[ANN][SUPERCOIN]First P2p Decentralized Trustless Anonymous Wallet Coming Soon

[mxxxxxx]

Yes if people don`t dump coins to fast , we will see how much btc will multipool create with this power

I've been adding to my position in Supercoin the last few hours and brought a few people in, they bought thousands of supercoin.

So the "Payout" for the Supercoin mining is going to be in 24-48h? Meaning that the trading volume are probably going to rise in a day or two?

We are holding the Coins, no selling or dumping on our side. My brother bought on mintpal, I bought some on cryptsy, 5000 for a friend too.

Maybe more to come.

We would like more confidence and trading activity in the market before putting more money.

Yes i am holding and mining now good times to come

[supercointeam]

nice work lads !!  

question about multipool: i see you can pick difficuly depending on your miners.. if i have 3 workers (each has 8mhash of x11) do i put them on one supercoin adress and difficulty 8192 ... or i separate them and put difficulty 4096? or 2048?

i see this option first time... thanks in advance

It's better you use much lower difficulty such as 256 or 512. So you get maximum performance for the shares send. 8192 for those over 100 mhs.

[eXe47]

nice work lads !!  

question about multipool: i see you can pick difficuly depending on your miners.. if i have 3 workers (each has 8mhash of x11) do i put them on one supercoin adress and difficulty 8192 ... or i separate them and put difficulty 4096? or 2048?

i see this option first time... thanks in advance

It's better you use much lower difficulty such as 256 or 512. So you get maximum performance for the shares send. 8192 for those over 100 mhs.

maybe you can add it to the difficulty table or post a notice, the difficulty table could be misleading some people.

[supercointeam]

I've been adding to my position in Supercoin the last few hours and brought a few people in, they bought thousands of supercoin.

So the "Payout" for the Supercoin mining is going to be in 24-48h? Meaning that the trading volume are probably going to rise in a day or two?

Yes, we will buy SUPER from these markets bittrex, mintpal, cryptsy daily.
Initial payments will be done manually, later times will be full automatic. We say 24 hours to 48 hours in case.

[novirudarzg]

thanks guys

[supercointeam]

nice work lads !!  

question about multipool: i see you can pick difficuly depending on your miners.. if i have 3 workers (each has 8mhash of x11) do i put them on one supercoin adress and difficulty 8192 ... or i separate them and put difficulty 4096? or 2048?

i see this option first time... thanks in advance

It's better you use much lower difficulty such as 256 or 512. So you get maximum performance for the shares send. 8192 for those over 100 mhs.

maybe you can add it to the difficulty table or post a notice, the difficulty table could be misleading some people.

We can consider this for the future, but go for standard settings 256 or 512 unless you have over 50mhs hashpower.

[supercointeam]

X13 is most mined altcoin in the supermultipool



http://supermultipool.com/

[brookefinancial]

Are the numbers looking good? Do we know if there is a lot of people mining?

[supercointeam]

Are the numbers looking good? Do we know if there is a lot of people mining?

it's good start for a pool opened less than 24 hours.

You can see live miners... http://supermultipool.com/miners
26 Miners / 17 Alive it looks its about 250 mhs...

Lets say 1 ghz creates 1 btc buy volume.

Imagine this buy power visit exchanges and buy SUPER everyday...

On bittrex only currently from 2200 to 2600 satoshi 0.75 BTC buy needed.

We should better reach 5 ghz or more in average.

[nomad13666]

As promised, here is the this week's weekly update from dev team on the phase-2 project (trustless system):

The dev team started the implementation of the p2p decentralized trustless system, with our proprietary algorithm. As previously noted, the algorithm is pretty complex to ensure all parties behave correctly. If one party is not behaving reasonably, then he will lose his share in a commonly held "escrow" that initially put together (when he agrees to participate the transaction). Why the middle nodes are willing to participate a transaction? because by providing anonymous services to others, he will get commissions. As we said this is a complex process, it in fact includes 20-25 steps in a transaction and it forms a complex tree like structure with various error-conditions (such as one participating party disconnected, or a node trying to cheat) and how the system will handle them.

We are making good progress on our system set up and implementation, but to complete the system, it still requires weeks more of hard work. We are working on it on daily basis, and we will provide updates each week. Please post any questions you may have, and we will try our best to answer them.

Thanks for the update! Keep up the good work!

[jdebunt]

Small update article about the multipool :

http://www.cryptoarticles.com/crypto-news/supercoins-supermultipool-open-for-business


Please share

[supercointeam]

Small update article about the multipool :

http://www.cryptoarticles.com/crypto-news/supercoins-supermultipool-open-for-business


Please share

Nice article, thanks. Let's let everyone know. SuperMultipool.com is really SUPER.

[supercointeam]

Now, our hashpower is about 300 MHs. Thanks everyone. Keep mining. Let's reach 1 GHZ in our first day. Would not be so cool ha?

http://supermultipool.com/

[copychicken]

reminder... use the moded sgminers and not the normal ones for 3mhs per gpu...

[brookefinancial]

Great article, it helps to sell it. I dont see a lot of tweet on Supercoin except from the dev, you guys should promote it more hehe

[supercointeam]

reminder... use the moded sgminers and not the normal ones for 3mhs per gpu...

Can you provide those links? So i can ask pool dev to put these links in the site.

[Prototyp]

I cant connect, but i see no mistake. This config works an all other pools without a problem.

{
"pools" : [
        
        {
       "url" : "stratum+tcp://euwest.supermultipool.com:4444",
       "user": "SjCB4NqaxJc9kYSmPsXKhgznPqSzDq1SWU",
       "pass": "xxxxxx"
        },
        {
       "url" : "stratum+tcp://useast.supermultipool.com:4444",
       "user": "SjCB4NqaxJc9kYSmPsXKhgznPqSzDq1SWU",
       "pass": "xxxxxx"
        }

],
"intensity" : "13,13,13,13,13,13",
"kernel" : "x13mod",
"lookup-gap" : "2,2,2,2,2,2",
"thread-concurrency" : "8192,8192,8192,8192,8192,8192",

"gpu-engine" : "1100,1100,1100,1100,1100,1100",
"gpu-fan" : "30-95,30-95,30-95,30-95,30-95,30-95",
"gpu-memclock" : "1600,1600,1600,1600,1600,1600",
"gpu-powertune" : "-20,-20,-20,-20,-20,-20",

"temp-cutoff" : "95,95,95,95,95,95",
"temp-overheat" : "85,85,85,85,85,85",
"temp-target" : "75,75,75,75,75,75",

"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",

"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",

"failover-switch-delay" : "60",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}

[SxC]

I cant connect, but i see no mistake. This config works an all other pools without a problem.

{
"pools" : [
        
        {
       "url" : "stratum+tcp://euwest.supermultipool.com:4444",
       "user": "SjCB4NqaxJc9kYSmPsXKhgznPqSzDq1SWU",
       "pass": "xxxxxx"
        },
        {
       "url" : "stratum+tcp://useast.supermultipool.com:4444",
       "user": "SjCB4NqaxJc9kYSmPsXKhgznPqSzDq1SWU",
       "pass": "xxxxxx"
        }

],
"intensity" : "13,13,13,13,13,13",
"kernel" : "x13mod",
"lookup-gap" : "2,2,2,2,2,2",
"thread-concurrency" : "8192,8192,8192,8192,8192,8192",

"gpu-engine" : "1100,1100,1100,1100,1100,1100",
"gpu-fan" : "30-95,30-95,30-95,30-95,30-95,30-95",
"gpu-memclock" : "1600,1600,1600,1600,1600,1600",
"gpu-powertune" : "-20,-20,-20,-20,-20,-20",

"temp-cutoff" : "95,95,95,95,95,95",
"temp-overheat" : "85,85,85,85,85,85",
"temp-target" : "75,75,75,75,75,75",

"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",

"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",

"failover-switch-delay" : "60",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}

i notice your trying to mine x 13 have you got the correct miner ?

[Prototyp]

i notice your trying to mine x 13 have you got the correct miner ?

Yes, have it tested with X11 (SPH),with x13mod and the correct ports. BAMT config and miner works correct but i cant mine on supermultipool.

[supercointeam]

I cant connect, but i see no mistake. This config works an all other pools without a problem.

{
"pools" : [
       
        {
       "url" : "stratum+tcp://euwest.supermultipool.com:4444",
       "user": "SjCB4NqaxJc9kYSmPsXKhgznPqSzDq1SWU",
       "pass": "xxxxxx"
        },
        {
       "url" : "stratum+tcp://useast.supermultipool.com:4444",
       "user": "SjCB4NqaxJc9kYSmPsXKhgznPqSzDq1SWU",
       "pass": "xxxxxx"
        }

],
"intensity" : "13,13,13,13,13,13",
"kernel" : "x13mod",
"lookup-gap" : "2,2,2,2,2,2",
"thread-concurrency" : "8192,8192,8192,8192,8192,8192",

"gpu-engine" : "1100,1100,1100,1100,1100,1100",
"gpu-fan" : "30-95,30-95,30-95,30-95,30-95,30-95",
"gpu-memclock" : "1600,1600,1600,1600,1600,1600",
"gpu-powertune" : "-20,-20,-20,-20,-20,-20",

"temp-cutoff" : "95,95,95,95,95,95",
"temp-overheat" : "85,85,85,85,85,85",
"temp-target" : "75,75,75,75,75,75",

"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",

"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",

"failover-switch-delay" : "60",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}

hmm can you simply try to download the miner software and use the bat file given from the multipool? Or better try X11 mining?
The basic difference is you should put --failover between each pool and command line should have similar attributes.

i use in my command line -I 18 -g 2 -w 128 after the config.