[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool

[ircactus]

@Searing The high btc rental rates will last till the 19th.

That would be awesome for sure.

[nicehashdev]

Anyone else seeing a payout from transaction f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc but not posting to account. Clicking it also says transaction not found on blockchain.info

Curious.

http://btc.blockr.io/tx/info/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc

[ryen123]

@Searing The high btc rental rates will last till the 19th.

That would be awesome for sure.

Many people including me are mining for paycoin. The POW phase will end on 19th.

[cryptoboy42]

Anyone else seeing a payout from transaction f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc but not posting to account. Clicking it also says transaction not found on blockchain.info

Curious.

having the same issue as ircactus

https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc




edit: resolved

[Ntrain2k]

Same problem

https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc

[Muhammed Zakir]

Same problem

https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc

It isn't coming with Blockchain.info and Blockexplorer.com but is coming in https://www.blocktrail.com/BTC/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc and http://btc.blockr.io/tx/info/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc .

   ~~MZ~~

[Muhammed Zakir]

Thanks for response.
I haven't set #xnsub and it worked fine until yesterday...

Can you please post the contents of your .bat file or config file here?

   ~~MZ~~

[Ntrain2k]

Same problem

https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc

It isn't coming with Blockchain.info and Blockexplorer.com but is coming in https://www.blocktrail.com/BTC/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc and http://btc.blockr.io/tx/info/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc .

   ~~MZ~~

What's wrong with the network then? Usually posts within 30 min or so. It's been almost 3 hrs.

[ATCkit]

So decided to upgrade my units to use the extranonce patch at westhash/nicehash.

 
To cut a long story short:

-Step one was to upgrade the firmware to antminer_S320141126.bin. The result was: my units mined perfectly well on AntPool but on any other pool including Westhash, they dropped below 100 GHS.

- I tried most of the suggestions on the Bitmain discussion thread and elsewhere...but to no avail.

- In the end, I went back to original firmware. While doing so, one of my S3s got stuck for about 30 minutes while i was flashing it. Now i cannot connect to that S3. Even the reset button did not help me. That S3 is now incommunicado. Luckily, I still have 2 weeks left on its warranty and can likely do an RMA.

[specgamer]

What are the fees like here?  I like to use PBmining but know I see that they've collapsed?

[raskul]

sorry for OT... ATCkit, you may wish to review your signature links. some of these ponzi's have already collapsed.  

EDIT: oops ninja'd by specgamer ^

[ATCkit]

What are the fees like here?  I like to use PBmining but know I see that they've collapsed?

All are cheaper than buying rigs. Check 'em out here: http://www.rigwarz.com/

Bitcoin Cloud Services: has the best payout. It's daily and equivalent to btcguild or ghash for 1 THS... but not as good as NiceHash.

PB Mining: pays a bit less than Bitcoin Cloud Services. I will get my PB Mining weekly payout in about 8 hours. Then, I can tell you better if they have collapsed. I had no problem logging in to their site just now. I doubt that they have collapsed.

Cloud Mining.website: is very cheap to buy. It's payouts are lower than the other two. So, It will take me over 140 days to break even with it. But that's better than buying more S3s.

Re: Ponzis: There are always suspects and those who call everything a ponzi. As far as I'm concerned, who really knows for sure which site is  actually a ponzi in the mining world. My heart even drops into my shoes when i buy from Bitmain (and i know they are one of the most trustworthy). Some are even calling GAW a Ponzi- lol!

Anyway, the best thing to do is to diversify. That way, if one is actually a Ponzi in about 5 months, then you haven't lost everything.

[Syke]

Re: Ponzis: There are always suspects and those who call everything a ponzi. As far as I'm concerned, who really knows for sure which site is  actually a ponzi in the mining world. My heart even drops into my shoes when i buy from Bitmain (and i know they are one of the most trustworthy). Some are even calling GAW a Ponzi- lol!

Here's how you tell. If you can not point the hashpower to any pool of your chosing, then it is most likely a ponzi.

[CHAOSiTEC]

What are the fees like here?  I like to use PBmining but know I see that they've collapsed?

All are cheaper than buying rigs. Check 'em out here: http://www.rigwarz.com/

Bitcoin Cloud Services: has the best payout. It's daily and equivalent to btcguild or ghash for 1 THS... but not as good as NiceHash.

PB Mining: pays a bit less than Bitcoin Cloud Services. I will get my PB Mining weekly payout in about 8 hours. Then, I can tell you better if they have collapsed. I had no problem logging in to their site just now. I doubt that they have collapsed.

Cloud Mining.website: is very cheap to buy. It's payouts are lower than the other two. So, It will take me over 140 days to break even with it. But that's better than buying more S3s.

Re: Ponzis: There are always suspects and those who call everything a ponzi. As far as I'm concerned, who really knows for sure which site is  actually a ponzi in the mining world. My heart even drops into my shoes when i buy from Bitmain (and i know they are one of the most trustworthy). Some are even calling GAW a Ponzi- lol!

Anyway, the best thing to do is to diversify. That way, if one is actually a Ponzi in about 5 months, then you haven't lost everything.

https://coinfire.cf/2014/12/10/pb-mining-comes-crashing-down/

[ATCkit]

 Got my PB Mining payout early tonight. It was about 45 % lower than usual.

[durdur23]

So decided to upgrade my units to use the extranonce patch at westhash/nicehash.

 
To cut a long story short:

-Step one was to upgrade the firmware to antminer_S320141126.bin. The result was: my units mined perfectly well on AntPool but on any other pool including Westhash, they dropped below 100 GHS.

- I tried most of the suggestions on the Bitmain discussion thread and elsewhere...but to no avail.

- In the end, I went back to original firmware. While doing so, one of my S3s got stuck for about 30 minutes while i was flashing it. Now i cannot connect to that S3. Even the reset button did not help me. That S3 is now incommunicado. Luckily, I still have 2 weeks left on its warranty and can likely do an RMA.

Same thing happened to me when I decided to update to 11/26 ver.
Hash rate dropped a lot so I returned to 10/26 ver, which runs fine

[durdur23]

Thanks for response.
I haven't set #xnsub and it worked fine until yesterday...

Can you please post the contents of your .bat file or config file here?

   ~~MZ~~

Hi, I am not sure if this will be enough info, but this is what I got from antminer page.

cgminer --bitmain-options 115200:32:8:18:225:0882 -o stratum+tcp://Betarigs -O ID:PW -o stratum+tcp://stratum.nicehash.com:3334 -O ID:PW -o stratum+tcp://us1.ghash.io:3333 -O ID:PW --api-listen --api-network --bitmain-checkn2diff --bitmain-hwerror --version-file /usr/bin/compile_time --queue 4096

I am running rigs in two different places and rigs at the other place runs fine although I don't have enough time to confirm (just set up 1 hr ago).
The other thing is it used to be fine until yesterday.

[Anonz]

Hi,

any thoughts about supporting the great Coin Magi M7M algorithm with NiceHash?

Thread about XMG: https://bitcointalk.org/index.php?topic=735170.0
Market of XMG: https://bittrex.com/Market/Index?MarketName=BTC-XMG
Community of #Magi with over 70 users on IRC:  https://kiwiirc.com/client/irc.freenode.net/#magi

[CHAOSiTEC]

So decided to upgrade my units to use the extranonce patch at westhash/nicehash.

 
To cut a long story short:

-Step one was to upgrade the firmware to antminer_S320141126.bin. The result was: my units mined perfectly well on AntPool but on any other pool including Westhash, they dropped below 100 GHS.

- I tried most of the suggestions on the Bitmain discussion thread and elsewhere...but to no avail.

- In the end, I went back to original firmware. While doing so, one of my S3s got stuck for about 30 minutes while i was flashing it. Now i cannot connect to that S3. Even the reset button did not help me. That S3 is now incommunicado. Luckily, I still have 2 weeks left on its warranty and can likely do an RMA.

Same thing happened to me when I decided to update to 11/26 ver.
Hash rate dropped a lot so I returned to 10/26 ver, which runs fine

in the latest firmware you need to go into advanced and set mhz and voltage

std voltage is 0.725

[Anonz]

How does it get you those results?

So decided to upgrade my units to use the extranonce patch at westhash/nicehash.

 
To cut a long story short:

-Step one was to upgrade the firmware to antminer_S320141126.bin. The result was: my units mined perfectly well on AntPool but on any other pool including Westhash, they dropped below 100 GHS.

- I tried most of the suggestions on the Bitmain discussion thread and elsewhere...but to no avail.

- In the end, I went back to original firmware. While doing so, one of my S3s got stuck for about 30 minutes while i was flashing it. Now i cannot connect to that S3. Even the reset button did not help me. That S3 is now incommunicado. Luckily, I still have 2 weeks left on its warranty and can likely do an RMA.

Same thing happened to me when I decided to update to 11/26 ver.
Hash rate dropped a lot so I returned to 10/26 ver, which runs fine

in the latest firmware you need to go into advanced and set mhz and voltage

std voltage is 0.725