TECHNOBIT support tread + customer feedback

[WiWi]

Hi Vesi,

Would be nice if i could receive the new HEX4M as soon as possible, the one i´ve got here is working on half speed since arrival 2 months ago.
If you guys could please send me the new one, i can return the defective one asap.
Its problem with controller chips as Martin explained to me

Regards
Wilco

[ZBC3]

Got my 4Hex16E and its a nice design. I am looking forward to your future miners that will be similiar in design.

My miner was hashing at an avg of 610 GH/s for 4 hours, but then suddenly stopped. Is there anything i could post from the tplink log that would be helpful? Im using a corsair cxm750 to power the miner. Your help is greatly appreciated.

[technobitVesi]

Got my 4Hex16E and its a nice design. I am looking forward to your future miners that will be similiar in design.

My miner was hashing at an avg of 610 GH/s for 4 hours, but then suddenly stopped. Is there anything i could post from the tplink log that would be helpful? Im using a corsair cxm750 to power the miner. Your help is greatly appreciated.

Hi,
check first the PSU please

Regards Vesi

[Zich]

Got my 4Hex16E and its a nice design. I am looking forward to your future miners that will be similiar in design.

My miner was hashing at an avg of 610 GH/s for 4 hours, but then suddenly stopped. Is there anything i could post from the tplink log that would be helpful? Im using a corsair cxm750 to power the miner. Your help is greatly appreciated.

Sound like overload. I believe you will need at least 800 watt PSU.

[Cortex7]

Hi technobitVesi,

ORDER#: HCRSHRFOY

2 x TPLinks, payed for in full via paypal a couple of months ago.

I got my HEX4Ms but not my TPLinks

P.S. Rockerbox chips look nice.

HI,
Sorry for the delay on tp-link's
1.We can ship them Monday.
As far you can get these in your local market and flash them, do you want us to refund this order or you still want them shipped?
2. The new revision of the chips looks better


Regards: Vesi

Yes, a paypal refund would be fine if its easier for you guys.

[WiWi]

Did you receive my PM Vesi?

[ZBC3]

Thanks for the feedback. I switched to a 1000 w 4 rail psu with 25a on each rail.  I just connected it to the 16Hex4E and it powers on, but i dont see any hashing.

[loshia]

Thanks for the feedback. I switched to a 1000 w 4 rail psu with 25a on each rail.  I just connected it to the 16Hex4E and it powers on, but i dont see any hashing.

A screenshot of your cgminer screen and lsusb output also?
Did you upgrade de the tplink recently?
If yes just make sure that cgminer starts and exec /usr/bin/fix_rc

[technobitVesi]

Thanks for the feedback. I switched to a 1000 w 4 rail psu with 25a on each rail.  I just connected it to the 16Hex4E and it powers on, but i dont see any hashing.

Can you provide us Team Viewer access to a PC inside the network where tp-link is?

[ZBC3]

With the tplink that came with the 16Hex4E, I used ssh to start the miner and it immediately was killed. Then I tried using the tplink I updated, and when I ssh into it runs the miner after typing cgminer with pool info. However, when I close ssh, it shuts down the miner. How do I give tw access?

How do I give tw access without a PC? If that's not possible, then what are the instructions for giving tw access with a PC? I may have to get one from
My office if I need to.

TechnobitVesi:
I added trust to your bitcointalk user profile.

[sorehammer]

so how do you ssh without  a pc ?

[ZBC3]

Iphone/ipad


Lost my home pc in a lightning storm a few weeks ago and haven't bought a new one yet. 

[sorehammer]

sorry to hear that, with out a pc they can't teamview to help.

[technobitVesi]

Hi, All,
Our pre-production run of HEX4RBox - enclosed 4 chips RockerBox based miner is in sale now

http://technobit.eu/index.php?id_product=87&controller=product&id_lang=1

[IYFTech]

Sorry to ask, but have these been tested on p2pool? I quite fancy a couple if they work OK.......

[technobitVesi]

Sorry to ask, but have these been tested on p2pool? I quite fancy a couple if they work OK.......

HI,
We are working on a P2Pool solution for our miners.
Will update as soon as tested and ready

Regards: Vesi

[IYFTech]

Sorry to ask, but have these been tested on p2pool? I quite fancy a couple if they work OK.......

HI,
We are working on a P2Pool solution for our miners.
Will update as soon as tested and ready

Regards: Vesi

That's great news, thanks. Look forward to seeing the results 

[kuperis]

Hi, All,
Our pre-production run of HEX4RBox - enclosed 4 chips RockerBox based miner is in sale now

http://technobit.eu/index.php?id_product=87&controller=product&id_lang=1

Hi, can u explain.. power consumption? in the website says "Pwer consumtion as less as 0.40 W/GHs in power saving mode" ? what is real power consumption for 800 GHs?
its all the time confuses where in your site there says jus about saving mode... we need real number.

[Zich]

With the tplink that came with the 16Hex4E, I used ssh to start the miner and it immediately was killed. Then I tried using the tplink I updated, and when I ssh into it runs the miner after typing cgminer with pool info. However, when I close ssh, it shuts down the miner. How do I give tw access?

That's just not right. Why you need to type cgminer to run?
It's suppose to autorun & they run under "screen". Configuration can be done with luci web interface.

Of course i didn't try latest firmware yet  

[ZBC3]

It's my fault. Technobit used teamviewer to fix my mistake. Thanks again to Technobit for taking time to help me.

Also big thanks to Loshia for offering assistance!

Now I need someone to help me install some additional LED's . It's getting close to Christmas time and I need to decorate the house .