[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[mison]

Any help for 290 config file ?

X11 / X13 ?

Please share...

Sharing IS caring...

I'm sure it's not best configs, but they work stable for me
R9 290, AMD v14.6rc2 + AB for UV, sgminer v4.1.0

~5.1 Mh, t < 80 deg (gpu uv) "kernel" : "x11mod", "intensity" : "0", "xintensity" : "50", "rawintensity" : "0", "worksize" : "64", "gpu-threads" : "2", "lookup-gap" : "0", "thread-concurrency" : "8192", "shaders" : "2560", "gpu-engine" : "1000-1000", "gpu-memclock" : "1200", "gpu-fan" : "50-60", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "gpu-dyninterval" : "7", "gpu-platform" : "0", "temp-target" : "75", "temp-overheat" : "85", "temp-cutoff" : "95", "temp-hysteresis" : "3", "no-submit-stale" : true, "no-pool-disable" : true, "failover-only" : true, "failover-switch-delay" : "60", "queue" : "1", "scan-time" : "7", "shares" : "0", "tcp-keepalive" : "30", "expiry" : "28", "log" : "5", "kernel-path" : "/usr/local/bin", "api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "api-allow" : "W:127.0.0.1"

~3.6 Mh, t < 80 deg (gpu uv) "kernel" : "x13mod", "intensity" : "17", "xintensity" : "0", "rawintensity" : "0", "worksize" : "64", "gpu-threads" : "2", "lookup-gap" : "0", "thread-concurrency" : "8192", "shaders" : "2560", "gpu-engine" : "1000-1000", "gpu-memclock" : "1200", "gpu-fan" : "60-60", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "gpu-dyninterval" : "7", "gpu-platform" : "0", "temp-target" : "75", "temp-overheat" : "85", "temp-cutoff" : "95", "temp-hysteresis" : "3", "no-submit-stale" : true, "no-pool-disable" : true, "failover-only" : true, "failover-switch-delay" : "60", "queue" : "1", "scan-time" : "7", "shares" : "0", "tcp-keepalive" : "30", "expiry" : "28", "log" : "5", "kernel-path" : "/usr/local/bin", "api-listen" : true, "api-port" : "4028", "api-mcast-port" : "4028", "api-allow" : "W:127.0.0.1"

this is most important for speed and stability   for fine tuning   <---   <---   <---   <---   <---

hope it will help  

I was try it on my R9 290 rig, but it did only about 2,5Mh at X13. It wrote something about some part of config did not loaded. Have someone similar issue? What API parameter mean? Why it want to connect to the network? I am using sgminer 4.1.0 without api and it working about 3,6Mh at x11 and 2,55Mh at x13.

[steven6489]

I was try it on my R9 290 rig, but it did only about 2,5Mh at X13. It wrote something about some part of config did not loaded. Have someone similar issue?

Some parts of config not loaded is due to the "intensity" : "0" and "rawintensity" : "0"..remove both lines will be fine..

Yeah..same here..X13 running 2.6mh/s max using his config.. 

[chadwickx16]

Hello all

3.15 Mhs X13 R9 280X  it's ok ?

Yeah, I'm getting 2.6 out of my 7950's. Rocking the old school still!

[steven6489]

Hello all

3.15 Mhs X13 R9 280X  it's ok ?

Yeah, I'm getting 2.6 out of my 7950's. Rocking the old school still!

Can you share your X13 config for your 7950? which 7950 u using? 

[chadwickx16]

Hello all

3.15 Mhs X13 R9 280X  it's ok ?

Yeah, I'm getting 2.6 out of my 7950's. Rocking the old school still!

Can you share your X13 config for your 7950? which 7950 u using? 

Code:

    "worksize": "256",
    "intensity" : "20",
    "gpu-engine" : "1075",
    "gpu-fan" : "80-100",
    "gpu-memclock" : "1375",
    "gpu-threads" : "2",

[Chacel]

Hello all

3.15 Mhs X13 R9 280X  it's ok ?

Yeah, I'm getting 2.6 out of my 7950's. Rocking the old school still!

Can you share your X13 config for your 7950? which 7950 u using?  

Nice on mine last 7950 - 2.55 // but "I 16" // tested "I 20" + and your mem/engine - works ok 62C 52% fan

[chadwickx16]

Hello all

3.15 Mhs X13 R9 280X  it's ok ?

Yeah, I'm getting 2.6 out of my 7950's. Rocking the old school still!

Can you share your X13 config for your 7950? which 7950 u using? 

I'm using, twinfrozr, gigabyte, sapphire, and reference models. A bunch of different accumulated over the year.

[Chacel]

Hello all

3.15 Mhs X13 R9 280X  it's ok ?

Yeah, I'm getting 2.6 out of my 7950's. Rocking the old school still!

Can you share your X13 config for your 7950? which 7950 u using? 

I'm using, twinfrozr, gigabyte, sapphire, and reference models. A bunch of different accumulated over the year.

On X13 nere all use ~same configs

[chadwickx16]

Hello all

3.15 Mhs X13 R9 280X  it's ok ?

Yeah, I'm getting 2.6 out of my 7950's. Rocking the old school still!

Can you share your X13 config for your 7950? which 7950 u using? 

I'm using, twinfrozr, gigabyte, sapphire, and reference models. A bunch of different accumulated over the year.

On X13 nere all use ~same configs

Yes? I think. What's nere?

[GGin]

5.2 and 5 using GGin config.

sgminer 4.1 ( think I am using https://bitcointalk.org/index.php?topic=658411.0;topicseen )

win8.1
14.6 rc2

hyperv2012r2 trial
14.6rc2

https://www.anonimg.com/img/13ce720f903bf78e589b2e81ef864f73.png

Code:

"kernel" : "x11mod",
"intensity" : "0",
"xintensity" : "50",
"rawintensity" : "0",
"worksize" : "256",
"gpu-threads" : "2",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"shaders" : "2560",
"gpu-engine" : "1020,1020",
"gpu-memclock" : "1250",
"gpu-fan" : "50-60",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"no-submit-stale" : true,
"no-pool-disable" : true,
"failover-only" : true,
"failover-switch-delay" : "60",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"tcp-keepalive" : "30",
"expiry" : "28",
"log" : "5",
"kernel-path" : "/usr/local/bin",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"api-allow" : "W:127.0.0.1"
}

I follow exactly for my Asus R9 290..it just cant get the hashrate u all getting..I'm not sure why..Currently max I can go is 3.6mh/s driver 13.12 with the below config..


"intensity" : "20",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "24550",
"shaders" : "2560",
"gpu-threads" : "1",
"gpu-engine" : "1030",
"gpu-fan" : "60",
"gpu-memclock" : "1400",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "92",
"temp-overheat" : "90",
"temp-target" : "88",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"

https://dl.dropboxusercontent.com/u/44817695/x1111.PNG

I found out the if I update the driver to 14.6RC2, my sgminer will have more HW errors..

for the speed boost you should use kernel x11/x13mod and clean install new drivers v14.6/rc2, like this: https://bitcointalk.org/index.php?topic=623409.msg7642920#msg7642920

for to fix the HW at amd v14.6/rc2 errors follow this post: https://bitcointalk.org/index.php?topic=658438.msg7555998#msg7555998

[GGin]

Any help for 290 config file ?

X11 / X13 ?

Please share...

Sharing IS caring...

I'm sure it's not best configs, but they work stable for me
R9 290, AMD v14.6rc2 + AB for UV, sgminer v4.1.0

~5.1 Mh, t < 80 deg (gpu uv) "kernel" : "x11mod", "intensity" : "0", "xintensity" : "50", "rawintensity" : "0", "worksize" : "64", "gpu-threads" : "2", "lookup-gap" : "0", "thread-concurrency" : "8192", "shaders" : "2560", "gpu-engine" : "1000-1000", "gpu-memclock" : "1200", "gpu-fan" : "50-60", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "gpu-dyninterval" : "7", "gpu-platform" : "0", "temp-target" : "75", "temp-overheat" : "85", "temp-cutoff" : "95", "temp-hysteresis" : "3", "no-submit-stale" : true, "no-pool-disable" : true, "failover-only" : true, "failover-switch-delay" : "60", "queue" : "1", "scan-time" : "7", "shares" : "0", "tcp-keepalive" : "30", "expiry" : "28", "log" : "5", "kernel-path" : "/usr/local/bin", "api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "api-allow" : "W:127.0.0.1"

~3.6 Mh, t < 80 deg (gpu uv) "kernel" : "x13mod", "intensity" : "17", "xintensity" : "0", "rawintensity" : "0", "worksize" : "64", "gpu-threads" : "2", "lookup-gap" : "0", "thread-concurrency" : "8192", "shaders" : "2560", "gpu-engine" : "1000-1000", "gpu-memclock" : "1200", "gpu-fan" : "60-60", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "gpu-dyninterval" : "7", "gpu-platform" : "0", "temp-target" : "75", "temp-overheat" : "85", "temp-cutoff" : "95", "temp-hysteresis" : "3", "no-submit-stale" : true, "no-pool-disable" : true, "failover-only" : true, "failover-switch-delay" : "60", "queue" : "1", "scan-time" : "7", "shares" : "0", "tcp-keepalive" : "30", "expiry" : "28", "log" : "5", "kernel-path" : "/usr/local/bin", "api-listen" : true, "api-port" : "4028", "api-mcast-port" : "4028", "api-allow" : "W:127.0.0.1"

this is most important for speed and stability   for fine tuning   <---   <---   <---   <---   <---

hope it will help  

I was try it on my R9 290 rig, but it did only about 2,5Mh at X13. It wrote something about some part of config did not loaded. Have someone similar issue? What API parameter mean? Why it want to connect to the network? I am using sgminer 4.1.0 without api and it working about 3,6Mh at x11 and 2,55Mh at x13.

look at this post: https://bitcointalk.org/index.php?topic=623409.msg7757878#msg7757878

api in my config mean that I use CGWatcher - highly recommend!
for to disable api you can remove this line: "api-listen" : true,

Intensity/Xintensity/rAwintensity - you must use one of them only for each card, so it doesn't matter if you will remove that you don't use or not.

[tygarbyte]

5.2 and 5 using GGin config.

sgminer 4.1 ( think I am using https://bitcointalk.org/index.php?topic=658411.0;topicseen )

win8.1
14.6 rc2

hyperv2012r2 trial
14.6rc2

I follow exactly for my Asus R9 290..it just cant get the hashrate u all getting..I'm not sure why..Currently max I can go is 3.6mh/s driver 13.12 with the below config..




I found out the if I update the driver to 14.6RC2, my sgminer will have more HW errors..

for the speed boost you should use kernel x11/x13mod and clean install new drivers v14.6/rc2, like this: https://bitcointalk.org/index.php?topic=623409.msg7642920#msg7642920

for to fix the HW at amd v14.6/rc2 errors follow this post: https://bitcointalk.org/index.php?topic=658438.msg7555998#msg7555998

My cards are saphire r9 290 tri-x, other miner at work gets 5MHs on his stock R290.
Also i have disabled xfire.

[steven6489]

for the speed boost you should use kernel x11/x13mod and clean install new drivers v14.6/rc2, like this: https://bitcointalk.org/index.php?topic=623409.msg7642920#msg7642920

for to fix the HW at amd v14.6/rc2 errors follow this post: https://bitcointalk.org/index.php?topic=658438.msg7555998#msg7555998

Thanks for your help..

Running the same speed with u now..

[pyds1977]

Just have a look at the performance of our miner!! What's the  temperature and fan speed of your X11 mining?   

My R280X,
3.9Mhs, 74 C, 2700RPM

[Chacel]

Hello all

3.15 Mhs X13 R9 280X  it's ok ?

Yeah, I'm getting 2.6 out of my 7950's. Rocking the old school still!

Can you share your X13 config for your 7950? which 7950 u using? 

I'm using, twinfrozr, gigabyte, sapphire, and reference models. A bunch of different accumulated over the year.

On X13 nere all use ~same configs

Yes? I think. What's nere?

Little +/- on engine

[unitedminers]

SPH-SGMiner works great with Nist5

How about X15?

[SavageWS6]

6 Days straight so far, no issues here. X11mod

280x > 270 > 270 > 270

[Chacel]

Nice time, but 280x can make more ~0.2mhs on x11 ofc.

[steven6489]

6 Days straight so far, no issues here. X11mod

280x > 270 > 270 > 270

https://i.imgur.com/jlYMjBc.jpg

Hi,

Mind to share your 280x config? Which 280x you using? Also Windows and AMD driver version..
The sgminer is that the version you downloaded from first post? 

[SavageWS6]

6 Days straight so far, no issues here. X11mod

280x > 270 > 270 > 270

Hi,

Mind to share your 280x config? Which 280x you using? Also Windows and AMD driver version..
The sgminer is that the version you downloaded from first post?  

Nice time, but 280x can make more ~0.2mhs on x11 ofc.

Sapphire 280X w/ Stilt BIOS Dual-X Windows 8.1 x64, 14.6 Drivers @ 1150 mV using TRIXX. My card is subborn so that's why it's only hashing at that rate. And yes I think I'm using sgminer version from the first post, I don't remember

First values are the 280x

"intensity" : "18,17,17,17",
"thread-concurrency" : "8192,6401,6401,6401",
"lookup-gap" : "2",
"gpu-threads" : "2",
"worksize" : "256,128,128,128",
"expiry" : "1",
"queue" : "1",
"gpu-engine" : "1120,1120,1120,1110",
"gpu-memclock" : "1500,1500,1500,1500",