M's Miner (Ant/SP) Monitor v5.2: alerts,auto/mass/scheduled reboot/mobile miner

[taipo]

That did it. Needs all three pools.

[mdude77]

That did it. Needs all three pools.

Excellent.  It never occurred to me to test for that.  I'll have to fix it in the next version.

(I assumed everyone would have 3 pools!!

M

[taipo]

I had three originally, the third was the slush proxy running on my other PC. But when the slush stratum proxy ceased working after patching the cgminer, I removed it - funny.

[ComaWombat]

Excellent.  It never occurred to me to test for that.  I'll have to fix it in the next version.

(I assumed everyone would have 3 pools!!

M

I managed to get one of my miners to show in the ants page after I added the IP to "trusted pages" list on my internet settings (IE11 Win8.1/64) and I only had two pools assigned in all of my ants.

When I added another IP in the trusted pages and tried again, the ants page remained empty once again. It's a bit weird.

But adding a third pool worked 100% fine so that's great! And thanks for a very, very useful program!

[Prelude]

Very nice looking program, but I can't get it running. Scanning finds my 5 ants, but they don't show up in the Ants page. Manually adding their IPs doesn't work either.

All 5 are running the latest firmware, default username/password, stock CGminer, API access enabled for CGremote, and overclocked to 400MHz.

Network looks like this:

192.168.1.x

My PC --> wired to router --> wireless bridge to garage --> bridged router to 8port switch --> 8 port switch to 2nd 8 port switch --> 5 ants

I can access them all normally through Firefox.

My app uses the Windows "browser" object to talk to the Ants.  That's Microsoft speak for imbedded internet explorer.  What version of IE do you have?  Are you able to get to your ants via IE?

M

Yes, I just successfully logged into them with IE 10. Is upgrading to 11 (or whatever the latest version is) worth a shot?

Edit: Just read the rest of the thread. Looks like the issue is having 3 pools filled in, and I only have 2. For some reason my ants won't let me access the pool management page, and I never had a good reason to look into it. I'll wait for your updated version that doesn't need all 3 to be filled in.

[Tikii]

Ok, here is a quick update.

So i have 7 Ants that i have specifically assigned IP to and none of them show up on the list.
I also have 5 Ants that have no specific IP assigned to them and they all show up on the list.

Maybe this helps somehow.

Can you give me an example?  What is an address that you've specifically assigned, and one that you haven't?

M

Ex: 192.168.120.201 to 207 are assigned and 192.168.120.101 to 105 are not assigned...

[kingscrown]

great share man!

[mdude77]

Ok, here is a quick update.

So i have 7 Ants that i have specifically assigned IP to and none of them show up on the list.
I also have 5 Ants that have no specific IP assigned to them and they all show up on the list.

Maybe this helps somehow.

Can you give me an example?  What is an address that you've specifically assigned, and one that you haven't?

M

Ex: 192.168.120.201 to 207 are assigned and 192.168.120.101 to 105 are not assigned...

did you get yours working?  Right now it doesn't work properly if you have less than 3 pools configured in your ant.  Put something in all 3, even if you're repeating them, and it should fine.

I intend to fix this in the next version.

M

[mdude77]

great share man!

tyvm.

M

[GaryL]

The software looks very good, thank you for your great work, I have a S1 at work, will try your software.

[freebit13]

For those that have a problem with it not working for your S1s, or all your S1s, please open an IE browser and try navigating to this URL:

http://<insert your ant's IP>/cgi-bin/luci/;stok=/admin/status/minerstatus/

eg:
http://192.168.0.99/cgi-bin/luci/;stok=/admin/status/minerstatus/

What you should get is the authentication page.  Enter the right credentials, then you should end up on the minerstatus page.

Let me know what happens when you try this.

M

FYI: the miner status page on the S2 is at: http://192.168.1.99/cgi-bin/minerStatus.cgi, just in case that might help you...

[xZork]

Great App! Thanks for this, donation sent. 

[mdude77]

Great App! Thanks for this, donation sent. 

Thank you!

M

[leptar]

Nice app buddy...

here is something else for you to fix...

If one of your chains on the S1 isn't working The S1 will not show up on your monitor..

[drukoz]

i still can't get it to work i have IE 11 and tried everthing

[mdude77]

i still can't get it to work i have IE 11 and tried everthing

Do you have all 3 pools populated?

M

[mdude77]

Nice app buddy...

here is something else for you to fix...

If one of your chains on the S1 isn't working The S1 will not show up on your monitor..

Hmm.  Can you post a screenshot of what you see in the mining status browser window?

M

[leptar]

ok, I installed some heatsinks on the DC's so i had to power them down... when i re-powered the ants your program refreshed it found that S1...


right now it's working...

[Trends]

mdude77 are you goin to offer selectable refresh rates?
I'd really like something in the 30-45 sec area as a choice.

[mdude77]

mdude77 are you goin to offer selectable refresh rates?
I'd really like something in the 30-45 sec area as a choice.

I am.  As a matter of fact I'm working on it right now.

M