TECHNOBIT support tread + customer feedback

[marto74]

I´m waiting for 2 HEXA2 units and 3 HEXA units since February, i´ve send them for repair / swap because they had problems and never receive them back, several emails where send always with some unprofessional answer in order me to wait and wait and wait, then suddenly they tell me they never received any items, i´ve send them the tracking number for them to check the order was received, then they told me again to wait and wait for them to check

So this gos on and on since February all my money is lost, and i will never ever get roi on those products even if they send to me today


So be careful when ordering from this company, they have the worst after sale service you can get

Tracking please

[braindead]

------ Original Message ------
From: "Pedro Póvoas Busntech Manager" <boss@busntech.net>
To: office@technobit.eu
Sent: 10.4.2014 г. 7:47:19
Subject: RE: [TechnoBit] Message from contact form [no_sync]
 
Hello

So can you please explain this:

http://www.chronopost.pt/track-trace?track-id=09601010343865Y

Order as arrived on your facilities on 17 January, since then i´ve send several emails regarding this matter and no positive answer

Can you imagine my lost in all this matter?? Having miners stopped on your facilities since 17 January till now ?? 2 Hexa2 miners and 3 Hexa miners now they don´t worth nothing, and with this difficulty I won´t get any btc with them, they can´t even pay the electricity bill

Best regards:
Pedro Póvoas

[marto74]

------ Original Message ------
From: "Pedro Póvoas Busntech Manager" <boss@busntech.net>
To: office@technobit.eu
Sent: 10.4.2014 г. 7:47:19
Subject: RE: [TechnoBit] Message from contact form [no_sync]
 
Hello

So can you please explain this:

http://www.chronopost.pt/track-trace?track-id=09601010343865Y

Order as arrived on your facilities on 17 January, since then i´ve send several emails regarding this matter and no positive answer

Can you imagine my lost in all this matter?? Having miners stopped on your facilities since 17 January till now ?? 2 Hexa2 miners and 3 Hexa miners now they don´t worth nothing, and with this difficulty I won´t get any btc with them, they can´t even pay the electricity bill

Best regards:
Pedro Póvoas

You got PM

[jimmothy]

minion tests

Got the results yet?

Also is that just a test board or is it expected to actually hold 8 minions?

[marto74]

For sure it will hold @ least 4 chips
up to 8

[jimmothy]

For sure it will hold @ least 4 chips
up to 8

I'm guessing the power cable will be moved?

Also got an ETA on when these will begin production? I know many of us with BA orders would love it if we had another option other than waiting for BA to build our miners..

Side note: Density looks pretty good for immersion cooling especially if you can fit all 8 chips on that tiny board.

[marto74]

We are working on it .
I hope in the next few days we'll have the first results

[marto74]

Yes very first test 1 chip @ 78 GHs

[marto74]

! minion chip with cgminer @ 90+ Ghs
* the driver in cgminer is still rough, and yet there is no new device descriptor

[Zich]

! minion chip with cgminer @ 90+ Ghs
* the driver in cgminer is still rough, and yet there is no new device descriptor

Gratz for the achievement   

[marto74]

Thank you Zich

[Beastlymac]

Yes very first test 1 chip @ 78 GHs

Nice looking stats. Congrats Marto.

[marto74]

Thank you

[marto74]

0.3.4* cgminer for hex BTC Miners - patch to cgminer 4.3.4 rev_c1d58161486db4ccd44a27bf43ab682017284608.patch* cgminer for hex Scrypt Miners - patch to cgminer 4.3.4 srev_c1d58161486db4ccd44a27bf43ab682017284608.patch* SCgminer is not tested om LE (i386) there might be some endianess issues!!!!!* openwrt updated to r40996* openwrt web new config tabs* Please disable from ssh all services that are not needed/etc/init.d/luci_fixtime disable/etc/init.d/luci_dhcp_migrate disable/etc/init.d/telnet disable/etc/init.d/sysntpd disable/etc/init.d/led disable/etc/init.d/log disable/etc/init.d/(s)cgminer disable – If you happen to have both LTC and BTC miners leave both enabled
* HEXs (HEX8A2) scrypt options  1200 / 980 mV

http://technobit.eu/0_3_4.rar


Todo
* Work on Minion and prepare for board launch.
* HEXS cleanup, testing bugs an so on in preparation for the board launch - Done
* HEX8A1 4 chip cleanup, testing bugs an so on in preparation for the board launch - done
* HEX8A1 cleanup, testing bugs an so on in preparation for the board launch - done
* add support for HEX8A1 - 6/8 chip Coincraft A1 board aslso known as HEX8 - done
* finish cgminer nanofury support - done
* add cgminer monitor script - done
* stay in sync with official cgminer git and build fresh openwrt images - synced
* add auto frequency adjustment support avalon-auto style - canceled
* add configuration options (voltage and clock) per board based on HEX16A serial number - canceled

HowTo Compile:
1. Download cgminer git to match with patch revision
2. cd cgminer
3. patch -p1 < /path_to_patch/9ce30b7bdf5d6756046f83e4f0d97da421963002.patch (example)
4. ./autogen.sh --enable-hexminera --enable-hexminerb --enable-hexminerc --enable-hexmineru --enable-hexminer8
5. make
6. Scrypt - ./autogen.sh --enable-hexminers

[Zich]

Nice cgminer configuration page 
Thanks

[ZBC3]

Firmware update means minions are on the way !

Don't know how you design boards so quickly without endless meetings and charging customers membership fees.

[azazman]

Hello All

Just a note, I purchased 2 hex16B boards in the December shipment. All arrived on time, no issues and the devices have made their money back. Just wanted to drop a message here that I have not had any issues with Technobit and I am rather looking forward to the new minion boards if you are bring them out Marto; I was thinking about buying some of the hash-fast gold rush cards but I am going to wait for your minions boards first.

Thanks again Marto and co;

Here is me attempting to set the boards up to prove i not some random https://bitcointalk.org/index.php?topic=307897.msg3963900#msg3963900

[loshia]

Firmware update means minions are on the way !

Don't know how you design boards so quickly without endless meetings and charging customers membership fees.

Worse I think that marto is charging DEVELOPERS also known as  Project Members  
He is learning from the best players here
By the way marto please make sure that Minion will have a lot of blinking leds. Make sure you will post fancy video of PCB with blinking leds  

[marto74]

I promise will try to put so many blinking leds on the board, so it will have double purpose:
Bitcoin mining board and Christmas lights

[WiWi]

Maybe something like a knightrider light, going left-right or up-down, and of course programmable with patterns