M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner

[ZymurBits]

Tried the shutdown a couple times again since there were some anomalies that occurred the first time around.  But the same issues happened again. 

When I issue the shutdown, the system display stops responding, fans go to full speed, not able to access via web or SSH.  Fans stay at high speed.  After 5 minutes, I manually shutdown the S4 then waited 1 minute to restart.  When I turn back on the system starts up never comes online (can't web or SSH into it even though network light is flashing).  After 5 minutes, I manually shutdown again, wait a minute and restart.  This time the system boots up and comes online normally.

It may have something to do with the firmware (20141016) I'm running as well that makes it behave that way.  It's not really that big of an issue to me since I never use the feature (I only use reboot).  I do like being able to set the alert thresholds specific for the S4 as well.

How about that "notification of a pending reboot" request. 

Thanks M!

[1714996847]

1714996847

[1714996847]

1714996847

[1714996847]

1714996847

[1714996847]

1714996847

[mdude77]

How about that "notification of a pending reboot" request. 

It's on my to do list.

Everything else for the S4 seems to be correct?

M

[ZymurBits]

Fantastic!  And everything else for the S4 seems to be working as expected.

[mdude77]

Here's version 4.0.  It's virtually unchanged from the last beta. 

Official change list:

v4.0
- Added support for Spondoolies' SP20.  Note this may work for other Spondoolie items.
- Fixed more problems with the "Scanning for miner" code.
- Added the ability to get unsupported miner info that can be reported to the author for additional miner support.
- Fixed the problem with the "reboot on error" getting inadvertently turned on.  It wasn't happening during startup, but in the Ant config.
- Fixed a logging problem with manually rebooting a miner.  It would display a number instead of the miner's name.
- Added support for Antminer S4 miners.

Download link: MMinerMonitor40.zip

Note that this is no longer called M's Ant Monitor.  At this point I'm open to adding support for any miner that uses cgminer.  Note that I can not and will not attempt to physically obtain every type of miner out there.  I need your help for this.  There's a "get miner info" button on the Miner Config tab in this app.  Use that to get the cgminer API output from your miner and PM it to me, and then I'll work on adding it as time allows.

M

[mdude77]

If you get an ugly error message when clicking "save" to add a new miner, try clicking "add" instead.  I don't handle the case properly when you're trying to save a new one.

M

[mdude77]

Here version 4.1 to fix the "save doesn't add" problem:

Download link: MMinerMonitor41.zip

M

[bittalc1]

hi i have problem with email notifications. i setup ssl connection on smtp.google.com and the app wont send notifications. it says email send failed

[mdude77]

hi i have problem with email notifications. i setup ssl connection on smtp.google.com and the app wont send notifications. it says email send failed

Are you certain the credentials and info entered are correct?

It's been a while since I've tested this, and I'm using the general Microsoft implementation for SMTP.  That's why it doesn't work with all vendors, because it mainly supports Microsoft stuff.

M

[manitu]

Hi Mdude,
I like your easy to use and usefull app. I run your latest version (4.1) with 20 Ant S4s. I have small issue with rebooting. After device is rebooted from monitor I have only 2/3 of usuall hashrate, but when I use cgminer restart everything is ok.
Would it be possible to add 3 new features?
One restart device on Xcount, second restart device on low/high hashrate alerts and third restart device by the uptime hits.
Reboot is fine once restart does not work.

Thx, Ivan.

[manitu]

in addition:
restart command is: /etc/init.d/cgminer.sh restart

[mdude77]

in addition:
restart command is: /etc/init.d/cgminer.sh restart

Nice idea! 

I'll see what I can do.

M

[smilingloki]

Hi there, got my new SP35 - HOLYYYY CRAP!!!!!!!!! THIS THING IS A BEAST!!!!

Mining Rate: 5448.39Ghs WOOOTTTT!
Temp Front / Back T,B
    34 °C / 84,86 °C

It honestly sounds like a Md-10 Turbine winding up though!  its is quite loud ! perhaps thee only drawback but whoa what a miner ! ROCK SOLID!

now how do i do that "get miner info" thing u were telling me about - would love to see this up on mantmonitor!  


Cheers

RJ

[mdude77]

Hi there, got my new SP35 - HOLYYYY CRAP!!!!!!!!! THIS THING IS A BEAST!!!!

Mining Rate: 5448.39Ghs WOOOTTTT!
Temp Front / Back T,B
    34 °C / 84,86 °C

It honestly sounds like a Md-10 Turbine winding up though!  its is quite loud ! perhaps thee only drawback but whoa what a miner ! ROCK SOLID!

now how do i do that "get miner info" thing u were telling me about - would love to see this up on mantmonitor!  


Cheers

RJ

Grats!

On the miner config tab, there's a button on the bottom right.  Did you try just using it as an SP20?

M

[smilingloki]

Hi there, got my new SP35 - HOLYYYY CRAP!!!!!!!!! THIS THING IS A BEAST!!!!

Mining Rate: 5448.39Ghs WOOOTTTT!
Temp Front / Back T,B
    34 °C / 84,86 °C

It honestly sounds like a Md-10 Turbine winding up though!   its is quite loud ! perhaps thee only drawback but whoa what a miner ! ROCK SOLID!

now how do i do that "get miner info" thing u were telling me about - would love to see this up on mantmonitor!  


Cheers

RJ

Grats!

On the miner config tab, there's a button on the bottom right.  Did you try just using it as an SP20?

M

Nup all new setup on the SP35 no config buttons here, let me show u
http://iforce.co.nz/i/xazbah3h.4kl.jpg

[mdude77]

Hi there, got my new SP35 - HOLYYYY CRAP!!!!!!!!! THIS THING IS A BEAST!!!!

Mining Rate: 5448.39Ghs WOOOTTTT!
Temp Front / Back T,B
    34 °C / 84,86 °C

It honestly sounds like a Md-10 Turbine winding up though!   its is quite loud ! perhaps thee only drawback but whoa what a miner ! ROCK SOLID!

now how do i do that "get miner info" thing u were telling me about - would love to see this up on mantmonitor!  


Cheers

RJ

Grats!

On the miner config tab, there's a button on the bottom right.  Did you try just using it as an SP20?

M

Nup all new setup on the SP35 no config buttons here, let me show u

I meant in my app!  

M

[mdude77]

Today I'm selling my last S3.  I intend to keep support for S3s in my app, but if something breaks, I'll need folks to supply me with the "get miner info" output from my app.

Thanks.

M

[mdude77]

Nup all new setup on the SP35 no config buttons here, let me show u

BTW the interface looks the same as on the SP20.  Hopefully it "just works" in my app.

M

[smilingloki]

Nup all new setup on the SP35 no config buttons here, let me show u

BTW the interface looks the same as on the SP20.  Hopefully it "just works" in my app.

M

Unable to get a responses from 192.168.1.101

hmmmmm ?

Sorry was using 2.6 updated to 4.1 now

[mdude77]

Nup all new setup on the SP35 no config buttons here, let me show u

BTW the interface looks the same as on the SP20.  Hopefully it "just works" in my app.

M

Unable to get a responses from 192.168.1.101

hmmmmm ?

Sorry was using 2.6 updated to 4.1 now

soo... it works?

M

[smilingloki]

Nup all new setup on the SP35 no config buttons here, let me show u

BTW the interface looks the same as on the SP20.  Hopefully it "just works" in my app.

M

Unable to get a responses from 192.168.1.101

hmmmmm ?

Sorry was using 2.6 updated to 4.1 now

soo... it works?

M

Negative - no joy - will not get any info.