[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[bullus]

I think u compare your x11 hashrates and his x13 hashrate.
I have a 6970, with x11 ~2300kh/s, x13 ~1300kh/s

Yes , I missed the x13 part.

What  setting you running on your 6970 to get 2300khs?

Code:

"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"scrypt" : true,
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "55",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "18",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "0",
"shaders" : "1536",
"thread-concurrency" : "8000",
"no-pool-disable" : true,
"device" : "0"
}

960/1375

[sharnalk]

Hi, i'd like a little help.

While running sgminer (the one i get here ) with x11 or x13 mod  i have no Accepted nor Rejected,  only hardware errors.

I tried many option (no option too) but always the same.

I'm running on 280x win7 64   tried catalyst 14.4 & 14.6 (but for most of people 14.4 works pretty well)

I tried to install the 2.9 SDK but still nothing i'm a bit lost i can't figure out the source of this issue

[bullus]

Hi, i'd like a little help.

While running sgminer (the one i get here ) with x11 or x13 mod  i have no Accepted nor Rejected,  only hardware errors.

I tried many option (no option too) but always the same.

I'm running on 280x win7 64   tried catalyst 14.4 & 14.6 (but for most of people 14.4 works pretty well)

I tried to install the 2.9 SDK but still nothing i'm a bit lost i can't figure out the source of this issue

can u show ur config?

[sharnalk]

setx GPUMAXALLOCPERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer -k x11mod -o stratum+tcp://muga.nicemining.pw:3434 -u xxx.xxx -p xxxl -I 13 -g 2 -w 256 --thread-concurrency 8192  --gpu-engine 1070 --gpu-memclock 1500 --vectors 1
pause

It's the last i tried, but i have tried many different configurations ...

[bullus]

setx GPUMAXALLOCPERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer -k x11mod -o stratum+tcp://muga.nicemining.pw:3434 -u xxx.xxx -p xxxl -I 13 -g 2 -w 256 --thread-concurrency 8192  --gpu-engine 1070 --gpu-memclock 1500 --vectors 1
pause

It's the last i tried, but i have tried many different configurations ...

Can u delete the last 3 parameters en use -I 16 and use stock clocks with msi ab and check ur clocks and voltage, also delete the bin files.

[sharnalk]

I still have the same issue :/  (i loaded the original profile, and according to sensors everything is running at the stock frequencies/voltage)

Edit: I don't think it's an issue on sgminer, but have no clue about what could be missconfigured on my PC

[mirny]

any working config for AMD 5870 pls?
I'm trying to make it work for 3 days, but I'm getting nothing, but HW errors,
trying with X13modold, any suggestions?

[deznuts]

any working config for AMD 5870 pls?
I'm trying to make it work for 3 days, but I'm getting nothing, but HW errors,
trying with X13modold, any suggestions?

Works just fine on my 5970. Need to make sure you run with --kernel x13modold.

[mirny]

any working config for AMD 5870 pls?
I'm trying to make it work for 3 days, but I'm getting nothing, but HW errors,
trying with X13modold, any suggestions?

Works just fine on my 5970. Need to make sure you run with --kernel x13modold.

I wrote that I'm trying with x13modold,
can you post your config?

[Blago]

any working config for AMD 5870 pls?
I'm trying to make it work for 3 days, but I'm getting nothing, but HW errors,
trying with X13modold, any suggestions?

Works just fine on my 5970. Need to make sure you run with --kernel x13modold.

I wrote that I'm trying with x13modold,
can you post your config?

post https://bitcointalk.org/index.php?topic=623409.msg7154535#msg7154535

[deznuts]

any working config for AMD 5870 pls?
I'm trying to make it work for 3 days, but I'm getting nothing, but HW errors,
trying with X13modold, any suggestions?

Works just fine on my 5970. Need to make sure you run with --kernel x13modold.

I wrote that I'm trying with x13modold,
can you post your config?

-I 18 -g 1 -w 64 --no-submit-stale --kernel x13modold

[tanil]

My sph sgminer always stops.


Windows makes stopped  after 2-3 hours working.

[mirny]

deznuts, Blago

thank you guys I've already seen that post,
but I'm a dickhead, that was my oldest rig,
so I forget that I had installed Catalyst 13.1,
Now it's working.
So definitely for others, Catalyst 13.1 is not working at all with this miner.
Once again, thank you both.

[xingqiaoyin]

I still have the same issue :/  (i loaded the original profile, and according to sensors everything is running at the stock frequencies/voltage)

Edit: I don't think it's an issue on sgminer, but have no clue about what could be missconfigured on my PC

You forgot to mention what card you are using.

[GunPowder]

Could anybody share good X13 settings for Sapphire 7970 "Vapor-X", "Dual-X"
Settins I use give me ~2500 Kh per each, but cards are crashing time to time

"kernel" : "x13mod",
"worksize" : "128",
"gpu-threads" : "2",
"intensity" : "17",
"gpu-engine" : "1075",
"gpu-memclock" : "1500",
"thread-concurrency" : "0", (cards set it to 22336 by itself)

Run on PiPM

Thank you

[SupercellKid]

Yeh im running the x13 kernel on an R9 280x with Win 7 - 64bit and getting intermittent crashes (GPU Crashes) have constantly restart miner :/ Any and all help appreciated. Tried all sorts of settings and keep getting GPU crashes / Resets. Could the guys compiling/developing this please have a look into this as I have noticed some others with similar issues.

Failing that, is there another x13 Windows Miner available that I can use untill the GPU Crash issues are sorted? Thanks Heaps

I just tried X11 using this miner and having same issue. I have no problem using other miners for X11 like the one from Darktalk.org but for some reason after 20 or 30 accepted shares GPU crashes. If any one knows what causing this I would love to know.

My Basic Settings are as follows, but I have tried many combinations of intensity, GPU Core speed, work size, voltage etc, but all eventually crash

I am using CGWatcher so theres a few extra settings there so the miner can be monitored, but they shouldn't interfere with miner

X13:
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"scan-time" : "30",
"auto-fan" : true,
"auto-gpu" : true,
"gpu-threads" : "2",
"gpu-engine" : "1150-1150",
"gpu-fan" : "45-100",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"intensity" : "16",
"kernel" : "x13mod",
"temp-target" : "65",
"temp-overheat" : "82",
"temp-cutoff" : "85",
"temp-hysteresis" : "2",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "0",
"shaders" : "2048",
"thread-concurrency" : "0",
"vector" : "1"
}

X11:
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"auto-fan" : true,
"auto-gpu" : true,
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1150-1150",
"gpu-fan" : "45-100",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"intensity" : "16",
"kernel" : "x11mod",
"temp-hysteresis" : "3",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "2048",
"failover-switch-delay" : "60",
"no-pool-disable" : true,
"tcp-keepalive" : "30"

[lasybear]

Could anybody share good X13 settings for Sapphire 7970 "Vapor-X", "Dual-X"
Settins I use give me ~2500 Kh per each, but cards are crashing time to time

"kernel" : "x13mod",
"worksize" : "128",
"gpu-threads" : "2",
"intensity" : "17",
"gpu-engine" : "1075",
"gpu-memclock" : "1500",
"thread-concurrency" : "0", (cards set it to 22336 by itself)

Run on PiPM

Thank you

r9 280x (aka 7970) Dual-X 2500kh/s

Code:

"rawintensity" : "81920",
"worksize" : "64",
"gpu-engine" : "1000-1030",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-threads" : "2",
"kernel" : "x13mod",

[GunPowder]

r9 280x (aka 7970) Dual-X 2500kh/s

Code:

"rawintensity" : "81920",
"worksize" : "64",
"gpu-engine" : "1000-1030",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-threads" : "2",
"kernel" : "x13mod",

Intensity is ..?

upd
ops, sorry, you use "rawintensity"
no idea what is it, but will try
thanx a lot

[Amph]

r9 280x (aka 7970) Dual-X 2500kh/s

Code:

"rawintensity" : "81920",
"worksize" : "64",
"gpu-engine" : "1000-1030",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-threads" : "2",
"kernel" : "x13mod",

Intensity is ..?

upd
ops, sorry, you use "rawintensity"
no idea what is it, but will try
thanx a lot

xintensity should be better than raw especially for 290

with 280x i tried it but no difference in comparison with regular intensity

[dragonmike]

I have a mining rig with 6x Asus R9280X DC2T-3GD5 running Pimp and a PC with one of these inside as well (but watercooled) running Win 8.1.

I run x13mod on the PC with 4 gpu threads, but that setting will crash on the mining rig. Maybe Linux doesn't like it like that

On my windows pc it increases hash rate quite a bit actually, so worth giving it a go if you run a 280x.