M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner

[00pmac00]

I discovered about 10 minutes ago as well 2 of the mners (one of which was the one giving the error) had the same hostname. I doubt that makes a difference, but I havechanged it to what it is supposed to be. I'll let you know how it goes either sometime tonight or when I get up in the morning when I see how its doing.

Thanks. 

[1714898775]

1714898775

[1714898775]

1714898775

[1714898775]

1714898775

[mdude77]

I discovered about 10 minutes ago as well 2 of the mners (one of which was the one giving the error) had the same hostname. I doubt that makes a difference, but I havechanged it to what it is supposed to be. I'll let you know how it goes either sometime tonight or when I get up in the morning when I see how its doing.

Thanks. 

I set it to reboot every upcoming hour for a few hours in a row to make sure it worked.  Hopefully I got it all right this time.

M

[mdude77]

Here's version 3.8.

This version adds proper support for C1s, and fixes some minor issues for the Ant scanning logic.

Also, note that today I'm selling my last S1.  After this version there's no guarantee S1s will work properly (but they should).

Download link: MAntMonitor38.zip

M

[opentoe]

Thanks, nice utility. I have a quick question. It found both my C1's fine. I named them, click save and then went to the AntOutput page and it is grabbing data already but I never put in a password in the config area. I did change the PW to a different one. How is the program accessing the C1's without a password? I only changed the WebUI password, I left the SSH password default. Is that how it is getting the data?

I think the default is
user - root
pw   - admin

[mdude77]

Thanks, nice utility. I have a quick question. It found both my C1's fine. I named them, click save and then went to the AntOutput page and it is grabbing data already but I never put in a password in the config area. I did change the PW to a different one. How is the program accessing the C1's without a password? I only changed the WebUI password, I left the SSH password default. Is that how it is getting the data?

I think the default is
user - root
pw   - admin

Hello, the SSH password is only needed for SSH utils like rebooting or configuring pools.  Everything else can be done via the API across the network, as you observed.

Note that there isn't any web support for C1s currently.  Not sure if I'll add it or not.

M

[kkNft]

In version 3.8 for C1 does not work reboot manually.

[mdude77]

In version 3.8 for C1 does not work reboot manually.

Thanks, will take care of it!

M

[mdude77]

In version 3.8 for C1 does not work reboot manually.

I found a problem and I assume it's what your issue is.  If you have S1s or S3s, and then you auto detect your C1(s), it defaults to the wrong SSH password.  Please double check your C1s and make sure the SSH password is correct.  If you haven't changed it, it should be "admin" (not "root").

Here's version 3.9 to address that auto detect issue, as well another minor issue I've found since 3.8.

Download link: MAntMonitor39.zip

M

[kkNft]

In version 3.8 for C1 does not work reboot manually.

I found a problem and I assume it's what your issue is.  If you have S1s or S3s, and then you auto detect your C1(s), it defaults to the wrong SSH password.  Please double check your C1s and make sure the SSH password is correct.  If you haven't changed it, it should be "admin" (not "root").

Here's version 3.9 to address that auto detect issue, as well another minor issue I've found since 3.8.

Download link: MAntMonitor39.zip

M

Thank you )

[727miner]

mdude, any chance you might support the SP20 in your monitor?

[mdude77]

mdude, any chance you might support the SP20 in your monitor?

Funny you should ask.  I just got an SP20 today for just such a purpose.  And I mean, I didn't order it today, I received it today.  Haven't yet hooked it up..

M

[smilingloki]

mdude, any chance you might support the SP20 in your monitor?

Funny you should ask.  I just got an SP20 today for just such a purpose.  And I mean, I didn't order it today, I received it today.  Haven't yet hooked it up..

M

SHIT THAT WAS FAST! so whats ur opinion of the SP35? 

[mdude77]

mdude, any chance you might support the SP20 in your monitor?

Funny you should ask.  I just got an SP20 today for just such a purpose.  And I mean, I didn't order it today, I received it today.  Haven't yet hooked it up..

M

SHIT THAT WAS FAST! so whats ur opinion of the SP35? 

So far I've heard two things about SPxx's:

1 - they are loud
2 - they are reliable and "just work"

This SP20 is my first.. so I don't have any experience yet.

M

[727miner]

mdude, any chance you might support the SP20 in your monitor?

Funny you should ask.  I just got an SP20 today for just such a purpose.  And I mean, I didn't order it today, I received it today.  Haven't yet hooked it up..

M

Awesome. I received my two at the beginning of this week. So far so good and they have been hashing away happily with no issues. Looking forward to your feedback, happy mining!

[smilingloki]

mdude, any chance you might support the SP20 in your monitor?

Funny you should ask.  I just got an SP20 today for just such a purpose.  And I mean, I didn't order it today, I received it today.  Haven't yet hooked it up..

M

SHIT THAT WAS FAST! so whats ur opinion of the SP35? 

So far I've heard two things about SPxx's:

1 - they are loud
2 - they are reliable and "just work"



M

Are they as loud as the S2's?

[smilingloki]

reason i ask, out of my 18 S3's - i wanna punch at least 7 of them, and kick at least 2 if i had the chance.

I am so sick to death of most of my S3's  I just want to have 2 x SP35's as long as they arent to belligerently noisy

Thanks for your help guys. Appreciate any advice

[mdude77]

reason i ask, out of my 18 S3's - i wanna punch at least 7 of them, and kick at least 2 if i had the chance.

I am so sick to death of most of my S3's  I just want to have 2 x SP35's as long as they arent to belligerently noisy

Thanks for your help guys. Appreciate any advice

Louder than an S2 I think.

SP35 is probably a good deal if you have the power to drive it.  If I were you I'd sell some S3s and get some SPxxs.

I'm also reading they are good underclockers, if you're into that.

I hope to revise to my app so that it works with all SPxxs.

M

[smilingloki]

reason i ask, out of my 18 S3's - i wanna punch at least 7 of them, and kick at least 2 if i had the chance.

I am so sick to death of most of my S3's  I just want to have 2 x SP35's as long as they arent to belligerently noisy

Thanks for your help guys. Appreciate any advice

Louder than an S2 I think.

SP35 is probably a good deal if you have the power to drive it.  If I were you I'd sell some S3s and get some SPxxs.

I'm also reading they are good underclockers, if you're into that.

I hope to revise to my app so that it works with all SPxxs.

M

Yep,

I'm thinking of getting 2 SP35's - gonna keep my S2's and 6 of the S3's that should give me about 15TH

[mdude77]

reason i ask, out of my 18 S3's - i wanna punch at least 7 of them, and kick at least 2 if i had the chance.

I am so sick to death of most of my S3's  I just want to have 2 x SP35's as long as they arent to belligerently noisy

Thanks for your help guys. Appreciate any advice

Louder than an S2 I think.

SP35 is probably a good deal if you have the power to drive it.  If I were you I'd sell some S3s and get some SPxxs.

I'm also reading they are good underclockers, if you're into that.

I hope to revise to my app so that it works with all SPxxs.

M

Yep,

I'm thinking of getting 2 SP35's - gonna keep my S2's and 6 of the S3's that should give me about 15TH

I would add that:

1 - definitely louder, however it defaults to running at 80% fan speed.  The Ants are pretty loud at 80% too.
2 - you have PSUs for your S3s.. so unless you intend to sell them too, maybe look at an SP that requires external PSUs?

M

[jackbox]

Anyone in Asia that has an S3 to sell at a good price send me a PM.