[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65%

[The Prophet]

Now I did the import/export way instead of wallet.dat copying. No error, but 99% of my coins immature. Is that normal?

[1715413887]

1715413887

[1715413887]

1715413887

[1715413887]

1715413887

[tanakan]

I need guides for setup masternode service with TOR asap... When will you publish guides?

[jimsonunique]

I've managed to retrieve my dmd that went missing. But still not staking. It says staking is not active. Coins have been in for 2 hours now. I keep reading about unlocking the wallet but don't know how to do this

[Flep182]

I've managed to retrieve my dmd that went missing. But still not staking. It says staking is not active. Coins have been in for 2 hours now. I keep reading about unlocking the wallet but don't know how to do this

I couldn't find the unlock button either, after waiting 1,5 hours it started with me. Got the first result in already, 0,008 DMD Probably leave it open overnight.

[Galactus]

Please do not forget about the guides on Russian for MN+POS

[wiser]

So I sent coins to myself to have a single input yesterday. It has been over 25 hours and my wallet is unlocked and it's still indicating that staking is not active. I have activated multisend if that makes a difference. Is there anything I have to do besides unlock the wallet for staking in order to be actively staking? Please let me know. Thanks

[Woody20285]

So I sent coins to myself to have a single input yesterday. It has been over 25 hours and my wallet is unlocked and it's still indicating that staking is not active. I have activated multisend if that makes a difference. Is there anything I have to do besides unlock the wallet for staking in order to be actively staking? Please let me know. Thanks

If you sent the coins to yourself that could be the problem. V3 is a new chain. Review the guide in the OP (Post 1).
Best method is to dumpprivkey in V2 and then, importprivkey in V3.

[shveicar]

Please do not forget about the guides on Russian for MN+POS

I have already posted several English instructions in one archive on this forum.
forum link
Later I will make a separate instruction for running MN TOR on the Windows with two VMware

[bitChipper]

Does anybody have news about when Bittrex is going to re-open DMD for deposits?

hopefully today, they told dev in a couple hours

[Galactus]

Please do not forget about the guides on Russian for MN+POS

I have already posted several English instructions in one archive on this forum.
forum link
Later I will make a separate instruction for running MN TOR on the Windows with two VMware

English does not help
Need on russian for Win MN+POS

[Slydrule]

So I sent coins to myself to have a single input yesterday. It has been over 25 hours and my wallet is unlocked and it's still indicating that staking is not active. I have activated multisend if that makes a difference. Is there anything I have to do besides unlock the wallet for staking in order to be actively staking? Please let me know. Thanks

If you sent the coins to yourself that could be the problem. V3 is a new chain. Review the guide in the OP (Post 1).
Best method is to dumpprivkey in V2 and then, importprivkey in V3.

It better not be a problem because that is exactly what the instructions say we can do.  In fact, the first transition guide recommended it.  It said to consolidate coins to one address by sending the coins to that address (instruction on how to do it were in the guide).  Then dump the private key of the one address and import that key back into the V3 wallet.

Can someone provide a definitive answer on this?  I  also sent coins to myself to get everything into a single address.  Of course when I imported the private key for the single address it did not recover all my coins but I was able to resolve that.  My wallet says staking is active but I have seen nothing happen in over 14 hours.  This could be normal but since someone else is having a problem I'd like confirmation that there is or is not an issue.

Thanks.

[shveicar]

So I sent coins to myself to have a single input yesterday. It has been over 25 hours and my wallet is unlocked and it's still indicating that staking is not active. I have activated multisend if that makes a difference. Is there anything I have to do besides unlock the wallet for staking in order to be actively staking? Please let me know. Thanks

If you sent the coins to yourself that could be the problem. V3 is a new chain. Review the guide in the OP (Post 1).
Best method is to dumpprivkey in V2 and then, importprivkey in V3.

It better not be a problem because that is exactly what the instructions say we can do.  In fact, the first transition guide recommended it.  It said to consolidate coins to one address by sending the coins to that address (instruction on how to do it were in the guide).  Then dump the private key of the one address and import that key back into the V3 wallet.

Can someone provide a definitive answer on this?  I  also sent coins to myself to get everything into a single address.  Of course when I imported the private key for the single address it did not recover all my coins but I was able to resolve that.  My wallet says staking is active but I have seen nothing happen in over 14 hours.  This could be normal but since someone else is having a problem I'd like confirmation that there is or is not an issue.

Thanks.

How many coins do participate in POS minting?

[wiser]

So I sent coins to myself to have a single input yesterday. It has been over 25 hours and my wallet is unlocked and it's still indicating that staking is not active. I have activated multisend if that makes a difference. Is there anything I have to do besides unlock the wallet for staking in order to be actively staking? Please let me know. Thanks

If you sent the coins to yourself that could be the problem. V3 is a new chain. Review the guide in the OP (Post 1).
Best method is to dumpprivkey in V2 and then, importprivkey in V3.

I sent them to myself using the V3 wallet. I had no problems with the transaction and all my coins are where I want them. The part I have a problem with is that the wallet tells me staking is inactive. I was under the impression you just had to wait 25 hours from a new input for it to start minting, and that's not happening. So what else do I need to do?

[cesmak]

To stake coins, i had to unlock the wallet, elsewhere, (for what i saw) it remains in non staking mode.

[tanakan]

Please do not forget about the guides on Russian for MN+POS

I have already posted several English instructions in one archive on this forum.
forum link
Later I will make a separate instruction for running MN TOR on the Windows with two VMware

English does not help
Need on russian for Win MN+POS

Thank you!
Everything works fine for me. About stake, when i'm taking times to config masternode, my v3 wallet's staked. So I have to make new masternode address. I've forgot to set parameter reservebalance=999999 in config file.
Here is my wallet https://chainz.cryptoid.info/dmd/address.dws?dWYwo7dsJNFpeYcYjB9aAPamGKJnJ2LD18.htm.

[Slydrule]

Is there a minimum balance for POS staking?

Thanks.

[vella85]

Is there a minimum balance for POS staking?

Thanks.

I don't believe so as I have already earn my first stake with just over 300 coins. I will say this I think it's best to split my coins up into smaller blocks of say 100 coin blocks because I didn't know it will take 641 confirmations before my coins can stake again. So if I have 3 x 100 blocks I can still stake while the other block matures as right now I'm still waiting on my first stake to confirm with still over 200 confirmations to go.

I like to get the dev's answer or anyone else here is it okay with 100 coin blocks? or is that too small for DMD?

[cryptonit]

Is there a minimum balance for POS staking?

Thanks.

I don't believe so as I have already earn my first stake with just over 300 coins. I will say this I think it's best to split my coins up into smaller blocks of say 100 coin blocks because I didn't know it will take 641 confirmations before my coins can stake again. So if I have 3 x 100 blocks I can still stake while the other block matures as right now I'm still waiting on my first stake to confirm with still over 200 confirmations to go.

I like to get the dev's answer or anyone else here is it okay with 100 coin blocks? or is that too small for DMD?

use this consolecommand

setstakesplitthreshold 100


{
    "split stake threshold set to " : 100,
    "saved to wallet.dat " : "true"
}

this way u have coin piles between 100-200 dmd size automatic

if bigger they split if smaller they merge after some time (5 days)

replace 100 with whatever is ur desired number the coin pile in ur wallet will always over time structure to be in range of 1x to 2x that value

[pokeytex]

Ok - Little update.  Masternode is working flawlessly.  I suggest people check out https://node-vps.com/web/ - it is only $5 per node per month!  Chaositec is very knowledgeable.  I have been getting MN payments all day on this my first full day with a DMD mn!  Also, I just received my first stake on my stake wallet!  Good times....  Good times....

[vella85]

Is there a minimum balance for POS staking?

Thanks.

I don't believe so as I have already earn my first stake with just over 300 coins. I will say this I think it's best to split my coins up into smaller blocks of say 100 coin blocks because I didn't know it will take 641 confirmations before my coins can stake again. So if I have 3 x 100 blocks I can still stake while the other block matures as right now I'm still waiting on my first stake to confirm with still over 200 confirmations to go.

I like to get the dev's answer or anyone else here is it okay with 100 coin blocks? or is that too small for DMD?

use this consolecommand

setstakesplitthreshold 100


{
    "split stake threshold set to " : 100,
    "saved to wallet.dat " : "true"
}

this way u have coin piles between 100-200 dmd size automatic

if bigger they split if smaller they merge after some time (5 days)

replace 100 with whatever is ur desired number the coin pile in ur wallet will always over time struckture to be in the range if 1x to 2x that value

Thank you cryptonit!

I didn't know DMD had this feature as most POS coins don't have this feature. This saves me time splitting the blocks manually so thank you. So 100 coin blocks should be fine staking DMD? I thought maybe 100 DMD coin blocks would be too small to stake?