[ANN] MiningRigRentals.com - Web pool manager - Easy Mass Rentals - Algos!

[montyfd]

Even the salvation army ripped you off ....

http://www.ripoffreport.com/reports/search?body=fred96002001

[ebliever]

Looks like MRR is down, is this true for others as well?

Not only the website, I have a Rig running thru them that was pointed at YAAMP.com's X13 mining pool, and it is showing as dead over there. So whatever has happened to MRR is affecting miners on their service, apparently. Unfortunately I'm away from home so I can't shift my rig off MRR either... too bad, because things had been more stable with them the past week, than with the previous rental service I'd used up until that point.

[suchmoon]

Looks like MRR is down, is this true for others as well?

Not only the website, I have a Rig running thru them that was pointed at YAAMP.com's X13 mining pool, and it is showing as dead over there. So whatever has happened to MRR is affecting miners on their service, apparently. Unfortunately I'm away from home so I can't shift my rig off MRR either... too bad, because things had been more stable with them the past week, than with the previous rental service I'd used up until that point.

It looks ok for me. Both the website and the stratum server (US West).

[ebliever]

Does anyone know who compaqtco is and why he/she is fucking with ratings?

Rents a rig for 3 hours, rig performs at 100%+, I get 4 stars.

Rig underperforms (variance can be a bitch within 3 hours), no contact attempt, even if I catch it and add extra time I still get 2-3 stars.

I looked at some of their past ratings and it seems I'm not the only one affected by this.

Looks like someone is targeting competition but before I go complain to support I'd like to make sure it's not MRR itself doing some ill-advised QA or something.

Any ideas?

Just looked at my rental history, and yes, he rented from me and gave me 4 stars for a rental that looks like it went without a hitch. No idea why he'd mark it less than 5 stars. Some people just grade harder than others I guess.

BTW, MRR looks like it's back up a few minutes after my last post.

[kevin1234a]

wondering how they run this site what is the mechanism behind this website?

[theboccet]

I have an issue with 2FA and sent PM ans mails tout MRR but ni response at all.

[japerry]

I have an issue with 2FA and sent PM ans mails tout MRR but ni response at all.

I'm a new member of MRR and was going to set up 2FA. Before I do so, can you elaborate on your problem? I don't want to set it up and then lock myself out.

[theboccet]

I have an issue with 2FA and sent PM ans mails tout MRR but ni response at all.

I'm a new member of MRR and was going to set up 2FA. Before I do so, can you elaborate on your problem? I don't want to set it up and then lock myself out.

dont use google auth.if y ou loose your phone y ou will not be able tout restore your previews config.i actually use AUTHY after the issue.it's best and you can restore anything with your phone number

[japerry]

I have an issue with 2FA and sent PM ans mails tout MRR but ni response at all.

I'm a new member of MRR and was going to set up 2FA. Before I do so, can you elaborate on your problem? I don't want to set it up and then lock myself out.

dont use google auth.if y ou loose your phone y ou will not be able tout restore your previews config.i actually use AUTHY after the issue.it's best and you can restore anything with your phone number

Thanks for that. I've been using Authy for some time now. It's great!

[theboccet]

I have an issue with 2FA and sent PM ans mails tout MRR but ni response at all.

I'm a new member of MRR and was going to set up 2FA. Before I do so, can you elaborate on your problem? I don't want to set it up and then lock myself out.

dont use google auth.if y ou loose your phone y ou will not be able tout restore your previews config.i actually use AUTHY after the issue.it's best and you can restore anything with your phone number

Thanks for that. I've been using Authy for some time now. It's great!

it's OK.nos i have to reach mrr support but nothing montionned about that.

[ebliever]

Can anyone explain to me why some rentals result in a hashrate chart going haywire for my rig? Here's a screenshot I just took, halfway through a 24 hour rental on X15. Note how the chart looks mining my own pool on the left, versus the rental period on the right:



I've seen this a few times before and the overall average hashrate reported after the rental ends is actually "normal" - but why the wild variances? Everything looks normal and smooth on the rig itself, of course.

[suchmoon]

Can anyone explain to me why some rentals result in a hashrate chart going haywire for my rig? Here's a screenshot I just took, halfway through a 24 hour rental on X15. Note how the chart looks mining my own pool on the left, versus the rental period on the right:

https://i.imgur.com/bnVDBNY.png?1

I've seen this a few times before and the overall average hashrate reported after the rental ends is actually "normal" - but why the wild variances? Everything looks normal and smooth on the rig itself, of course.

Renter's pool difficulty is higher -> fewer shares -> more variance. Nothing to worry about, except in extreme cases where the difficulty is so high that it affects the average of the whole rental, or so low that it "chokes" your miner/controller/network/whatever with too many shares.

[ebliever]

Can anyone explain to me why some rentals result in a hashrate chart going haywire for my rig? Here's a screenshot I just took, halfway through a 24 hour rental on X15. Note how the chart looks mining my own pool on the left, versus the rental period on the right:

https://i.imgur.com/bnVDBNY.png?1

I've seen this a few times before and the overall average hashrate reported after the rental ends is actually "normal" - but why the wild variances? Everything looks normal and smooth on the rig itself, of course.

Renter's pool difficulty is higher -> fewer shares -> more variance. Nothing to worry about, except in extreme cases where the difficulty is so high that it affects the average of the whole rental, or so low that it "chokes" your miner/controller/network/whatever with too many shares.

Ahh, that makes good sense. Thanks for putting my mind at ease.

[gaalx]

Statistics are not formed correctly. Example - https://www.miningrigrentals.com/rental/140038.  in the calculation, it is necessary to do so - ((total Hashrate + Hashrate in extra time) / (lease time). Now this formula (total Hashrate + Hashrate in extra time) / (lease + extra time).   

[gaalx]

if the installation of renting for more than 24 hours, it is necessary to pay money every 24 + 12 hours.

[ebliever]

For some reason a (very) high proportion of my rigs lock-ups (where it freezes up and doesn't reboot/restart) are occurring at the start of rentals, usually a short while into it. Does anyone have any idea why? At first I thought it a fluke, but it's happening enough, and across multiple algorithms, to make me think there is something in the connection with MRR that is causing the problem. For example on Neoscrypt I ran for almost a week just now without any lock-up, only to have it die a few minutes into a rental this evening. I don't have any clues on my end. Any insight/advice/ideas would be appreciated.

[grendel25]

I've been trying to connect and mine but no success.  I tried on ccminer and sgminer (have multiple rigs with nvidia and amd).  My configs:

Code:

sgminer --k darkcoin.mod -o http://us-west01.miningrigrentals.com:3333 -u user.#'s -p x

ccminer --algo=x11 --url http://us-west01.miningrigrentals.com:3333 -u username.#'s -p x

I just get stratum_recv_line failed  on ccminer and long pole messages or just other bad messages on sgminer.  I've tried adding miners in the "POOL SETTINGS AND CONFIGURATIONS | WHERE YOUR RIG MINES AT WHEN IT'S NOT RENTED" but still nothing happens.  I tried various versions of https:// or stratum+tcp://

Other pools 'just work'.  What's up with this pool that's so different?  The stats sound nice but I can't seem to get mining on here.

Any pointers to get this mining?  thx

[gemmacoin]

For some reason a (very) high proportion of my rigs lock-ups (where it freezes up and doesn't reboot/restart) are occurring at the start of rentals, usually a short while into it. Does anyone have any idea why? At first I thought it a fluke, but it's happening enough, and across multiple algorithms, to make me think there is something in the connection with MRR that is causing the problem. For example on Neoscrypt I ran for almost a week just now without any lock-up, only to have it die a few minutes into a rental this evening. I don't have any clues on my end. Any insight/advice/ideas would be appreciated.

Did you set up backup stratums?, looks like EU stratums are having problems... from my experience, EU stratums are going offline very often (back and forth between EU and USA stratums)

[ebliever]

For some reason a (very) high proportion of my rigs lock-ups (where it freezes up and doesn't reboot/restart) are occurring at the start of rentals, usually a short while into it. Does anyone have any idea why? At first I thought it a fluke, but it's happening enough, and across multiple algorithms, to make me think there is something in the connection with MRR that is causing the problem. For example on Neoscrypt I ran for almost a week just now without any lock-up, only to have it die a few minutes into a rental this evening. I don't have any clues on my end. Any insight/advice/ideas would be appreciated.

Did you set up backup stratums?, looks like EU stratums are having problems... from my experience, EU stratums are going offline very often (back and forth between EU and USA stratums)

It's happening on rentals so I have no control over what pools the renter chooses. It would be nice if the rig defaulted back to our pools if a renter's pool dropped out for any reason. But I don't see why a dropped pool should lock up the miner. In my case it would lead to a 0-accepts condition which would force a reboot after 6 minutes, but then it would start trying to miner again, rebooting every six minutes. I don't think that is happening.

I'm using a multi-algorithm setup with active pools listed on at least three algorithms at MRR typically, with another backup pool that does not go through MRR if MRR dies entirely.

[TiltSinceBirth]

I can't figure out how to get my KNC Titan to work with MiningRigRentals, can anyone help me set it up?

Thanks