[Minera v0.9.1] Your next mining dashboard - Antminer/CPUminer/CGminer/BFGminer

[Athomson]

they use the same (stratum), so if you have shares accepted, you can remove the solo pool as it was just there to verify your config

and it works:
http://solo.ckpool.org/users/1KMVTDhcwP6Yic9MgYjQLjaKfvaAFSyu7W

Thank you for the info., ZOu. I thought it was sorted but I went back to my shared pool, had the rig running for over 16 hours with 1913375 current shares but none have been accepted or rejected. Things seem to have stalled again, any ideas?

A section of my log shows:

[2016-11-14 08:36:08.310] Pool 0 successfully negotiated resume with the same session ID
[2016-11-14 08:36:08.310] Pool 0 difficulty changed to 256
[2016-11-14 08:36:08.311] Stratum from pool 0 requested work restart
[2016-11-14 08:36:11.780] Lost 1 shares due to no stratum share response from pool 0
[2016-11-14 08:37:01.781] Lost 2 shares due to no stratum share response from pool 0
[2016-11-14 08:37:16.781] Lost 1 shares due to no stratum share response from pool 0
[2016-11-14 08:37:38.474] Stratum connection to pool 0 interrupted
[2016-11-14 08:37:38.635] Pool 0 successfully negotiated resume with the same session ID
[2016-11-14 08:37:38.635] Pool 0 difficulty changed to 256
[2016-11-14 08:37:38.639] Stratum from pool 0 requested work restart

This does not look too good to me...
I have forwarded the log to slushpool support and asked them what could be wrong 

Andy

[1714923482]

1714923482

[1714923482]

1714923482

[1714923482]

1714923482

[paintballer4lfe]

So i'm not sure if this is a config issue on my end or what.

I have Minera 0.7 running on Ubuntu Server x64 and 4 gridseed 5 chips.
No matter what miner i run (bfg, cg, cgdmax, cpu) they all "run" not all of them hash but they all run if you check the log window.
However, cgdmax will hash and run but it shows that it is not running on the minera web interface.

I just have to run all 4 with the same settings. I even tried to run couminer with the auto tune function, did nothing.
Essentially everytime i try to use any miner it doesn't function with the basic settings of 5 chips and freq of 838.

I did follow the step by step instructions on the wesbite during install.
I built all of the miners with the build_miner.sh and did all at once.

Any ideas what to do or where to go from here?

UPDATE/EDIT: The gridseed's are hashing fineish with cgdmax miner, just doesn't show that it is running or the hash rate or anything. Heres the log:

Code:

 [2016-11-14 14:55:02] Started cgminer 4.3.5-scrypt.2
 [2016-11-14 14:55:02] Loaded configuration file /var/www/minera/conf/miner_conf.json
 [2016-11-14 14:55:02] Error in configuration file, partially loaded.
 [2016-11-14 14:55:02] Start cgminer with -T to see what failed to load.
 [2016-11-14 14:55:03] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:03] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID ttyACM0
 [2016-11-14 14:55:03] GSD0: System reseting
 [2016-11-14 14:55:03] GSD0: Set GC3355 core frequency to 838 MHz
 [2016-11-14 14:55:03] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:03] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID ttyACM1
 [2016-11-14 14:55:03] GSD1: System reseting
 [2016-11-14 14:55:04] GSD1: Set GC3355 core frequency to 838 MHz
 [2016-11-14 14:55:04] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:04] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID ttyACM2
 [2016-11-14 14:55:04] GSD2: System reseting
 [2016-11-14 14:55:04] GSD2: Set GC3355 core frequency to 838 MHz
 [2016-11-14 14:55:04] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:04] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID ttyACM3
 [2016-11-14 14:55:04] GSD3: System reseting
 [2016-11-14 14:55:05] GSD3: Set GC3355 core frequency to 838 MHz
 [2016-11-14 14:55:05] GridSeed GSD0 opened on usb:/dev/ttyACM0
 [2016-11-14 14:55:05] GridSeed GSD1 opened on usb:/dev/ttyACM1
 [2016-11-14 14:55:05] GridSeed GSD2 opened on usb:/dev/ttyACM2
 [2016-11-14 14:55:05] GridSeed GSD3 opened on usb:/dev/ttyACM3
 [2016-11-14 14:55:05] Probing for an alive pool
 [2016-11-14 14:55:05] Pool 1 difficulty changed to 16384
 [2016-11-14 14:55:05] Pool 2 difficulty changed to 16384
 [2016-11-14 14:55:05] Pool 4 difficulty changed to 16384
 [2016-11-14 14:55:05] Pool 1 difficulty changed to 1536
 [2016-11-14 14:55:05] Switching to pool 1 stratum+tcp://us-east.multipool.us:7777 - first alive pool
 [2016-11-14 14:55:05] Pool 2 difficulty changed to 1536
 [2016-11-14 14:55:05] Pool 4 difficulty changed to 1536
 [2016-11-14 14:55:05] Pool 3 difficulty changed to 256
 [2016-11-14 14:55:05] Pool 0 difficulty changed to 256
 [2016-11-14 14:55:05] Network diff set to 58.6K
 [2016-11-14 14:55:05] Pool 0 stratum+tcp://gridseed.give-me-coins.com:4256 alive, testing stability
 [2016-11-14 14:55:05] Switching to pool 0 stratum+tcp://gridseed.give-me-coins.com:4256
 [2016-11-14 14:55:09] Network diff set to 66
 [2016-11-14 14:55:09] Stratum from pool 1 detected new block
 [2016-11-14 14:55:11] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:15] Accepted 5acab6fe Diff 722/256 GSD 2 pool 0 
 [2016-11-14 14:55:17] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:21] Accepted 515fad55 Diff 805/256 GSD 2 pool 0 
 [2016-11-14 14:55:24] Accepted 7f99e265 Diff 514/256 GSD 2 pool 0 
 [2016-11-14 14:55:28] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:35] Accepted 628de7ac Diff 665/256 GSD 2 pool 0 
 [2016-11-14 14:55:35] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:40] Stratum from pool 0 requested work restart

[GatekeeperZA]

Im also starting to have the same issue but only with cgmax and bfgminer.

So i'm not sure if this is a config issue on my end or what.

I have Minera 0.7 running on Ubuntu Server x64 and 4 gridseed 5 chips.
No matter what miner i run (bfg, cg, cgdmax, cpu) they all "run" not all of them hash but they all run if you check the log window.
However, cgdmax will hash and run but it shows that it is not running on the minera web interface.

I just have to run all 4 with the same settings. I even tried to run couminer with the auto tune function, did nothing.
Essentially everytime i try to use any miner it doesn't function with the basic settings of 5 chips and freq of 838.

I did follow the step by step instructions on the wesbite during install.
I built all of the miners with the build_miner.sh and did all at once.

Any ideas what to do or where to go from here?

UPDATE/EDIT: The gridseed's are hashing fineish with cgdmax miner, just doesn't show that it is running or the hash rate or anything. Heres the log:

Code:

 [2016-11-14 14:55:02] Started cgminer 4.3.5-scrypt.2
 [2016-11-14 14:55:02] Loaded configuration file /var/www/minera/conf/miner_conf.json
 [2016-11-14 14:55:02] Error in configuration file, partially loaded.
 [2016-11-14 14:55:02] Start cgminer with -T to see what failed to load.
 [2016-11-14 14:55:03] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:03] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID ttyACM0
 [2016-11-14 14:55:03] GSD0: System reseting
 [2016-11-14 14:55:03] GSD0: Set GC3355 core frequency to 838 MHz
 [2016-11-14 14:55:03] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:03] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID ttyACM1
 [2016-11-14 14:55:03] GSD1: System reseting
 [2016-11-14 14:55:04] GSD1: Set GC3355 core frequency to 838 MHz
 [2016-11-14 14:55:04] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:04] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID ttyACM2
 [2016-11-14 14:55:04] GSD2: System reseting
 [2016-11-14 14:55:04] GSD2: Set GC3355 core frequency to 838 MHz
 [2016-11-14 14:55:04] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:04] Gridseed device found, firmware v01140113, driver v3.8.5.20140210.02, ID ttyACM3
 [2016-11-14 14:55:04] GSD3: System reseting
 [2016-11-14 14:55:05] GSD3: Set GC3355 core frequency to 838 MHz
 [2016-11-14 14:55:05] GridSeed GSD0 opened on usb:/dev/ttyACM0
 [2016-11-14 14:55:05] GridSeed GSD1 opened on usb:/dev/ttyACM1
 [2016-11-14 14:55:05] GridSeed GSD2 opened on usb:/dev/ttyACM2
 [2016-11-14 14:55:05] GridSeed GSD3 opened on usb:/dev/ttyACM3
 [2016-11-14 14:55:05] Probing for an alive pool
 [2016-11-14 14:55:05] Pool 1 difficulty changed to 16384
 [2016-11-14 14:55:05] Pool 2 difficulty changed to 16384
 [2016-11-14 14:55:05] Pool 4 difficulty changed to 16384
 [2016-11-14 14:55:05] Pool 1 difficulty changed to 1536
 [2016-11-14 14:55:05] Switching to pool 1 stratum+tcp://us-east.multipool.us:7777 - first alive pool
 [2016-11-14 14:55:05] Pool 2 difficulty changed to 1536
 [2016-11-14 14:55:05] Pool 4 difficulty changed to 1536
 [2016-11-14 14:55:05] Pool 3 difficulty changed to 256
 [2016-11-14 14:55:05] Pool 0 difficulty changed to 256
 [2016-11-14 14:55:05] Network diff set to 58.6K
 [2016-11-14 14:55:05] Pool 0 stratum+tcp://gridseed.give-me-coins.com:4256 alive, testing stability
 [2016-11-14 14:55:05] Switching to pool 0 stratum+tcp://gridseed.give-me-coins.com:4256
 [2016-11-14 14:55:09] Network diff set to 66
 [2016-11-14 14:55:09] Stratum from pool 1 detected new block
 [2016-11-14 14:55:11] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:15] Accepted 5acab6fe Diff 722/256 GSD 2 pool 0 
 [2016-11-14 14:55:17] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:21] Accepted 515fad55 Diff 805/256 GSD 2 pool 0 
 [2016-11-14 14:55:24] Accepted 7f99e265 Diff 514/256 GSD 2 pool 0 
 [2016-11-14 14:55:28] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:35] Accepted 628de7ac Diff 665/256 GSD 2 pool 0 
 [2016-11-14 14:55:35] GridSeed options: 'freq=838,chips=5'
 [2016-11-14 14:55:40] Stratum from pool 0 requested work restart

[toptek]

when you installed minera did you use Ubuntu 16 ?.  if so, the problem may be with the PHP in Ubuntu 16 you have use php 7.0 . i was having kind of the same issue . I made up my own install_minera.sh
 and do manual installs no issue now  but one bfg doesn't auto start but no big deal, i just  haven't got around to fixing it . here's is my install_minera.sh

with the corrected php for Ubuntu 16.4.1 installs. my install_minera.sh file installs no mining software other then maybe cpuminer, i replace BFG with my own version with the cp command.

Code:

#!/bin/bash
# This is the main install script for Minera https://github.com/michelem09/minera
# This script, as Minera, is intended to be used on a Debian-like system

echo -e "-----\nSTART Minera Install script\n-----\n"

echo -e "-----\nInstall extra packages\n-----\n"
apt-get -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" install -y build-essential libtool libcurl4-openssl-dev libjansson-dev libudev-dev libncurses5-dev autoconf automake postfix redis-server git screen php7.0-cli php7.0-curl php7.0-fpm php7.0-readline php7.0-json wicd-curses uthash-dev libmicrohttpd-dev libevent-dev libusb-1.0-0-dev libusb-dev libblkmaker-0.1-dev shellinabox supervisor lighttpd

echo -e "Adding Minera user\n-----\n"
adduser minera --gecos "" --disabled-password
echo "minera:minera" | chpasswd

echo -e "Adding groups to Minera\n-----\n"
usermod -a -G dialout,plugdev,tty,www-data minera

echo -e "Adding sudoers configuration for www-data and minera users\n-----\n"
echo -e "\n#Minera settings\nminera ALL = (ALL) NOPASSWD: ALL\nwww-data ALL = (ALL) NOPASSWD: ALL" >> /etc/sudoers

MINER_OPT="--gc3355-detect --gc3355-autotune --freq=850 -o stratum+tcp://ltc.ghash.io:3333 -u michelem.minera -p x --retries=1"
MINER_BIN=`pwd`"/minera-bin/"
MINERA_LOGS="/var/log/minera"
MINERA_CONF=`pwd`"/conf"
MINERA_OLD_LOGS=`pwd`"/application/logs"

echo -e "Adding SSL certificate\n-----\n"
mkdir /etc/lighttpd/certs
cp $MINERA_CONF/lighttpd.pem /etc/lighttpd/certs/
chmod 400 /etc/lighttpd/certs/lighttpd.pem

echo -e "Copying Lighttpd conf\n-----\n"
cp $MINERA_CONF/lighttpd.conf /etc/lighttpd/
cp $MINERA_CONF/10-fastcgi.conf /etc/lighttpd/conf-available/10-fastcgi.conf
cp $MINERA_CONF/15-php7.0-fpm.conf /etc/lighttpd/conf-available/15-php7.0-fpm.conf
ln -s /etc/lighttpd/conf-available/10-fastcgi.conf /etc/lighttpd/conf-enabled/10-fastcgi.conf
ln -s /etc/lighttpd/conf-available/15-php7.0-fpm.conf  /etc/lighttpd/conf-enabled/15-php7.0-fpm.conf 
service lighttpd restart

echo -e "Playing with minera dirs\n-----\n"
chown -R minera.minera `pwd`
mkdir -p $MINERA_LOGS
chmod 777 $MINERA_LOGS
chmod 777 $MINERA_CONF
chmod 777 minera-bin/cgminerStartupScript
chown -R minera.minera $MINERA_LOGS
rm -rf $MINERA_OLD_LOGS
ln -s $MINERA_LOGS $MINERA_OLD_LOGS

echo -e "Adding Minera logrotate\n-----\n"
cp `pwd`"/minera.logrotate" /etc/logrotate.d/minera
service rsyslog restart

echo -e "Adding default startup settings to redis\n-----\n"
echo -n $MINER_OPT | redis-cli -x set minerd_settings
echo -n "70e880b1effe0f770849d985231aed2784e11b38" | redis-cli -x set minera_password
echo -n "1" | redis-cli -x set guided_options
echo -n "0" | redis-cli -x set manual_options
echo -n "1" | redis-cli -x set minerd_autodetect
echo -n "1" | redis-cli -x set anonymous_stats
echo -n "cpuminer" | redis-cli -x set minerd_software
echo -n '["132","155","3"]' | redis-cli -x set dashboard_coin_rates
echo -e '[{"url":"stratum+tcp://ltc.ghash.io:3333","username":"michelem.minera","password":"x"}]'  | redis-cli -x set minerd_pools

echo -e "Adding minera startup command to rc.local\n-----\n"
chmod 777 /etc/rc.local

RC_LOCAL_CMD='su - minera -c "/usr/bin/screen -dmS cpuminer '$MINER_BIN'minerd '$MINER_OPT'"\nexit 0'

sed -i.bak "s/exit 0//g" /etc/rc.local

echo -e $RC_LOCAL_CMD >> /etc/rc.local

echo -e "Adding cron file in /etc/cron.d\n-----\n"

echo -e "*/1 * * * * www-data php `pwd`/index.php app cron" > /etc/cron.d/minera

echo -e "Configuring shellinabox\n-----\n"
sudo cp conf/shellinabox /etc/default/
sudo service shellinabox restart

echo -e "Copying cg/bfgminer udev rules\n-----\n"
sudo cp conf/01-cgminer.rules /etc/udev/rules.d/
sudo cp conf/70-bfgminer.rules /etc/udev/rules.d/
sudo service udev restart

echo -e "Installing NVM and Node requirements\n-----\n"
su - minera -c /var/www/minera/install_nvm.sh

echo -e "Installing libblkmaker\n-----\n"
LIBCOUNT=`strings -n5 /etc/ld.so.cache|grep -i libblkmaker|wc -l`
if [ $LIBCOUNT -lt 2 ];
then
	cd minera-bin/src/libblkmaker
	sudo make install
	sudo ldconfig
fi

echo -e "Generating unique SSH keys\n-----\n"
sudo rm /etc/ssh/ssh_host_*
sudo dpkg-reconfigure openssh-server
sudo service ssh restart

echo -e "Building miners, this will take loooooooot of time in a low resource system, I strongly suggest you to take a beer (better two) and relax a while. Your Minera will be ready after this.\n-----\n"
su - minera -c /var/www/minera/build_miner.sh 

echo -e 'DONE! Minera is ready!\n\nOpen the URL: http://'$(hostname -I | tr -d ' ')'/minera/\n\nAnd happy mining!\n'

I manually install minera on any PI type Or PC, i can install Ubuntu 16 on and not just RPI's, like this :.

Code:

sudo apt-get update
sudo apt-get upgrade



sudo apt-get install -y lighttpd php7.0-cgi
sudo lighty-enable-mod fastcgi-php
sudo lighty-enable-mod fastcgi
sudo service lighttpd force-reload

sudo apt-get install -y redis-server git screen php7.0-cli php7.0-curl libblkmaker-0.1-dev

cd /var/www
sudo git clone https://github.com/michelem09/minera
cd /var/www/minera

sudo ./install_minera.sh

replace the install_minera.sh file

before you do this:

Code:

sudo ./install_minera.sh

here:

Code:

cd /var/www/minera

[paintballer4lfe]

when you installed minera did you use Ubuntu 16 ?.  if so, the problem may be with the PHP in Ubuntu 16 you have use php 7.0 . i was having kind of the same issue . I made up my own install_minera.sh
 and do manual installs no issue now  but one bfg doesn't auto start but no big deal, i just  haven't got around to fixing it . here's is my install_minera.sh

with the corrected php for Ubuntu 16.4.1 installs. my install_minera.sh file installs no mining software other then maybe cpuminer, i replace BFG with my own version with the cp command.

Code:

#!/bin/bash
# This is the main install script for Minera https://github.com/michelem09/minera
# This script, as Minera, is intended to be used on a Debian-like system

echo -e "-----\nSTART Minera Install script\n-----\n"

echo -e "-----\nInstall extra packages\n-----\n"
apt-get -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" install -y build-essential libtool libcurl4-openssl-dev libjansson-dev libudev-dev libncurses5-dev autoconf automake postfix redis-server git screen php7.0-cli php7.0-curl php7.0-fpm php7.0-readline php7.0-json wicd-curses uthash-dev libmicrohttpd-dev libevent-dev libusb-1.0-0-dev libusb-dev libblkmaker-0.1-dev shellinabox supervisor lighttpd

echo -e "Adding Minera user\n-----\n"
adduser minera --gecos "" --disabled-password
echo "minera:minera" | chpasswd

echo -e "Adding groups to Minera\n-----\n"
usermod -a -G dialout,plugdev,tty,www-data minera

echo -e "Adding sudoers configuration for www-data and minera users\n-----\n"
echo -e "\n#Minera settings\nminera ALL = (ALL) NOPASSWD: ALL\nwww-data ALL = (ALL) NOPASSWD: ALL" >> /etc/sudoers

MINER_OPT="--gc3355-detect --gc3355-autotune --freq=850 -o stratum+tcp://ltc.ghash.io:3333 -u michelem.minera -p x --retries=1"
MINER_BIN=`pwd`"/minera-bin/"
MINERA_LOGS="/var/log/minera"
MINERA_CONF=`pwd`"/conf"
MINERA_OLD_LOGS=`pwd`"/application/logs"

echo -e "Adding SSL certificate\n-----\n"
mkdir /etc/lighttpd/certs
cp $MINERA_CONF/lighttpd.pem /etc/lighttpd/certs/
chmod 400 /etc/lighttpd/certs/lighttpd.pem

echo -e "Copying Lighttpd conf\n-----\n"
cp $MINERA_CONF/lighttpd.conf /etc/lighttpd/
cp $MINERA_CONF/10-fastcgi.conf /etc/lighttpd/conf-available/10-fastcgi.conf
cp $MINERA_CONF/15-php7.0-fpm.conf /etc/lighttpd/conf-available/15-php7.0-fpm.conf
ln -s /etc/lighttpd/conf-available/10-fastcgi.conf /etc/lighttpd/conf-enabled/10-fastcgi.conf
ln -s /etc/lighttpd/conf-available/15-php7.0-fpm.conf  /etc/lighttpd/conf-enabled/15-php7.0-fpm.conf 
service lighttpd restart

echo -e "Playing with minera dirs\n-----\n"
chown -R minera.minera `pwd`
mkdir -p $MINERA_LOGS
chmod 777 $MINERA_LOGS
chmod 777 $MINERA_CONF
chmod 777 minera-bin/cgminerStartupScript
chown -R minera.minera $MINERA_LOGS
rm -rf $MINERA_OLD_LOGS
ln -s $MINERA_LOGS $MINERA_OLD_LOGS

echo -e "Adding Minera logrotate\n-----\n"
cp `pwd`"/minera.logrotate" /etc/logrotate.d/minera
service rsyslog restart

echo -e "Adding default startup settings to redis\n-----\n"
echo -n $MINER_OPT | redis-cli -x set minerd_settings
echo -n "70e880b1effe0f770849d985231aed2784e11b38" | redis-cli -x set minera_password
echo -n "1" | redis-cli -x set guided_options
echo -n "0" | redis-cli -x set manual_options
echo -n "1" | redis-cli -x set minerd_autodetect
echo -n "1" | redis-cli -x set anonymous_stats
echo -n "cpuminer" | redis-cli -x set minerd_software
echo -n '["132","155","3"]' | redis-cli -x set dashboard_coin_rates
echo -e '[{"url":"stratum+tcp://ltc.ghash.io:3333","username":"michelem.minera","password":"x"}]'  | redis-cli -x set minerd_pools

echo -e "Adding minera startup command to rc.local\n-----\n"
chmod 777 /etc/rc.local

RC_LOCAL_CMD='su - minera -c "/usr/bin/screen -dmS cpuminer '$MINER_BIN'minerd '$MINER_OPT'"\nexit 0'

sed -i.bak "s/exit 0//g" /etc/rc.local

echo -e $RC_LOCAL_CMD >> /etc/rc.local

echo -e "Adding cron file in /etc/cron.d\n-----\n"

echo -e "*/1 * * * * www-data php `pwd`/index.php app cron" > /etc/cron.d/minera

echo -e "Configuring shellinabox\n-----\n"
sudo cp conf/shellinabox /etc/default/
sudo service shellinabox restart

echo -e "Copying cg/bfgminer udev rules\n-----\n"
sudo cp conf/01-cgminer.rules /etc/udev/rules.d/
sudo cp conf/70-bfgminer.rules /etc/udev/rules.d/
sudo service udev restart

echo -e "Installing NVM and Node requirements\n-----\n"
su - minera -c /var/www/minera/install_nvm.sh

echo -e "Installing libblkmaker\n-----\n"
LIBCOUNT=`strings -n5 /etc/ld.so.cache|grep -i libblkmaker|wc -l`
if [ $LIBCOUNT -lt 2 ];
then
	cd minera-bin/src/libblkmaker
	sudo make install
	sudo ldconfig
fi

echo -e "Generating unique SSH keys\n-----\n"
sudo rm /etc/ssh/ssh_host_*
sudo dpkg-reconfigure openssh-server
sudo service ssh restart

echo -e "Building miners, this will take loooooooot of time in a low resource system, I strongly suggest you to take a beer (better two) and relax a while. Your Minera will be ready after this.\n-----\n"
su - minera -c /var/www/minera/build_miner.sh 

echo -e 'DONE! Minera is ready!\n\nOpen the URL: http://'$(hostname -I | tr -d ' ')'/minera/\n\nAnd happy mining!\n'

I manually install minera on any PI type Or PC, i can install Ubuntu 16 on and not just RPI's, like this :.

Code:

sudo apt-get update
sudo apt-get upgrade



sudo apt-get install -y lighttpd php7.0-cgi
sudo lighty-enable-mod fastcgi-php
sudo lighty-enable-mod fastcgi
sudo service lighttpd force-reload

sudo apt-get install -y redis-server git screen php7.0-cli php7.0-curl libblkmaker-0.1-dev

cd /var/www
sudo git clone https://github.com/michelem09/minera
cd /var/www/minera

sudo ./install_minera.sh

replace the install_minera.sh file

before you do this:

Code:

sudo ./install_minera.sh

here:

Code:

cd /var/www/minera

It is 16.04, i tried your modified install and php7 but it just shells out refused connection and errors, i'm going to play around with it a little more but for the mean time i spun up a 14.04 server that i'll see if it changes/works on it. I don't care what version it goes on i just want it to work.

[Senja Kemuning]

I'm sorry, late to read and follow this thread, very happy can found this thread. Want to know, is this software can be used for all pools? Is last version also supports if I use Antminer S7?

[toptek]

php7.0 and do a clean install don't try to install over pnp5 that minera is using with Ubuntu 15 or lower it may not work or do what your saying . unless you uninstall minera then uninstall anything to do with php 5.
 under Ubuntu 16, it doesn't really replace it like thy say it may make things worse . for it to down load install it needs to be stated as php7.0 not php7, I  might be wrong it may have changed . and php7.0 doesn't work to well with Ubuntu 14 if you can even download it with Ubuntu 14,  i would rather use Ubuntu 16 . php 5 won't  install with Ubuntu 16 any way it may say some thing like no such package is available in Ubuntu 16,  unless you share it that's another mess to deal with , for me minera runs better under Ubuntu 16 clean installed. A few tips to help some .


thanks top.

This site is the best place  Ive found for all most any PI type that offers Ubuntu 16 images they even have tools to build your own image  but no RPI support, Ubuntu 16 has RPI images you can use off there site or from the RPI site . . or build it

http://www.armbian.com/

[michelem]

I'm sorry, late to read and follow this thread, very happy can found this thread. Want to know, is this software can be used for all pools? Is last version also supports if I use Antminer S7?

Yes with any pool, but with S7 you have to enable it for API access and you must have Cgminer installed. But you should give a try to the new Minera (beta) at https://app.getminera.com

[michelem]

It is 16.04, i tried your modified install and php7 but it just shells out refused connection and errors, i'm going to play around with it a little more but for the mean time i spun up a 14.04 server that i'll see if it changes/works on it. I don't care what version it goes on i just want it to work.

Can I see some of that errors with php7.0?

[zOU]

Yes with any pool, but with S7 you have to enable it for API access and you must have Cgminer installed. But you should give a try to the new Minera (beta) at https://app.getminera.com

I still have to figure out how to do it   on a S7....

[michelem]

Yes with any pool, but with S7 you have to enable it for API access and you must have Cgminer installed. But you should give a try to the new Minera (beta) at https://app.getminera.com

I still have to figure out how to do it   on a S7....

May be S7 hasn't Cgminer (like S9)? Or what's the problem with it?

[zOU]

editing cgminer.conf has no effet, it is overwritten by the system...
and even though it is supposed to accept API commands, it doesn't

but I don't really need it

[BroMarduk]

I noticed on my RPi with multiple IPs, the URLs that Minera generates after running the installation script and at boot puts all the IPs into the same address like:

Connect to http://192.168.1.1192.168.1.2192.168.1.3/minera to manage Minera

I can fix it by replacing the existing block in rc.local to something like this:

Code:

# Print the IP address that Minera works on
_IP=$(echo $(hostname -I)\ | tr " " "\n") || true
printf "Starting Minera Bitcoin Mining Monitor...\n"
if [ -z "$_IP" ]; then
  printf "Unable to find Minera management address"
else
  printf "Connect to manage Minera at\n"
  for item in $_IP
    do
      printf "  http://%s/minera\n" "$item"
    done
fi
printf "         Happy mining!\n"

Which will print each address separately.   This, as usual, gets overwritten whenever making a change to Minera that overwrites the rc.local file (not that I change it that often, but YMMV).

Just passing the snippet along in case any of the developers find it useful and want to use it in a future release. 

I also noticed on my RPI3, that on startup, I get all sorts of redis-cli errors.   This seemed to be due to the fact that redis-server had not fully started up.   I added a sleep 5 statement in the rc.local right before the first redis-cli call and that fixed the errors.   Be nice to have a setting in Minera to optionally add that sleep in if needed.

Best,

Dan

[GatekeeperZA]

Hey guys I wanted to find out im testing the latest Stratum Proxy but
I cannot get CPUMiner connect CG and BFG miner connects fine but am having issues with only cpuminer.
has anyone sucessfully got cpuminer in minera to connect to the proxy.. if so please post suggestions...
my whole reason is to test XnSub is this even compatible .. as i have seen reports of it working but am
personally not able to get it going.. please help. thanks guys..

[michelem]

Hey guys I wanted to find out im testing the latest Stratum Proxy but
I cannot get CPUMiner connect CG and BFG miner connects fine but am having issues with only cpuminer.
has anyone sucessfully got cpuminer in minera to connect to the proxy.. if so please post suggestions...
my whole reason is to test XnSub is this even compatible .. as i have seen reports of it working but am
personally not able to get it going.. please help. thanks guys..

CPUMiner fork in Minera is a special fork done in 2014 (and never updated) to work with Gridseed (https://github.com/siklon/cpuminer-gc3355), it was make by a guy I didn't see anymore and I'm pretty sure it hasn't extranonce (XnSub) support.
So you can quit your tries because it will never work with that.

[michelem]

I noticed on my RPi with multiple IPs, the URLs that Minera generates after running the installation script and at boot puts all the IPs into the same address like:

Connect to http://192.168.1.1192.168.1.2192.168.1.3/minera to manage Minera

I can fix it by replacing the existing block in rc.local to something like this:

Which will print each address separately.   This, as usual, gets overwritten whenever making a change to Minera that overwrites the rc.local file (not that I change it that often, but YMMV).

Just passing the snippet along in case any of the developers find it useful and want to use it in a future release. 

I also noticed on my RPI3, that on startup, I get all sorts of redis-cli errors.   This seemed to be due to the fact that redis-server had not fully started up.   I added a sleep 5 statement in the rc.local right before the first redis-cli call and that fixed the errors.   Be nice to have a setting in Minera to optionally add that sleep in if needed.

Best,

Dan

Thanks man, I noticed that too, may be one day I will fix all these problems with the old Minera but I'd like to concentrate to the new Minera now.

[BroMarduk]

Thanks man, I noticed that too, may be one day I will fix all these problems with the old Minera but I'd like to concentrate to the new Minera now.

No worries. But that does make be wonder, will the new Minera support stick miners or just network miners?

[zOU]

network miners directly, and stick miners by communicating with the cgminer instance.

I have it monitoring 4 S3+, 4 S5, 1 S7, and a bunch of USB miners connected on a laptop.

[BroMarduk]

network miners directly, and stick miners by communicating with the cgminer instance.

I have it monitoring 4 S3+, 4 S5, 1 S7, and a bunch of USB miners connected on a laptop.

Great.   I'm currently running BFGminer with Minera 0.7.0, but could easily switch if necessary, so thanks for letting me know.

[michelem]

Hello Mineras,
I've updated the beta version of the new Minera, now you can clone the pools but also you can skip to add the pools when you add a miner and let Minera gets them from the online miner.
Then you can also easily select multiple miners for a pool, just click the relative button in the pool repository to get a list of all the miners to be selected/deselected.
Finally I fixed and add sorting to almost every tables (there are still some little bugs but much better than before) and fixed some bugs around.

If you wanna give a try please go to https://app.getminera.com/