[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65%

[preda]

In multipool you mine with nicehash and it converts bitcoin earned into dmd coins?
And if you use ccminer instead? You will get dmd directly?
This pool is support already the third version or better we wait after September for all updates?

[cryptonit]

In multipool you mine with nicehash and it converts bitcoin earned into dmd coins?
And if you use ccminer instead? You will get dmd directly?
This pool is support already the third version or better we wait after September for all updates?

In multipool you mine with nicehash and it converts bitcoin earned into dmd coins?

this

there is no more public known pools who mine DMD
age of mining ends last few days only solo mining
the decision was made by pool operators
to allow former miners withdraw coins in time pre DMDv2 snapshot on september 13th from pool

last dmd v2 multipool payout will be on 8th september and first payout in DMDv3 is estimated to be on 16th september

[Mognar69]

Hi.

I know there is only a week left, but I wanted to mine some DmD using Nicehash and DMD multipool and need some assistance setting up my local.conf in ethOS.

I was able to get my rig to connect and mine, but for some reason, the hash rate keeps dropping down to 0 after 10 minutes or so.

I'm using ethOS and six GTX 1070's. The hash rate for the rig starts at 190 and then drops to 0... I'm getting and submitting jobs until that time when it just goes to receiving jobs.

Here are my settings, if anyone can assist, I would be truly grateful... I've been pulling my hair out for hours trying to figure out the problem.

stratumproxy nicehash
proxywallet "my DMD pool BTC address"
proxypool1 equihash.usa.nicehash.com:3337
proxypool2 equihash.eu.nicehash.com:3337

globalminer ethminer

I'm sure it's something I'm missing or misconfigured. Thanks for your help!

Mog

[MetalHelmet]

there is no more public known pools who mine DMD
age of mining ends last few days only solo mining
the decision was made by pool operators
to allow former miners withdraw coins in time pre DMDv2 snapshot on september 13th from pool

last dmd v2 multipool payout will be on 8th september and first payout in DMDv3 is estimated to be on 16th september

So, do I correctly understand - now there is NO WAY to mine directly DMD using ccminer (with dmd-gr algo) through pool ?
Just one way - mine via NiceHash (any algo) and direct payments to BTC address for mining provided https://multipool.bit.diamonds/ after registering you DMD address  

But in that case I will get revenue counting NiceHash rates in BTC (smth called Nicehash-NeoScrypt / Nicehash-Equihash / Nicehash-Ethash ) and then just simply "bought" from BTC to DMD by current exchange rate ?

[cryptonit]

there is no more public known pools who mine DMD
age of mining ends last few days only solo mining
the decision was made by pool operators
to allow former miners withdraw coins in time pre DMDv2 snapshot on september 13th from pool

last dmd v2 multipool payout will be on 8th september and first payout in DMDv3 is estimated to be on 16th september

So, do I correctly understand - now there is NO WAY to mine directly DMD using ccminer (with dmd-gr algo) through pool ?
Just one way - mine via NiceHash (any algo) and direct payments to BTC address for mining provided https://multipool.bit.diamonds/ after registering you DMD address  

But in that case I will get revenue counting NiceHash rates in BTC (smth called Nicehash-NeoScrypt / Nicehash-Equihash / Nicehash-Ethash ) and then just simply "bought" from BTC to DMD by current exchange rate ?

its just for the people who wana save time to convert by themself yes
its a free service we provide to community we add no fees on top of the 2% mining fee at nicehash
the convert to DMD happens on average every 2 days not instant

[cryptonit]

Hi.

I know there is only a week left, but I wanted to mine some DmD using Nicehash and DMD multipool and need some assistance setting up my local.conf in ethOS.

I was able to get my rig to connect and mine, but for some reason, the hash rate keeps dropping down to 0 after 10 minutes or so.

I'm using ethOS and six GTX 1070's. The hash rate for the rig starts at 190 and then drops to 0... I'm getting and submitting jobs until that time when it just goes to receiving jobs.

Here are my settings, if anyone can assist, I would be truly grateful... I've been pulling my hair out for hours trying to figure out the problem.

stratumproxy nicehash
proxywallet "my DMD pool BTC address"
proxypool1 equihash.usa.nicehash.com:3337
proxypool2 equihash.eu.nicehash.com:3337

globalminer ethminer

I'm sure it's something I'm missing or misconfigured. Thanks for your help!

Mog

hi mog

just mine eth normal and convert them manual
seek mining eth help at proper eth forums

most of our dmd multipool miners use the windows nicehashminer software
which basically easy configure itself

[firesec]

Hi guys,

I'm planning to do some mining for these last days of POW but I didn't mine dmd-groestl before.
What OC settings do you use for 1070 and 1080ti ?

[Galactus]

Whether correctly I understand - pos v.2 will be accessible till 12 september inclusive? at the end of the 12th day, can turn off the wallet and prepare it for the transition to dmd v.3?

[cryptonit]

Whether correctly I understand - pos v.2 will be accessible till 12 september inclusive? at the end of the 12th day, can turn off the wallet and prepare it for the transition to dmd v.3?

http://bit.diamonds/DMD_2.0_to_3.0_guide.pdf

[Galactus]

Whether correctly I understand - pos v.2 will be accessible till 12 september inclusive? at the end of the 12th day, can turn off the wallet and prepare it for the transition to dmd v.3?

http://bit.diamonds/DMD_2.0_to_3.0_guide.pdf

means until September 11 inclusive

[irlandescoin]

it is any pool for this?

it is giving 12 dolares more than eth per day for my rigs.

[Mr1k]

Where's the wallet? stable, ...right?
When? ...
We are done testing,... Right?
10 days to get the network dialed in,... right?

[shveicar]

Where's the wallet? stable, ...right?
When? ...
We are done testing,... Right?
10 days to get the network dialed in,... right?

Do not panic 
In most cases, the update will be to simply move your current wallet.dat file to a new wallet.
If you are wondering what the new wallet looks like, you can join our #Slack channel to check it on your own PC.

[Mr1k]

Where's the wallet? stable, ...right?
When? ...
We are done testing,... Right?
10 days to get the network dialed in,... right?

Do not panic 
In most cases, the update will be to simply move your current wallet.dat file to a new wallet.
If you are wondering what the new wallet looks like, you can join our #Slack channel to check it on your own PC.

I'll wait...
Pretty is as pretty does..
I'm about function not fashion..
I screwed up,I did method 1,
two years ago.

[MercuryProtocol]

Pretty interesting idea perhaps, Im just wondering if something like this would actually be successful in a year or so. Anyway to prove this? Or is the burden of research on me? Thanks!

[shveicar]

Pretty interesting idea perhaps, Im just wondering if something like this would actually be successful in a year or so. Anyway to prove this? Or is the burden of research on me? Thanks!

The best proof is a working system.
We thoroughly test it and see that it works fine.
But this will not be the only update that will remain for many years.
This is just one of the steps to moving to a new level of development and gaining some additional opportunities for the organization of services and operation based on Diamond.
If you read the White Paper then you will understand what I'm talking about 

[speedyb]

is Diamond
(DMD) early enough to solo mine with 3 gpu's and still be profitable? or would it be better to pool mine? any suggestions

[Dr.Cupido]

is Diamond
(DMD) early enough to solo mine with 3 gpu's and still be profitable? or would it be better to pool mine? any suggestions

Poolmining is disabled since yesterday. The only way is to solo mine. Yes its profitable with 3 gpus. Remember that on september 12th a snapshot is taken. every coin u mine after this point is lost.

[jimsonunique]

Will my orphaned transactions be lost when it switches over to v3? It's been nearly a week and I haven't received any coins I've minted..

[shveicar]

Will my orphaned transactions be lost when it switches over to v3? It's been nearly a week and I haven't received any coins I've minted..

Unconfirmed POS minted (orphan) blocks mean no real income.
They will not be confirmed and moved to DMD v 3.0