DARKANGEL6415
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2014, 09:47:21 PM |
|
is there a reason why they say dont go past I 15 i normally run my card between 17 - 19 granted its on N scrypt or just scrypt
you just answered your own question lol its not answering my question so i just put it at 17 and seems to be running fine 1 hour in getting about 800 kh more total from my 3 cards, but if there is a legit reason please tell me i seen something about a 2% but did not quite understand it
|
|
|
|
teknohog
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2014, 10:10:39 PM |
|
Is there a command to automatically decrease the GPU workload, for example, when streaming a movie. I have some stuttering and a lot of artifacts while the SGminer is running. It would be excellent if the GPU workload was maximized only when the computer is idle. "GPU_MAX_ALLOC_PERCENT" does not seem to affect this.
This is what dynamic intensity is for. You can set this in the running miner by pressing G, I and D (in case of a single GPU) or G, I, 2, D for GPU #2. Alternatively, use "d" instead of the intensity number in your config. IMHO, it's better to keep a fixed, high intensity otherwise, but you can set it to dynamic for the movie, and then back.
|
|
|
|
DARKANGEL6415
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 22, 2014, 11:45:11 PM |
|
Is there a command to automatically decrease the GPU workload, for example, when streaming a movie. I have some stuttering and a lot of artifacts while the SGminer is running. It would be excellent if the GPU workload was maximized only when the computer is idle. "GPU_MAX_ALLOC_PERCENT" does not seem to affect this.
This is what dynamic intensity is for. You can set this in the running miner by pressing G, I and D (in case of a single GPU) or G, I, 2, D for GPU #2. Alternatively, use "d" instead of the intensity number in your config. IMHO, it's better to keep a fixed, high intensity otherwise, but you can set it to dynamic for the movie, and then back. now that my friend is interesting to know even though i did not ask the question the answer appeals to me ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
nfox
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 12:24:42 AM |
|
[00:22:05] Initialising kernel x11mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024 [00:22:05] Error -46: Creating Kernel from program. (clCreateKernel)
With that x11mod.cl
|
|
|
|
chadwickx16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 12:47:02 AM |
|
Will this work for 7950's? I've seen report of all the R9's but no 7900 series card?
|
|
|
|
genebart
Newbie
Offline
Activity: 18
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 02:34:17 AM |
|
Anyone have a working link to Cooler's file? The one he posted seems to be dead to me.
|
|
|
|
jamestown2035
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 11:41:32 AM |
|
Any one else getting a 100% CPU load when running this?
|
|
|
|
jamestown2035
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 11:42:22 AM |
|
Will this work for 7950's? I've seen report of all the R9's but no 7900 series card? 7970's work I would imagine 7950's too.
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 12:15:04 PM |
|
Any one else getting a 100% CPU load when running this?
check your processes, you might have a virus
|
|
|
|
jamestown2035
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 01:14:48 PM |
|
That's what I'm thinking but my only process running is sgminer showing 99%
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 02:08:54 PM |
|
That's what I'm thinking but my only process running is sgminer showing 99%
what sgminer you get? probably a malicious one running your pc as a botnet
|
|
|
|
jamestown2035
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 03:12:47 PM |
|
I have 2 machines running this with 14.6 drivers. one machine is showing normal cpu usage. The other is showing 100%. Both only show one process sgminer*32. The only difference between the 2 machines is I had slimcoin miner on the one acting funny, but nobody is answering my questions there. This issue started over the weekend and the only downloads I made were these kernels and the slimcoin wallet. I've since removed the slimcoin wallet and the miner and still having the issue. I don't want to accuse slimcoin of this, as if may have been due to something else. I just trying to see if anyone experiencing the same issues.
|
|
|
|
jamestown2035
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 03:16:21 PM |
|
Also i have normal cpu usage until I run sgminer, even if I run CGminer I still get 100% usage I was thinking maybe it was the drivers, but since the other machine isn't doing it I'm kind of stumped.
|
|
|
|
chadwickx16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 05:35:43 PM |
|
Will this work for 7950's? I've seen report of all the R9's but no 7900 series card? 7970's work I would imagine 7950's too. Thanks! I'll be trying this later. And I'll report back.
|
|
|
|
korobass
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 06:31:25 PM |
|
Also i have normal cpu usage until I run sgminer, even if I run CGminer I still get 100% usage I was thinking maybe it was the drivers, but since the other machine isn't doing it I'm kind of stumped.
If you're using a Linux, try to add LD_LIBRARY_PATH to point to your driver directory in your startup script. For example: export LD_LIBRARY_PATH=/usr/lib/fglrx:$LD_LIBRARY_PATH
|
|
|
|
deznuts
Newbie
Offline
Activity: 44
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 06:40:09 PM |
|
New files working well with the 290x, 7970, and 7950 in both x11 and x13. Didn't add any performance to the 5970 sadly. All tested with the beta 14.6 driver.
|
|
|
|
oneoff
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 23, 2014, 06:45:15 PM |
|
Is there a command to automatically decrease the GPU workload, for example, when streaming a movie. I have some stuttering and a lot of artifacts while the SGminer is running. It would be excellent if the GPU workload was maximized only when the computer is idle. "GPU_MAX_ALLOC_PERCENT" does not seem to affect this.
This is what dynamic intensity is for. You can set this in the running miner by pressing G, I and D (in case of a single GPU) or G, I, 2, D for GPU #2. Alternatively, use "d" instead of the intensity number in your config. IMHO, it's better to keep a fixed, high intensity otherwise, but you can set it to dynamic for the movie, and then back. Thanks. It works good, I prefer some K/hash loss instead of activating/deactivating every time I'm doing something on my computer. Not mention when someone in my family want to stream something. Let's see if it is stable...
|
Maybe I should code a Tipping bot, instead of these well-known DDos bots. I would tip your Wallets until these were overloaded.
|
|
|
old_pioner
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 12:33:17 AM |
|
X13 mining with -k x13modold is working for amd h5xxx and h6xxx ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?? Cause i can't get it work..... only HW Only HW too on 7870 sgminer.exe -k x13mod -w 128 --gpu-powertune 10 --no-submit-stale --thread-concurrency 5120 -X 300 and sgminer.exe -k x13mod (no options) same issue
|
|
|
|
124C41
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 308
Merit: 250
EVERYTHING YOU CAN IMAGINE IS REAL
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 02:19:18 AM |
|
Will this work with drivers 14.4 or earlier? I know it says 14.6 only but I read somewhere that it worked without it.
|
Whether you think you can, or you think you can't - you're right. BTC: 1Ex3zmaHoqbMBUWQVcG7kdTCktyng7Ld9M LTC: Lhrp8G9EjoyKCqKAmtuprUcV9KvqZQKAfk
|
|
|
ebliever
Legendary
Offline
Activity: 1708
Merit: 1036
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 24, 2014, 03:21:33 AM |
|
Will this work with drivers 14.4 or earlier? I know it says 14.6 only but I read somewhere that it worked without it. I think it works with older versions, you just don't see a boost. I've save the old kernel files and just replace them if the new ones give you any trouble.
|
Luke 12:15-21
Ephesians 2:8-9
|
|
|
|