TECHNOBIT support tread + customer feedback

[sorehammer]

Ah sexy so so sexy me want one

[1715094367]

1715094367

[1715094367]

1715094367

[marto74]

800 GHs enclosed minion based miner for sale
October delivery - http://technobit.eu/index.php?id_product=86&controller=product&id_lang=1









image upload no limit

[marto74]

windows cgminer for 0.3.9
http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_9.zip

10x 2GOOD

[hammer]

What GH in low power mode?
What Power in Turbo mode?
Can you make a table like this here: http://i.imgbox.com/tFupZKN2

Customer must know the Dimension of psu!
In Germany the power is most expensive so me must have a low power miner. But to calculate we must know the exact values!!!


Best regards!

[marto74]

What GH in low power mode?
What Power in Turbo mode?
Can you make a table like this here: http://i.imgbox.com/tFupZKN2

Customer must know the Dimension of psu!
In Germany the power is most expensive so me must have a low power miner. But to calculate we must know the exact values!!!


Best regards!

In turbo did not have the chance to mesure it yet
The last test with Wattmeter was about 320-330 W with 500 GHs @ the wall i.e. including PSU loses

[sorehammer]

That's great power consumption.

[Cortex7]

@Marto:

ORDER# HCRSHRFOY  2 x Flashed TPLinks, paid in cash.

My HEX4M boards have shipped (thanks ), but you may have forgotten to send my TPLinks?


P.S:
Your new miner design looks GREAT!

[marto74]

http://technobit.eu/0_4_0.rar
* 0.4.0
* Known Issues reported by users:
  1. dhcp client my brick your router - do not use it
  2. Openwrt failsafe mode is not working
  3. Startup scripts are messed up during upgrade. Fix them via web or check and execute /usr/bin/fix_rc. Minimum is (s)cgminer and udev (Hotplug) to be enabled during startup
* cgminer for hex BTC Miners - patch to cgminer 4.6.1 rev_9afd0a216a0f95adb650e4818f24af1a61ad837d.patch
* cgminer for hex Scrypt Miners - patch to cgminer 4.6.1 srev_9afd0a216a0f95adb650e4818f24af1a61ad837d.patch
* cgminer - HEXR driver production release
* Compile Rocker HEXR ./autogen.sh ..... --enable-hexminerr
* Rocker (HEXR) new cgminer config options
--hexminerr-asic-diff use at least 16 here and meake sure your pool worker min difficulty is configured accourdingly in order not to loose hash rate
--hexminerr-pic-roll - Default: 60 or 90. MicroChip PIC work internal roll count - Reduces dramatically USB load - range 0-255. Please use at least 10 or 20 here
--hexminerr-chip-mask - 255 enable all chips
--hexminerr-voltage  - core voltage Default: 690
--hexminerr-options chip_count:frequency Default: 4:650
* openwrt - New HEXR web config tabs to reflect above
* openwrt updated to 42657
Todo
* Fix dhcp,failsafe and startup scripts when time alows
* Fix bugs HEXR (Spondoolies-Tech Rocker ASICs) in preparation for board launch - done

[marto74]

Setup guide for hex4M http://technobit.eu/hex4M_set.pdf

[sorehammer]

http://technobit.eu/0_4_0.rar
* 0.4.0
* Known Issues reported by users:
  1. dhcp client my brick your router - do not use it
  2. Openwrt failsafe mode is not working
  3. Startup scripts are messed up during upgrade. Fix them via web or check and execute /usr/bin/fix_rc. Minimum is (s)cgminer and udev (Hotplug) to be enabled during startup
* cgminer for hex BTC Miners - patch to cgminer 4.6.1 rev_9afd0a216a0f95adb650e4818f24af1a61ad837d.patch
* cgminer for hex Scrypt Miners - patch to cgminer 4.6.1 srev_9afd0a216a0f95adb650e4818f24af1a61ad837d.patch
* cgminer - HEXR driver production release
* Compile Rocker HEXR ./autogen.sh ..... --enable-hexminerr
* Rocker (HEXR) new cgminer config options
--hexminerr-asic-diff use at least 16 here and meake sure your pool worker min difficulty is configured accourdingly in order not to loose hash rate
--hexminerr-pic-roll - Default: 60 or 90. MicroChip PIC work internal roll count - Reduces dramatically USB load - range 0-255. Please use at least 10 or 20 here
--hexminerr-chip-mask - 255 enable all chips
--hexminerr-voltage  - core voltage Default: 690
--hexminerr-options chip_count:frequency Default: 4:650
* openwrt - New HEXR web config tabs to reflect above
* openwrt updated to 42657
Todo
* Fix dhcp,failsafe and startup scripts when time alows
* Fix bugs HEXR (Spondoolies-Tech Rocker ASICs) in preparation for board launch - done

done the new update and the minoin did not start the settings are the same as before had to roll back to the last update.

[loshia]

http://technobit.eu/0_4_0.rar
* 0.4.0
* Known Issues reported by users:
  1. dhcp client my brick your router - do not use it
  2. Openwrt failsafe mode is not working
  3. Startup scripts are messed up during upgrade. Fix them via web or check and execute /usr/bin/fix_rc. Minimum is (s)cgminer and udev (Hotplug) to be enabled during startup
* cgminer for hex BTC Miners - patch to cgminer 4.6.1 rev_9afd0a216a0f95adb650e4818f24af1a61ad837d.patch
* cgminer for hex Scrypt Miners - patch to cgminer 4.6.1 srev_9afd0a216a0f95adb650e4818f24af1a61ad837d.patch
* cgminer - HEXR driver production release
* Compile Rocker HEXR ./autogen.sh ..... --enable-hexminerr
* Rocker (HEXR) new cgminer config options
--hexminerr-asic-diff use at least 16 here and meake sure your pool worker min difficulty is configured accourdingly in order not to loose hash rate
--hexminerr-pic-roll - Default: 60 or 90. MicroChip PIC work internal roll count - Reduces dramatically USB load - range 0-255. Please use at least 10 or 20 here
--hexminerr-chip-mask - 255 enable all chips
--hexminerr-voltage  - core voltage Default: 690
--hexminerr-options chip_count:frequency Default: 4:650
* openwrt - New HEXR web config tabs to reflect above
* openwrt updated to 42657
Todo
* Fix dhcp,failsafe and startup scripts when time alows
* Fix bugs HEXR (Spondoolies-Tech Rocker ASICs) in preparation for board launch - done

done the new update and the minoin did not start the settings are the same as before had to roll back to the last update.

Did you fill blanks in the Rocker cgminer config?
Did you fix startup scripts?
you can always ssh to tplink and exec screen -r btc it will tell you what went wrong

[sorehammer]

no don't have a rocker so didn't look in that one

[loshia]

no don't have a rocker so didn't look in that one

That is the problem. when upgrading your old cgminer config is kept. without rocker config it will not start
1. Upgrade
2. Check all cgminer web tabs and leve nothing blank. Just fill default values as suggested. That is enough
3. exec fix_rc - it will reboot the tplink
4. Enjoy
5. And do not use dhcp client of course
Finaly: If all works do not touch it leve old version

[sorehammer]

got it running now that I know new version doesn't fill gaps if settings are kept will check on next update.

[loshia]

got it running now that I know new version doesn't fill gaps if settings are kept will check on next update.

Cool

[WiWi]

Hi Marto,

Where u able to send the Hex4M last tuesday?

[Cortex7]

@Marto: I know you're a busy man , but can you post out my TPLinks (already payed via paypal).

[sorehammer]

@Marto: I know you're a busy man , but can you post out my TPLinks (already payed via paypal).

nice setup I'm so jealous.

[Cortex7]

@sorehammer, my coolers suck tho (and blow of course )

@marto: I was playing with a new logo design for you:

[sorehammer]

Did you go for the cheap coolers.