goodluck0319
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 01:40:13 PM |
|
what does really mean ?
|
|
|
|
lasybear (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 113
Merit: 14
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 01:50:54 PM |
|
EDIT: went back to girino's... I found that I get way more WU with his. Sorry guys, but willing to try anything and support! But what can I say... with girino, pool report 15mh/s, with this one around 10mh/s - either I'm doing something wrong, or I dont know...
Frequent hops between pools (==girino miner) -> less Diff Less Diff -> more WU (and vise versa) Long stay on one pool (==current version) -> more Diff More Diff -> less WU. He said he blocked the pool so there isn't a way for it to connect. I am digging through girino's miner but at this point it's just a needle in a haystack search. I see Diff and WU on his screenshots ) And high intensity for r9 280x (i use 16). And HW errors (he said) is a effect of engine overboost (1100MHz for used undervoltaged card is too high with multiple kernels), high intensity and high tc... Hint for everybody: results are better and stability much higher when a hashrate is divided equally between all threads on GPU, like this: Thread 6: 1.2 Mh/s Enabled ALIVE Thread 7: 1.2 Mh/s Enabled ALIVE
|
|
|
|
Omikifuse
Legendary
Offline
Activity: 1820
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 01:51:04 PM |
|
Anybody have low hash rate reported from pool website? My total rig is 12.56 mh/s but my pool only reported 10.25 mh/s
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 01:52:45 PM |
|
Anybody have low hash rate reported from pool website? My total rig is 12.56 mh/s but my pool only reported 10.25 mh/s
It's called variance.
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
th00ber
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 01:55:02 PM |
|
Wow ... 7950 Dual-X @1050/1250
before = 1.78 Mh/s after = 2.55 Mh/s
I'll check the power draw when I'm home
|
|
|
|
mfqrs3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 01:59:22 PM |
|
I too had too much problems with this version of miner, gpu's freezing, restarting, locking and so on. I had to use higher voltages than for scrypt to make it work stable but power draw is almost the same as original darkcoin kernel.
|
|
|
|
Omikifuse
Legendary
Offline
Activity: 1820
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 02:00:38 PM |
|
I too had too much problems with this version of miner, gpu's freezing, restarting, locking and so on. I had to use higher voltages than for scrypt to make it work stable but power draw is almost the same as original darkcoin kernel.
Which version of miner you are using, there is actually 3-4 version of this sph-sgminer. Use the latest one which fixed some bugs I think..
|
|
|
|
gemmacoin
Newbie
Offline
Activity: 27
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 02:09:33 PM |
|
Is there Asus r9 280x dc2 owner who use this miner ?
Could you share your config?
4x Asus r9 280x dc2 for a total hashrate of 12.66Mh/s Power consumtion of 560W at wall (kill-a-wat measured). All GPUs undervolted using MSI Afterburner (two at 1,056V and two at 1,075V). All cards at 1.070 Core clock and 1.500 memory clock Temps between 44º and 47ºC (room temp 21ºC) with fixed 50% fan speed My settings are: "api-allow" : "W:127.0.0.1", "api-listen" : true, "expiry" : "1", "failover-only" : true, "queue" : "1", "scan-time" : "1", "intensity" : "18", "vector" : "1", "worksize" : "256", "kernel" : "x11mod", "thread-concurrency" : "8192", "lookup-gap" : "2", "failover-switch-delay" : "10", "gpu-threads" : "2"
|
|
|
|
mfqrs3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 02:14:12 PM |
|
I too had too much problems with this version of miner, gpu's freezing, restarting, locking and so on. I had to use higher voltages than for scrypt to make it work stable but power draw is almost the same as original darkcoin kernel.
Which version of miner you are using, there is actually 3-4 version of this sph-sgminer. Use the latest one which fixed some bugs I think.. I used the B2 version... didn't saw never version ?
|
|
|
|
Starscream
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 02:26:54 PM |
|
So, got 2 rigs each with 3x r9 290 and the 3rd card in each one always reports lower hashrate with this miner (tried using all the versions posted here) Here's how it shows:
GPU 0: 71.0C 72% | 3.662M/3.638Mh/s | R: 3.0% HW:0 WU:0.054/m I:19 GPU 1: 65.0C 66% | 3.613M/3.628Mh/s | R: 1.8% HW:0 WU:0.052/m I:19 GPU 2: 66.0C 67% | 3.222M/3.284Mh/s | R: 2.9% HW:0 WU:0.044/m I:19
It's identical in both rigs (first 2 GPUs are 3.6mh/s while 3rd one is 3.2mh/s). Tried swapping cards location, playing with configs, numerous restarts, but nothing helped.
When mining Scrypt, n-Factor or x-11 using girino's they're all stable (getting 3.6mh/s with girino's as well)
Any ideas why that is happening?
|
|
|
|
romulus_ut3
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 02:28:57 PM Last edit: May 27, 2014, 02:59:26 PM by romulus_ut3 |
|
The miner seems to be reporting higher hash rates, however, from the pool's side, I see no improvements.
Edit: Oddly enough, now it's reporting higher than what I used to get with the older miner over time from the pool's side,
What I noticed is that the video memory usage of the cards have skyrocketed, the miner is now using eight to ten times more video memory than it used to.
Those of you who are facing inconsistent hash rates, try lowering the number of threads. The inconsistent hash rate occurs when the card starts hitting it's video memory limit. Be sure to leave 200 Mb of free memory at least (you can view the vram usage using Gpu-Z)
And for those of you who are still using Intensity, I think it's about time you people learn to use the Experimental intensity, and use more than two threads. It provides much better results while putting less stress on your hardware.
My settings for my Sapphire HD 7950 3GB Dual-X OC:
sgminer.exe -k x11mod -o stratum+tcp://your.pool.address:port -u username -p password --thread-concurrency 16384 --no-submit-stale -g 5 -X 6 --gpu-powertune 15 --lookup-gap 0 --gpu-engine 1100--queue 0 --scan-time 1 --expiry 30
This gets me 2.442 Mh/s (previously I used to get only 2 Mh/s with the old miner, and my clocks are pretty conservative. If you can push the core and memory more, you will yield better results)
And the settings I have for my Sapphire HD 7850 Dual-X OC 2GB:
sgminer.exe -k x11mod -o stratum+tcp://your.pool.address:port -u username -p password --thread-concurrency 4096 --lookup-gap 0 --no-submit-stale -g 2 -X 6 --gpu-engine 1100 --queue 0 --scan-time 7 --expiry 28
This gets me about 1.4 Mh/s, previously I used to get about 1.120 Mh/s at best.
I hope this helps.
|
|
|
|
Omikifuse
Legendary
Offline
Activity: 1820
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 02:43:23 PM |
|
The miner seems to be reporting higher hash rates, however, from the pool's side, I see no improvements.
What I noticed is that the video memory usage of the cards has skyrocketed, the miner is now using four times more video memory than it used to.
Those of you who are facing inconsistent hash rates, try lowering the number of threads. The hash rate jump only occurs when the card starts hitting the video memory limit.
I hope this helps.
If I didn't lower the number of threads, will I still get the hashrate as reported in long run?
|
|
|
|
romulus_ut3
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 02:52:29 PM |
|
The miner seems to be reporting higher hash rates, however, from the pool's side, I see no improvements.
What I noticed is that the video memory usage of the cards has skyrocketed, the miner is now using four times more video memory than it used to.
Those of you who are facing inconsistent hash rates, try lowering the number of threads. The hash rate jump only occurs when the card starts hitting the video memory limit.
I hope this helps.
If I didn't lower the number of threads, will I still get the hashrate as reported in long run? I have updated my post. And here's the thing. With the old miner, both my cards used to use up about 260 Megabytes of video memory on average, but now the video memory usage on my HD 7950 is 2.7 GB. The more threads you will add, the more video memory it will require, and if the number of threads are too high (I used to run 8 threads on my HD 7950, now I am running 5) the miner will not work at all. If you are facing inconsistant hash rates, simply start lowering the thread count till you reach to a point where the hash rate isn't jumpy anymore. And yes, the pool dashboard isn't real time, so there will be a variance.
|
|
|
|
JPS2K5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 03:04:14 PM |
|
Wow ... 7950 Dual-X @1050/1250
before = 1.78 Mh/s after = 2.55 Mh/s
I'll check the power draw when I'm home
I am currently on ~2.8 Mh/s @ 1050/1400, I=18 (19 or 20 gives me nothing extra), w=256 230watts total system power (i5), 59 degrees. I was about to sell my card for a 750ti but mehhh.... ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
Eastwind
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 03:33:27 PM |
|
The miner seems to be reporting higher hash rates, however, from the pool's side, I see no improvements.
Edit: Oddly enough, now it's reporting higher than what I used to get with the older miner over time from the pool's side,
What I noticed is that the video memory usage of the cards have skyrocketed, the miner is now using eight to ten times more video memory than it used to.
Those of you who are facing inconsistent hash rates, try lowering the number of threads. The inconsistent hash rate occurs when the card starts hitting it's video memory limit. Be sure to leave 200 Mb of free memory at least (you can view the vram usage using Gpu-Z)
And for those of you who are still using Intensity, I think it's about time you people learn to use the Experimental intensity, and use more than two threads. It provides much better results while putting less stress on your hardware.
My settings for my Sapphire HD 7950 3GB Dual-X OC:
sgminer.exe -k x11mod -o stratum+tcp://your.pool.address:port -u username -p password --thread-concurrency 16384 --no-submit-stale -g 5 -X 6 --gpu-powertune 15 --lookup-gap 0 --gpu-engine 1100--queue 0 --scan-time 1 --expiry 30
This gets me 2.442 Mh/s (previously I used to get only 2 Mh/s with the old miner, and my clocks are pretty conservative. If you can push the core and memory more, you will yield better results)
And the settings I have for my Sapphire HD 7850 Dual-X OC 2GB:
sgminer.exe -k x11mod -o stratum+tcp://your.pool.address:port -u username -p password --thread-concurrency 4096 --lookup-gap 0 --no-submit-stale -g 2 -X 6 --gpu-engine 1100 --queue 0 --scan-time 7 --expiry 28
This gets me about 1.4 Mh/s, previously I used to get about 1.120 Mh/s at best.
I hope this helps.
I use -g 2, thread-concurrency 8192, -i 17 and can get 2.45MH, with core/memory 950/1250MHz. You should get more with your 1100MHz core. My 7950 is modded with faster memory timing. There is a thread about that in litecointalk
|
|
|
|
GrandZ
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 03:47:01 PM |
|
My RIG 2*280x Sapphire + 2*270x ASUS[SPOILER] { "pools" : [ { "name" : "TMB-1", "url" : "stratum+tcp://am01.eu.trademybit.com:4440", "user" : "GrandZ.13", "pass" : "159159", "pool-priority" : "0" }, { "name" : "TMB-01", "url" : "stratum+tcp://am02.eu.trademybit.com:4440", "user" : "GrandZ.13", "pass" : "159159", "pool-priority" : "1" } ], "api-allow" : "W:127.0.0.1,W:192.168.0.0/24", "api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "vector" : "1", "failover-only" : true, "kernel-path" : "/usr/local/bin", "log" : "5", "queue" : "1", "scan-time" : "7", "shares" : "0", "gpu-threads" : "2,2,2,2", "gpu-dyninterval" : "7", "gpu-engine" : "1170,1200,1150,1150", "gpu-platform" : "0", "gpu-memclock" : "1500", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "20,20,20,20", "intensity" : "22,22,18,18", "kernel" : "x11mod,x11mod,x11mod,x11mod", "temp-hysteresis" : "3", "worksize" : "128,128,256,256", "lookup-gap" : "2,2,2,2", "shaders" : "2048,2048,1280,1280", "thread-concurrency" : "8192,8192,8192,8192", "failover-switch-delay" : "10", "no-pool-disable" : true, "tcp-keepalive" : "30" } [/SPOILER] http://s29.postimg.org/4n7prgeyb/X11_mod.jpgSANKS for this mod!!!
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 03:57:28 PM |
|
Wow ... 7950 Dual-X @1050/1250
before = 1.78 Mh/s after = 2.55 Mh/s
I'll check the power draw when I'm home
I am currently on ~2.8 Mh/s @ 1050/1400, I=18 (19 or 20 gives me nothing extra), w=256 230watts total system power (i5), 59 degrees. I was about to sell my card for a 750ti but mehhh.... ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) 750ti are still better and they are receiving an additional boost(2.8MH/s) in 1 week or so
|
|
|
|
JPS2K5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 04:04:25 PM |
|
Wow ... 7950 Dual-X @1050/1250
before = 1.78 Mh/s after = 2.55 Mh/s
I'll check the power draw when I'm home
I am currently on ~2.8 Mh/s @ 1050/1400, I=18 (19 or 20 gives me nothing extra), w=256 230watts total system power (i5), 59 degrees. I was about to sell my card for a 750ti but mehhh.... ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) 750ti are still better and they are receiving an additional boost(2.8MH/s) in 1 week or so I know.. but I won't get more for my 7950 than what I'd have to pay for a 750Ti. And 230 watts is like a tad bit more than running idle ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
DriverDan
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 04:08:24 PM |
|
I know.. but I won't get more for my 7950 than what I'd have to pay for a 750Ti. And 230 watts is like a tad bit more than running idle ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) If you're using 230W at idle something is wrong. All of my rigs use 40-50W at idle with no vid cards, 100-120W with 3-5 cards.
|
|
|
|
Blago
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 04:13:39 PM |
|
I know.. but I won't get more for my 7950 than what I'd have to pay for a 750Ti. And 230 watts is like a tad bit more than running idle ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) If you're using 230W at idle something is wrong. All of my rigs use 40-50W at idle with no vid cards, 100-120W with 3-5 cards. My rig at idle using 255W (AMD6300 + 280x+7870+7850+5670 + 6 funs)
|
Relax, I’m russian!... BURST-B2LU-SGCZ-NYVS-HZEPK
|
|
|
|