[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65%

[cryptonit]

coins should be in 1 lump or multiples of 1000?

Please clarify

only stakeboosted addresses need the excact amount of coins in 1 pile
and a scrape address is mandatory for them


any normal address dont need to sort their coins in a special way
and set a scrape address is optional

[cesmak]

@cryptonit

Donwloaded the new wallet, one question... is it normal that after first launch of the new version, is more than 2 hours that the wallet is on the splash screen with the status "Loading block index..." there is a sort of reindexing for the first launch of the new wallet ?

(Win 10 platform)....

Cheers

if same wallet.dat was active before and blockchain sync

u just stop wallet 2.0.5.7 and start wallet 2.1.0.1
no bigger startup time is to be expected

if u use a wallet.dat from a backup
it easy possible it need some time at first startup

at second start should be as fast as normal

Upgraded the exe as you told us, on the live wallet, stopped previous version, copied exe and started in a few minutes the new one, now i'am at more than 3 hours and still the same splash screen.....
You recommend to kill the process and restart again ?

[echo00114]

Wallet build for 2.1.0.1 on ArmV8 (aarch64) completed using Ubuntu 16.04LTS
Noticed a new address in Receive Coins, also what are Scrape Address ?

u can define a target address for POS rewards generated by a address

for normal addresses this is optional

for stake boosted addresses this is mandatory
or u destroy ur stakeboost ability after first POS block found
(because the size of coin pile no longer fit to boost size)

hello
sorry but i dont understand what settings the conf file doing this ?

i normaly upgrade wallet so no staking me ?

thx

[cesmak]

Quick update just finished now after more than 3 hours......

New wallet now active....

[lecaillou]

Hi, small bug, when I lock my wallet, the icon on the top still unlock...
But I see in the bottom that my wallet is encrypted and lock

[shveicar]

Hi, small bug, when I lock my wallet, the icon on the top still unlock...
But I see in the bottom that my wallet is encrypted and lock

This is not quite true.
If you unlock your wallet with a note only for minting the icon does not change because the wallet is closed for outgoing transactions.
What would make outbound transaction, you will need to enter a password.
But if you unlock your wallet in full (without notes only for minting)



the icon will change and your wallet will be fully open for outbound transactions.

[cryptonit]

@cryptonit

Donwloaded the new wallet, one question... is it normal that after first launch of the new version, is more than 2 hours that the wallet is on the splash screen with the status "Loading block index..." there is a sort of reindexing for the first launch of the new wallet ?

(Win 10 platform)....

Cheers

if same wallet.dat was active before and blockchain sync

u just stop wallet 2.0.5.7 and start wallet 2.1.0.1
no bigger startup time is to be expected

if u use a wallet.dat from a backup
it easy possible it need some time at first startup

at second start should be as fast as normal

Upgraded the exe as you told us, on the live wallet, stopped previous version, copied exe and started in a few minutes the new one, now i'am at more than 3 hours and still the same splash screen.....
You recommend to kill the process and restart again ?

interesting first user who report this behavior

as long as u have a backup of ur wallet.dat

nothing serious can happen even if u kill process and ur local blockchain got corrupted u can just start with a backup of chain

so choose whatever suits u better

leave it run over night and see what happens

or kill and try restart

if chain or wallet.dat got damage start with backup data

[cesmak]

As i  replied after that a couple of posts down at the end wallet started... probably is a problem of pc performances, low ram (2Gb.) and a dual core processor....

Bacause i made other two restarts and time remains high... not so high as the first but took always more than an hour in the second and third restart.

On that pc there are also other 4 staking coin wallets, so probably a little overloaded....

Next week ram will be updated to 8Gb. and i will see if the startup performances remains the same or improve.

Thanks.

[cryptonit]

As i  replied after that a couple of posts down at the end wallet started... probably is a problem of pc performances, low ram (2Gb.) and a dual core processor....

Bacause i made other two restarts and time remains high... not so high as the first but took always more than an hour in the second and third restart.

On that pc there are also other 4 staking coin wallets, so probably a little overloaded....

Next week ram will be updated to 8Gb. and i will see if the startup performances remains the same or improve.

Thanks.

i guess thats not only RAM (but sure upgrade to a bit more that 2 GB is for sure a great idea)

startup time are mostly related to HDD speed

a SSD helps a lot

[cryptonit]

Hi, small bug, when I lock my wallet, the icon on the top still unlock...
But I see in the bottom that my wallet is encrypted and lock

we did mention that in release notes

thats part of the security fix
that if u unlock for minting only

the wallet gui part now stay in locked mode (only backend unlocked for minting)

that the lock symbol name the carry wrong name is a minor issue

the security fix was of way higher value



if u minting mode now or not u can see by the color of the diamond symbol bottom right

if its blue u have mature coins and ur wallet try to claim a POS block


when u unlock wallet it can need up to 60 sec until the diamond change color to blue

if he stay grey u have maybe no coins that are older than 9 days
or u have maybe in conf a reservebalance=999999 active which in fact is the same as disable POS

[cryptonit]

i normaly upgrade wallet so no staking me ?

thx

nothing changed for u

u start wallet unlock for minting and ur wallet try to forge a POS block
if u have coins old enough to be able claim POS rewards

same behavior as always

[cryptonit]

nice over 60% of wallets already upgraded

[BogdanCo]

As i  replied after that a couple of posts down at the end wallet started... probably is a problem of pc performances, low ram (2Gb.) and a dual core processor....

Bacause i made other two restarts and time remains high... not so high as the first but took always more than an hour in the second and third restart.

On that pc there are also other 4 staking coin wallets, so probably a little overloaded....

Next week ram will be updated to 8Gb. and i will see if the startup performances remains the same or improve.

Thanks.

Buy a SSD, it's the best investment in order to have a faster time loading for the wallets. I have also one and compared to the old HDD it's 10 time faster

[Galactus]

cryptonit

for what this reactors.dat file?

and I have only 1 active connection. but after the run was 2 and 3, then 1 again.
peers.dat deleted before launch new wallet.
delete nodes does not change the situation.

UPD : currently 6 active connections with nodes in the conf file.

[BogdanCo]

cryptonit

for what this reactors.dat file?

and I have only 1 active connection. but after the run was 2 and 3, then 1 again.
peers.dat deleted before launch new wallet.
delete nodes does not change the situation.

UPD : currently 6 active connections with nodes in the conf file.

Here is a list of nodes from my dmd conf file:

addnode=193.68.21.19
addnode=54.191.208.14
addnode=54.255.133.30
addnode=54.86.164.216
addnode=167.114.184.20
addnode=37.187.176.193
addnode=93.89.139.77
addnode=213.229.0.41
addnode=193.136.96.30
addnode=193.136.97.30
addnode=169.53.162.84

With this conf I have 14 connections. Hope it will be the same for you. 

[Galactus]

BogdanCo

I have the same nodes

now 9 active connections
12
11
Why is it not stable these connections.

[cryptonit]

3 days to update ur wallet!

i will repeat this news on each new BTT thread page until 15th may
so noone miss the MANDATORY WALLET UPGRADE

Dear Diamond Community,

Thank you for your patience and understanding. Software development yet again proved to be a lengthy and complicated process, but we are finally releasing the new instalment of our beloved DMD Diamond wallet. As this long awaited release is now out, we set our goals and aspirations to delivering you Diamond 3.0 in the coming months. But for now, we hope you’ll enjoy this new software as much as we do.

And of course this release is also dedicated to all those who are holders of Legendary 10 Unique Cypto Assets. Their investment helped to push the sails of DMD Diamond ship to the new seas of opportunity and development. It’s the dawn of the Legends!

This release packs several exciting improvements:

- The bug that allowed for sending transactions in ‘unlocked for minting’ mode has been fixed. Now you need to enter a password each time you want to send coins.
However, as a known side effect of the fix, when unlocking the wallet in ‘unlocked for minting’ mode the lock button icon will stay "locked" at all times. If you press the unlock button the second time it would act correctly and will lock the wallet.
- Group stake trigger value increased from 100DMD to 150DMD which allows minting more old small coin piles faster.
- Scrape address functionality has been added (it allows setting up a target address for PoS rewards). A new target address (can be allocated separately to each address) can be set in GUI under the Receive Coins tab. It can be changed by double clicking on scrape address column. Please mind that if you change scrape addresses you need to restart the wallet for the changes to take effect.
- Stake Boost code implemented for Legendary 10 addresses and time limited promotion addresses which would go active on Tuesday 15 May 2016 12:00:00 UTC.
- PoW coin support share (0.01 DMD each block) has been removed and replaced with a coin support stake boosted address for similar effect.
- Automated coin selection for TX and minting, additional input is optimized for optimal utilisation of coin age.
- The code to enable same mining behaviour as [GRS] GroestlCoin was implemented but set to inactive due to community feedback and our long term fundamental developmental shift planned for DMD Diamond 3.0.
- The estimated ‘time to mint’ tool tip has been removed.
- Updated wallet version to 2.1.0.1.
- Newest OpenSSL has been used.
 
Please note that this update is mandatory with the fork date set to 15 May 2016 or more precisely everyone should update before block 1549200.
Please see Block Explorer for the current block height: https://chainz.cryptoid.info/dmd/

MINING POOLS: You need to adapt your pool software and remove coin support share after block 1549200.

LEGENDARY 10 holders: Please do not start minting before 16th May. After that date glorious days lay ahead and you can finally enjoy the boosted staking.
 
Source: https://github.com/DMDcoin/Diamond
Windows QT: https://github.com/DMDcoin/Diamond/releases/download/Diamond2101/diamond-qt-2101.zip

Long live DMD Diamond!
Enjoy!

[cryptonit]

cryptonit

for what this reactors.dat file?

and I have only 1 active connection. but after the run was 2 and 3, then 1 again.
peers.dat deleted before launch new wallet.
delete nodes does not change the situation.

UPD : currently 6 active connections with nodes in the conf file.

give it some time with the connections
will take some time until everyone did upgrade

reaktors.dat is the database file of stakeboosted addresses
every wallet in network have to know the addresses
this way noone can fake to be boosted
because every wallet know the truth

[BogdanCo]

BogdanCo

I have the same nodes

now 9 active connections
12
11
Why is it not stable these connections.

I have now 20. I think it depends on the people opening/closing the node wallets.

[sirazimuth]

upgraded and synched no issues.
thanx man