bullus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 06:10:11 AM |
|
If anybody help me to resolve issue with 5xxx/6xxx cards? Please start miner with sgminer -c <your conf file> -D -T > output.log after 10-15 sec press Ctrl+C and send me created file output.log to PM.
send u a pm with the logtext HD6970 x13mod and getting alot of HW-errors en no accepted shares catalyst 14.4 win8.1 7950 working fine with x13mod x11modb2 7950 -2880Kh/s x13mod 7950 - 2230kh/s
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
wevus
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 70
Merit: 10
Long Term Investor with Short Term Memory Loss
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 06:28:20 AM |
|
I can got only 2.06mh/s with these settings on my 270x...What's your platform? d0 - 280x @3.493 Mh/s d1 - 7870 @2.200 Mh/s d2 - 7850 @1.625 Mh/s d3 - 5670 @0.406 Mh/s
"gpu-platform" : "0", "device" : "0,1,2,3", "kernel" : "x11mod,x11mod,x11mod,darkcoin", "vector" : "1", "intensity" : "22,20,20,15", "worksize" : "128,128,128,256", "lookup-gap" : "2,2,2,2", "gpu-threads" : "2,2,1,1", "shaders" : "2048,1280,1024,400", "thread-concurrency" : "8192,8192,5120,1920",
"gpu-engine" : "1070-1170,1100-1200,860-1200,980", "gpu-memclock" : "1500,1200,1200,950", Posted from Bitcointa.lk - #AVhUgnqRX52ZBlTgIm getting 2.35 on my Gigabyte 7870 GHZ "intensity" : "15", "xintensity" : "0", "rawintensity" : "0", "worksize" : "64", "kernel" : "x11mod", "lookup-gap" : "2", "thread-concurrency" : "10240", "shaders" : "1280", "gpu-threads" : "4", "gpu-engine" : "1139-1139", "gpu-fan" : "30-55", "gpu-memclock" : "1500", "gpu-memdiff" : "100", "gpu-powertune" : "20", "gpu-vddc" : "1.218", "temp-cutoff" : "75", "temp-overheat" : "75", "temp-target" : "58", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "0", "scan-time" : "1", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" }
|
XChat: XQ6YhjRgXHuZKPwDTps6J6i8mwdYnXYdtY Donatations for the starving pigmies: XC XSoc3Eb7u2EwMaqV6jYChHrhdDvtZp6Cap BTC 1ALk4YtmNTLwAvPZszQvrNwmrUBSUPXNKr
|
|
|
marklin
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 10
Bitcore (BTX) anything is possible!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 06:34:37 AM |
|
|
Bitcore (BTX) anything is possible!
|
|
|
SavageWS6
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 06:47:51 AM |
|
What is your current configuration right now? can't help without knowing your config Hello again, I posted my X11 config a couple pages back.Been working on a X13 config while mining BOOST atm. Wanted to try something new. I was running kinda crappy earlier at 0.104/m and now I set the intensity down to 18, I just upped it to 0.114/m 2.6 MH/s 280X @ 1150/1500 1.150 1.62 MH/s per 270 @ 1110/1500 stock voltage { "pools" : [ { "url" : "x", "user" : "x", "pass" : "x" } ] , "device" : "0,1,2,3", "intensity" : "18,17,17,17", "lookup-gap" : "2", "thread-concurrency" : "8192,6401,6401,6401", "gpu-threads" : "2", "worksize" : "256,128,128,128", "expiry" : "1", "queue" : "0", "gpu-powertune" : "20,20,20,20", "gpu-engine" : "1150,1110,1110,1110", "gpu-memclock" : "1500,1500,1500,1500", "gpu-fan" : "80,65,65,65", "kernel" : "x13mod", "scan-time" : "1" }
|
BTC: 1NLNtXmdLVhS25xMk2neh2viHPDHEfdrGZ MYR: MQvEmxAhAhdN5rfmJsChJ3mN8CUEs9iCn6
|
|
|
ingvarfervent
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 06:52:47 AM |
|
Yes. my 6930 give 100% HW. Settings ?... try many and "clear" sgminer --kernel x13mod -o stratum... but always HW. Driver 14.4.
|
|
|
|
SavageWS6
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 06:55:37 AM |
|
Yes. my 6930 give 100% HW. Settings ?... try many and "clear" sgminer --kernel x13mod -o stratum... but always HW. Driver 14.4. 14.4 drivers have been a headache for everyone. Forget and forgive the 14.4 and remove them, and install 13.12 drivers. It will solve a lot of headaches. I haven't had 1 issue on 13.12 drivers ranging all different algorithms.
|
BTC: 1NLNtXmdLVhS25xMk2neh2viHPDHEfdrGZ MYR: MQvEmxAhAhdN5rfmJsChJ3mN8CUEs9iCn6
|
|
|
marklin
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 10
Bitcore (BTX) anything is possible!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 06:56:06 AM |
|
What is your current configuration right now? can't help without knowing your config "intensity" : "18,18,18,18", "xintensity" : "0,0,0,0", "rawintensity" : "0,0,0,0", "worksize" : "128,128,128,128", "kernel" : "x13mod,x13mod,x13mod,x13mod", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "0,0,0,0", "shaders" : "0,0,0,0", "gpu-threads" : "4,4,4,4", "gpu-engine" : "0-0,0-0,0-0,0-0", "gpu-fan" : "0-85,0-85,0-85,0-85", "gpu-memclock" : "0,0,0,0", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "85,85,85,85", "temp-target" : "75,75,75,75", "api-mcast-port" : "4028", windows 7 64 amd 14.6
|
Bitcore (BTX) anything is possible!
|
|
|
SavageWS6
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 07:11:14 AM |
|
What is your current configuration right now? can't help without knowing your config "intensity" : "18,18,18,18", "xintensity" : "0,0,0,0", "rawintensity" : "0,0,0,0", "worksize" : "128,128,128,128", "kernel" : "x13mod,x13mod,x13mod,x13mod", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "0,0,0,0", "shaders" : "0,0,0,0", "gpu-threads" : "4,4,4,4", "gpu-engine" : "0-0,0-0,0-0,0-0", "gpu-fan" : "0-85,0-85,0-85,0-85", "gpu-memclock" : "0,0,0,0", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "85,85,85,85", "temp-target" : "75,75,75,75", "api-mcast-port" : "4028", windows 7 64 amd 14.6 Damn your config is a hot mess. What did you get this at? Like I don't even know where to start. You can't use intensity,xintensity, and rawintensity.. It doesn't work like that, Just choose one. I don't know what a good number is for your cards Your look up gap needs to be set to 2. set your gpu-threads to 2 Your setting your GPU engine to 0 Mhz.. Well not actually but its messed up. Either remove that flag or set the clocks via Sapphire TRIXX or MSI Afterburner. Same thing for gpu-memclock and gpu-vddc. Set your temps a lot lower. temp-target is fine at 75, temp over-heat I'd say 80, and cut off at 85... but on this kernel it doesn't even get that hot. You also need to set your fan speed via software or in your configuration. Look at my post- https://bitcointalk.org/index.php?topic=623409.msg7008775#msg7008775That config isn't for your card but it will give you a idea what it should look like. Also downgrade your drivers to 13.12, you'll thank me later
|
BTC: 1NLNtXmdLVhS25xMk2neh2viHPDHEfdrGZ MYR: MQvEmxAhAhdN5rfmJsChJ3mN8CUEs9iCn6
|
|
|
marklin
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 10
Bitcore (BTX) anything is possible!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 07:18:01 AM |
|
What is your current configuration right now? can't help without knowing your config "intensity" : "18,18,18,18", "xintensity" : "0,0,0,0", "rawintensity" : "0,0,0,0", "worksize" : "128,128,128,128", "kernel" : "x13mod,x13mod,x13mod,x13mod", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "0,0,0,0", "shaders" : "0,0,0,0", "gpu-threads" : "4,4,4,4", "gpu-engine" : "0-0,0-0,0-0,0-0", "gpu-fan" : "0-85,0-85,0-85,0-85", "gpu-memclock" : "0,0,0,0", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "85,85,85,85", "temp-target" : "75,75,75,75", "api-mcast-port" : "4028", windows 7 64 amd 14.6 Damn your config is a hot mess. What did you get this at? Like I don't even know where to start. You can't use intensity,xintensity, and rawintensity.. It doesn't work like that, Just choose one. I don't know what a good number is for your cards Your look up gap needs to be set to 2. set your gpu-threads to 2 Your setting your GPU engine to 0 Mhz.. Well not actually but its messed up. Either remove that flag or set the clocks via Sapphire TRIXX or MSI Afterburner. Same thing for gpu-memclock and gpu-vddc. Set your temps a lot lower. temp-target is fine at 75, temp over-heat I'd say 80, and cut off at 85... but on this kernel it doesn't even get that hot. You also need to set your fan speed via software or in your configuration. Look at my post- https://bitcointalk.org/index.php?topic=623409.msg7008775#msg7008775That config isn't for your card but it will give you a idea what it should look like. Also downgrade your drivers to 13.12, you'll thank me later Heat and frequency are no problem! I use marucoin this parameter can be run and there is no hw With 13.12 driver is ok?
|
Bitcore (BTX) anything is possible!
|
|
|
SavageWS6
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 07:21:00 AM |
|
What is your current configuration right now? can't help without knowing your config "intensity" : "18,18,18,18", "xintensity" : "0,0,0,0", "rawintensity" : "0,0,0,0", "worksize" : "128,128,128,128", "kernel" : "x13mod,x13mod,x13mod,x13mod", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "0,0,0,0", "shaders" : "0,0,0,0", "gpu-threads" : "4,4,4,4", "gpu-engine" : "0-0,0-0,0-0,0-0", "gpu-fan" : "0-85,0-85,0-85,0-85", "gpu-memclock" : "0,0,0,0", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "85,85,85,85", "temp-target" : "75,75,75,75", "api-mcast-port" : "4028", windows 7 64 amd 14.6 Damn your config is a hot mess. What did you get this at? Like I don't even know where to start. You can't use intensity,xintensity, and rawintensity.. It doesn't work like that, Just choose one. I don't know what a good number is for your cards Your look up gap needs to be set to 2. set your gpu-threads to 2 Your setting your GPU engine to 0 Mhz.. Well not actually but its messed up. Either remove that flag or set the clocks via Sapphire TRIXX or MSI Afterburner. Same thing for gpu-memclock and gpu-vddc. Set your temps a lot lower. temp-target is fine at 75, temp over-heat I'd say 80, and cut off at 85... but on this kernel it doesn't even get that hot. You also need to set your fan speed via software or in your configuration. Look at my post- https://bitcointalk.org/index.php?topic=623409.msg7008775#msg7008775That config isn't for your card but it will give you a idea what it should look like. Also downgrade your drivers to 13.12, you'll thank me later Heat and frequency are no problem! I use marucoin this parameter can be run and there is no hw With 13.12 driver is ok? Ya 13.12 will be fine. 14.4 and 14.6 are very finicky atm with mining. I'd just avoid them till another driver comes out or just in general avoid it
|
BTC: 1NLNtXmdLVhS25xMk2neh2viHPDHEfdrGZ MYR: MQvEmxAhAhdN5rfmJsChJ3mN8CUEs9iCn6
|
|
|
scartstorm
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 07:21:32 AM |
|
Does anyone have the issue with Nicehash on these new miners when cards seem to be working, no HW errors present but no work being accepted either? I only get two lines repeating ad nauseum in the client: "Pool detected new block", followed by "Work restart requested".
Drivers are 14.4, cards are 270/280/7950 and the first Darkcoin release of the X11 works with Nicehash without issues. Since the old client works and new does without HW issues, I can't see how this could be a driver issue.
|
|
|
|
innergy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 07:22:03 AM |
|
What is your conf for r9 290 Tri-x for x13 ? I achieve only 2,5Mh/s . Thank you .
3x 290 - 8.65MH/s total with x13mod mining MARU. del *.bin setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1
sgminer -k x13mod -o stratum+tcp://maru.suprnova.cc:3131 -u ... -p ... -g 1 -w 128 --lookup-gap 2 --thread-concurrency 8192 --intensity 19 --gpu-engine 1030 --gpu-memclock 1350 --gpu-powertune 20 --auto-fan --temp-target 70
pause
12 hours later - no crashes, no SICK, no HW ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
andreydariy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 07:34:19 AM |
|
hi guys please write settings for 58xx 69xx. I get some errors with old cards/ 7970/7950/280x work fine I think the error is for older cards miner problem and not settings
|
|
|
|
bullus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 07:44:49 AM |
|
Change the kernel to marucoin , but it's not working
[09:42:56] Started sgminer 4.1.0 [09:42:56] Loaded configuration file H:\MINING\X13mod\configs\x13mod6970 [09:42:56] Kernel marucoin is experimental. [09:43:38] Error -11: Building Program (clBuildProgram) [09:43:38] Error compiling program for search.
Frontend phase failed compilation. Error: Creating kernel search failed!
[09:43:38] Failed to init GPU thread 0, disabling device 0 [09:43:38] Restarting the GPU from the menu will not fix this. [09:43:38] Try restarting sgminer. Press enter to continue:
"kernel" : "marucoin", "api-allow" : "W:127.0.0.1", "api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-only" : true, "kernel-path" : "/usr/local/bin", "log" : "5", "queue" : "1", "scan-time" : "7", "shares" : "0", "failover-switch-delay" : "1", "gpu-threads" : "2", "gpu-dyninterval" : "7", "gpu-engine" : "0", "gpu-fan" : "55", "gpu-platform" : "0", "gpu-memclock" : "0", "gpu-memdiff" : "0", "gpu-powertune" : "8", "gpu-vddc" : "0", "intensity" : "15", "temp-target" : "75", "temp-overheat" : "85", "temp-cutoff" : "95", "temp-hysteresis" : "3", "vectors" : "1", "worksize" : "128", "lookup-gap" : "0", "shaders" : "0", "thread-concurrency" : "8000", "no-pool-disable" : true, "device" : "0" }
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
3ham3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 07:55:05 AM |
|
Does anyone have the issue with Nicehash on these new miners when cards seem to be working, no HW errors present but no work being accepted either? I only get two lines repeating ad nauseum in the client: "Pool detected new block", followed by "Work restart requested".
Drivers are 14.4, cards are 270/280/7950 and the first Darkcoin release of the X11 works with Nicehash without issues. Since the old client works and new does without HW issues, I can't see how this could be a driver issue.
Turn on verbose in (d)isplay settings, does it show invalid nonce? I am having same issue no work being accepted.
|
|
|
|
scartstorm
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 08:07:55 AM Last edit: May 29, 2014, 08:21:17 AM by scartstorm |
|
Does anyone have the issue with Nicehash on these new miners when cards seem to be working, no HW errors present but no work being accepted either? I only get two lines repeating ad nauseum in the client: "Pool detected new block", followed by "Work restart requested".
Drivers are 14.4, cards are 270/280/7950 and the first Darkcoin release of the X11 works with Nicehash without issues. Since the old client works and new does without HW issues, I can't see how this could be a driver issue.
Turn on verbose in (d)isplay settings, does it show invalid nonce? I am having same issue no work being accepted. OK, thanks for the tip. On 270X, I enabled Verbose and lo and behold, that miner is now actually showing that it's working and producing WU's (which makes no sense!). I have not had any Accepted shares though in the client during 10 minutes or so, but the WU count is moving at a rapid pace. With the old Darkcoin client I had 0.015 or so WU/Minute, now I have 0.044. But as I said, no Accepted shares so far in the client, however Nicehash statistics does seem to show that the card is working. For my 280/7950 however, no effect. Both cards now display the status update every few seconds and all the numbers on those are 0. EDIT: I didn't do anything but everything is now working. 270x is pushing out a little under 2MH and 7950/280x are shooting out 3MH a piece. Insane performance!
|
|
|
|
stokecrypto
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 08:32:52 AM |
|
works fine, i get 3mh on r9 290 on x13
|
|
|
|
marklin
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 140
Merit: 10
Bitcore (BTX) anything is possible!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 08:52:10 AM |
|
What is your current configuration right now? can't help without knowing your config "intensity" : "18,18,18,18", "xintensity" : "0,0,0,0", "rawintensity" : "0,0,0,0", "worksize" : "128,128,128,128", "kernel" : "x13mod,x13mod,x13mod,x13mod", "lookup-gap" : "0,0,0,0", "thread-concurrency" : "0,0,0,0", "shaders" : "0,0,0,0", "gpu-threads" : "4,4,4,4", "gpu-engine" : "0-0,0-0,0-0,0-0", "gpu-fan" : "0-85,0-85,0-85,0-85", "gpu-memclock" : "0,0,0,0", "gpu-memdiff" : "0,0,0,0", "gpu-powertune" : "0,0,0,0", "gpu-vddc" : "0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,95", "temp-overheat" : "85,85,85,85", "temp-target" : "75,75,75,75", "api-mcast-port" : "4028", windows 7 64 amd 14.6 Damn your config is a hot mess. What did you get this at? Like I don't even know where to start. You can't use intensity,xintensity, and rawintensity.. It doesn't work like that, Just choose one. I don't know what a good number is for your cards Your look up gap needs to be set to 2. set your gpu-threads to 2 Your setting your GPU engine to 0 Mhz.. Well not actually but its messed up. Either remove that flag or set the clocks via Sapphire TRIXX or MSI Afterburner. Same thing for gpu-memclock and gpu-vddc. Set your temps a lot lower. temp-target is fine at 75, temp over-heat I'd say 80, and cut off at 85... but on this kernel it doesn't even get that hot. You also need to set your fan speed via software or in your configuration. Look at my post- https://bitcointalk.org/index.php?topic=623409.msg7008775#msg7008775That config isn't for your card but it will give you a idea what it should look like. Also downgrade your drivers to 13.12, you'll thank me later Heat and frequency are no problem! I use marucoin this parameter can be run and there is no hw With 13.12 driver is ok? Ya 13.12 will be fine. 14.4 and 14.6 are very finicky atm with mining. I'd just avoid them till another driver comes out or just in general avoid it Or not! I don't know why! I try to modify the XI and RI but I don't know how to change! "Xintensity rawintensity The two values
|
Bitcore (BTX) anything is possible!
|
|
|
bonosurgut
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 09:50:28 AM |
|
works fine, i get 3mh on r9 290 on x13
show config please
|
|
|
|
youngwebs
Legendary
Offline
Activity: 1080
Merit: 1055
DEV of DeepOnion community pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 29, 2014, 09:54:35 AM |
|
Will this software work for "older" generation AMD cards? like the HD4000 series (specific for me: HD 4870)?!
with x11, low heat, this will be still a bit profitable if this x11 mods works?
|
|
|
|
|