automatic fan control mode.

[restless]

Is there some kind of calculator?
Eg, testing GPU miner atm but have no idea in terms of XPM what to expect

Code:

Mon May 12 13:35:58 2014
New Block: 538711 - Current Diff: 10.923408
Total/Valid shares: [ 0 / 0 ]  -  Max diff: 0.000000
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [     0K] [      0] [      0] [      0] [      0] [      0] [      0]
  ch/h: [      0] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000]
Estimated CPD: 189.7915, Average CPD:  0.0000, Mining time: 00:07
══════════════════════════════════════════════════════════════════════════════

Is this normal?
7 min of work and not a single share?!
The card is 6970

[Atma-n]

Is there some kind of calculator?
Eg, testing GPU miner atm but have no idea in terms of XPM what to expect

Code:

Mon May 12 13:35:58 2014
New Block: 538711 - Current Diff: 10.923408
Total/Valid shares: [ 0 / 0 ]  -  Max diff: 0.000000
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [     0K] [      0] [      0] [      0] [      0] [      0] [      0]
  ch/h: [      0] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000]
Estimated CPD: 189.7915, Average CPD:  0.0000, Mining time: 00:07
══════════════════════════════════════════════════════════════════════════════

Is this normal?
7 min of work and not a single share?!
The card is 6970

Sad to say but the 6xxx cards are not supported.

[restless]

is there GPU miner which works on older radeons? 

[yogibaer]

is there GPU miner which works on older radeons? 

There're open source miners now. Perhaps someone is going to code something for older cards soon.

[mirny]

is there GPU miner which works on older radeons? 

xpmclminer support Radeon HD5xxx/6xxx and NVidia GPUs.

[amartinz]

Seems like MEM frequency doesn't matter on v8 miner. TRT on 1500Mhz is 113, on 700Mhz the same 113 on R9 290x.
GPUs are a bit colder with low MEM.

[urubu]

is there any setting changes or updates needed when we hit 11 difficulty?

[antonio8]

Been runnig a R9 280x for 23 hours now. CPD is 4.6375 and I have found 8 10ch but my max difficulty has stayed at 10.770764 since the 3rd 10ch I have found.

Using an Intel Xeon L5520 here is my bat: NsXpmMiner.exe -o localhost:7332 -u YourLogin -p YourPassword -xpm "my wallet address" -di 0 Using version 8.0 solo.

Anything I might be able to change or add?

[zikomoto]

hello everybody , i have catalyst 14.12 and i have downloaded claymore , in the .bat file i set up all good and i start mining , with 7950 when i start it's complaining about a lot of thing i don't undertsand and it start mining , i see 0.7 cpd in estimated , i don't know where i have to write cpu_max_alloc_percent cause i was using linux before , could someone tell me what's the problem ?

[AVG22]

If you read the readme!!!.txt you must see:

Catalyst 13.12 is highly recommended for best performance and compatibility!

in your *.bat write like this:


setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD



try also add parametrs to miner string  "-ss 3" or "-ss2"

[zikomoto]

If you read the readme!!!.txt you must see:

Catalyst 13.12 is highly recommended for best performance and compatibility!

in your *.bat write like this:


setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD



try also add parametrs to miner string  "-ss 3" or "-ss2"

oh thank you ,  i will try it

[olajos]

If you read the readme!!!.txt you must see:

Catalyst 13.12 is highly recommended for best performance and compatibility!

in your *.bat write like this:


setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD



try also add parametrs to miner string  "-ss 3" or "-ss2"

Hello

I`m using 14.4 catalyst, and without problem. everything is working like a charm. I am using a week or more...

[letitbit]

Is it support lowend card like 7790 ?

[SpeedDemon13]

Is it support lowend card like 7790 ?

Works with all GCN cards. It will work on that 7790, but not very fast.

[jorneyflair]

Claymore , where can i download the "Primecoin wallet Claymore Solo Edition" i cant find the link

[AVG22]

after v 3.1 solo you don't need "Primecoin wallet Claymore Solo Edition"

readme!!.txt help for you! read it all text!

[zikomoto]

If you read the readme!!!.txt you must see:

Catalyst 13.12 is highly recommended for best performance and compatibility!

in your *.bat write like this:


setx GPU_MAX_ALLOC_PERCENT 100
NsXpmMiner.exe -o ypool.net -u USERNAME -p YOURPASSWORD



try also add parametrs to miner string  "-ss 3" or "-ss2"

Hello

I`m using 14.4 catalyst, and without problem. everything is working like a charm. I am using a week or more...

i 'm back using 13.12 now but warning keep shiwing in start , something like  "linking 2 modules of different target triples , i don't know what is that
now i'm with 3 7950 cards , they are showing like 1.3 cpd each one , with a config -ss 2 and each bat has his own address . is it good or bad ??

[antonio8]

So I have found a total of twenty 10ch but only 1 block. 2 of my cards have been stuck at the same max diff for over 15 hours now after finding more than four 10ch each.

I just am just curios if I am wasting my time so I can move on to something else if needed.